summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/bcm
AgeCommit message (Collapse)Author
5 daysMerge tag 'pinctrl-v7.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ...
2026-08-06pinctrl: Use IRQ trigger mask helpersMaulik Shah
Use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH instead of open-coded trigger type combinations in irqchip callbacks. No functional change intended. Assisted-by: Claude:claude-sonnet-5 Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-07-30gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callbackYu-Chun Lin
Extend the reg_mask_xlate callback with an operation type parameter (enum gpio_regmap_operation) to allow drivers to return different register/mask combinations depending on the specific GPIO operation. Consequently, update all existing drivers utilizing the gpio-regmap framework (across drivers/gpio, drivers/iio, and drivers/pinctrl) to accommodate the new reg_mask_xlate function signature. Acked-by: William Breathitt Gray <wbg@kernel.org> Acked-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> #for-iio Suggested-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com> Link: https://patch.msgid.link/20260726125209.140307-6-eleanor.lin@realtek.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-07-25pinctrl: bcm: Remove redundant dev_err()Pan Chuang
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in devm_request_*_irq()"), devm_request_irq() automatically logs detailed error messages on failure. Remove the now-redundant driver-specific dev_err() calls. Signed-off-by: Pan Chuang <panchuang@vivo.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-07-24pinctrl: fix unmet dependencies from missing GPIOLIBJulian Braha
These 4 options, PINCTRL_PIC32, PINCTRL_PIC32, PINCTRL_IPROC_GPIO, and PINCTRL_NSP_GPIO all select GPIOLIB_IRQCHIP without ensuring GPIOLIB is enabled, causing unmet dependencies, such as: WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_PIC32 [=y] && PINCTRL [=y] && OF [=y] && (MACH_PIC32 || COMPILE_TEST [=y]) Similar options in this subsystem select GPIOLIB, so let's do the same here. These unmet dependency bugs were found by kconfirm, a static analysis tool for Kconfig. Fixes: 2ba384e6c381 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver") Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Fixes: b64333ce769c ("pinctrl: cygnus: add gpio/pinconf driver") Fixes: 8bfcbbbcabe0 ("pinctrl: nsp: add gpio-a driver support for Broadcom NSP SoC") Signed-off-by: Julian Braha <julianbraha@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-07-03Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c ↵Uwe Kleine-König (The Capable Hub)
files) Replace the #include of <linux/mod_devicetable.h> by the more specific <linux/device-id/*.h> where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
2026-06-30pinctrl: bcm2835: Don't remove an unregistered GPIO chipDaniel McCarthy
If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by: Daniel McCarthy <daniel@dragonzap.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-06-13pinctrl: Match DT helper typesRob Herring (Arm)
The affected pinctrl drivers either check for the presence of a standard property or read a property documented with an 8-bit cell encoding. Using boolean or u32 helpers for those cases disagrees with the binding. Use a presence helper for "gpio-ranges" and read "microchip,spi-present-mask" with the u8 helper documented by the binding. Assisted-by: Codex:gpt-5-5 Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-05-27pinctrl: bcm: fix SPDX comment style in headerMayur Kumar
Header files should use the C-style '/*' block comment for SPDX license identifiers. Correct the style in pinctrl-bcm63xx.h to satisfy checkpatch requirements. Signed-off-by: Mayur Kumar <kmayur809@gmail.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-05-06pinctrl: bcm: Move MODULE_DEVICE_TABLE next to the table itselfKrzysztof Kozlowski
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it exports, because this is easier to read and verify. It also makes more sense since #ifdef for ACPI or OF could hide both of them. Most of the pin controller drivers already have this correctly placed, so adjust the other drivers. No functional impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-03-10pinctrl: Kconfig: drop unneeded dependencies on OF_GPIOBartosz Golaszewski
OF_GPIO is selected automatically on all OF systems. Any symbols it controls also provide stubs so there's really no reason to select it explicitly. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2025-09-08pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVELLinus Walleij
This generic pin config property is confusingly named so let's rename it to make things clearer. There are already drivers in the tree that use PIN_CONFIG_OUTPUT to *read* the value of an output driven pin, which is a big semantic confusion for the head: are we then reading the setting of the output or the actual value/level that is put out on the pin? We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver buffers for output, so this can by logical conclusion only drive the voltage level if it should be any different. But if we read the pin, are we then reading the *setting* of the output value or the *actual* value we can see on the line? If the pin has not first been set into output mode with PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode or tristate, what will reading this property actually return? Reading the current users reading this property it is clear that what we read is the logical level of the pin as 0 or 1 depending on if it is low or high. Rename it to PIN_CONFIG_LEVEL so it is crystal clear that we set or read the voltage level of the pin and nothing else. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-09-08pinctrl: bcm: Add STB family pin controller driverIvan T. Ivanov
This driver provide pin muxing and configuration functionality for BCM2712 SoC used by RPi5. According to [1] this chip is an instance of the one used in Broadcom STB product line. [1] https://lore.kernel.org/lkml/f6601f73-cb22-4ba3-88c5-241be8421fc3@broadcom.com/ Cc: Jonathan Bell <jonathan@raspberrypi.com> Cc: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Andrea della Porta <andrea.porta@suse.com> [linusw: Enable also for ARCH_BCM2835] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-08-19pinctrl: bcm: use PTR_ERR_OR_ZERO() to simplify codeXichao Zhao
Use the standard error pointer macro to shorten the code and simplify. Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Link: https://lore.kernel.org/20250812081243.22659-1-zhao.xichao@vivo.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-08-07treewide: rename GPIO set callbacks back to their original namesBartosz Golaszewski
The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-06-18pinctrl: bcm: cygnus-nsp: Move fixed assignments to 'pinctrl_desc' definitionKrzysztof Kozlowski
Assign 'struct pinctrl_desc' .npins member in definition to make clear that number of pins is fixed and have less code in the probe. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-10-b11c1d650384@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-18pinctrl: bcm: cygnus-ns2: Move fixed assignments to 'pinctrl_desc' definitionKrzysztof Kozlowski
Assign 'struct pinctrl_desc' .npins member in definition to make clear that number of pins is fixed and have less code in the probe. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-9-b11c1d650384@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-18pinctrl: bcm: cygnus-mux: Move fixed assignments to 'pinctrl_desc' definitionKrzysztof Kozlowski
Assign 'struct pinctrl_desc' .npins member in definition to make clear that number of pins is fixed and have less code in the probe. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-8-b11c1d650384@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-18pinctrl: bcm: Constify static 'pinctrl_desc'Krzysztof Kozlowski
The local static 'struct pinctrl_desc' is not modified, so can be made const for code safety. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-7-b11c1d650384@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm2835: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-3-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: iproc-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-2-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: nsp-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-1-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-17pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()Dan Carpenter
The next line checks if this regmap_write() failed, but it doesn't work because the assignment was accidentally left out. Add the assignment. Fixes: 60d69769c851 ("pinctrl: bcm281xx: Add support for BCM21664 pinmux") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/dfc15d59-7fa9-4f96-aacb-37c3df6d420d@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Add support for BCM21664 pinmuxArtur Weber
BCM21664 is another chip from the Kona line of Broadcom SoCs, and its pinmux shares a lot of similarities with the BCM281xx pinmux. Add support for the BCM21664 pinmux controller to the BCM281xx driver. This also enables pinmux support for the BCM23550, which has an identical pinmux config to the BCM21664 (hence they can share a single compatible, brcm,bcm21664-pinctrl). Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-4-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Provide pinctrl device info as OF platform dataArtur Weber
Introduce a new struct type, "bcm281xx_pinctrl_info", that holds information about the pins, pin functions and regmap config for a pin control chip. Create such a struct for the BCM218xx and pass it as device data for the OF compatible match. This is done in preparation for introducing additional chip types to the driver. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-3-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"Artur Weber
Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch warnings. No functional change. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-2-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-04pinctrl: bcm2835: don't -EINVAL on alternate funcs from get_direction()Bartosz Golaszewski
Since commit 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") we check the return value of the get_direction() callback as per its API contract. This driver returns -EINVAL if the pin in question is set to one of the alternative (non-GPIO) functions. This isn't really an error that should be communicated to GPIOLIB so default to returning the "safe" value of INPUT in this case. The GPIO subsystem does not have the notion of "unknown" direction. Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/20250219102750.38519-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-01-15pinctrl: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/20250114203602.1013275-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-11-22Fix a potential abuse of seq_printf() format string in driversDavid Wang
Using device name as format string of seq_printf() is proned to "Format string attack", opens possibility for exploitation. Seq_puts() is safer and more efficient. Signed-off-by: David Wang <00107082@163.com> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20241120053055.225195-1-00107082@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-24pinctrl: bcm2835: fix module autoloadingLiao Chen
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/20240820122604.42736-1-liaochen4@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-07-21Merge tag 'pinctrl-v6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Some new drivers is the main part, the rest is cleanups and nonurgent fixes. Nothing much special about this, no core changes this time. New drivers: - Renesas RZ/V2H(P) SoC - NXP Freescale i.MX91 SoC - Nuvoton MA35D1 SoC - Qualcomm PMC8380, SM4250, SM4250 LPI Enhancements: - A slew of scoped-based simplifications of of_node_put()" * tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits) pinctrl: renesas: rzg2l: Support output enable on RZ/G2L pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions pinctrl: renesas: rzg2l: Clarify OEN read/write support dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties pinctrl: freescale: Use scope based of_node_put() cleanups pinctrl: equilibrium: Use scope based of_node_put() cleanups pinctrl: ti: iodelay: Use scope based of_node_put() cleanups pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32 pinctrl: cy8c95x0: Update cache modification pinctrl: cy8c95x0: Use cleanup.h pinctrl: renesas: r8a779h0: Remove unneeded separators pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function pinctrl: renesas: r8a779g0: Remove unneeded separators pinctrl: renesas: r8a779h0: Add AVB MII pins and groups pinctrl: renesas: r8a779g0: Fix TPU suffixes pinctrl: renesas: r8a779g0: Fix TCLK suffixes pinctrl: renesas: r8a779g0: FIX PWM suffixes pinctrl: renesas: r8a779g0: Fix IRQ suffixes ...
2024-06-26pinctrl: bcm: bcm63xx: Use scope based of_node_put() cleanupsPeng Fan
Use scope based of_node_put() cleanup to simplify code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-16-26c5f2dc1181@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: add missing MODULE_DESCRIPTION() macrosJeff Johnson
When ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/bcm/pinctrl-bcm4908.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_i2c.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_spi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/meson/pinctrl-meson.o Add the missing invocation of the MODULE_DESCRIPTION() macro to all files which have a MODULE_LICENSE(). This includes many meson drivers which, although they did not produce a warning with the x86 allmodconfig configuration, may cause this warning with ARM or ARM64 configurations. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for Amlogic Pinctrl drivers Link: https://lore.kernel.org/r/20240610-md-drivers-pinctrl-v1-1-68462e3d960c@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: bcm2835: Use string_choices API instead of ternary operatorStefan Wahren
Use modern string_choices API instead of manually determining the output using ternary operator. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240603181938.76047-3-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: bcm2835: Fix permissions of persist_gpio_outputsStefan Wahren
The commit 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") unintentionally made the module parameter persist_gpio_outputs changeable at runtime. So drop the write permission in order to make the freeing behavior predictable for user applications. Fixes: 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Closes: https://lore.kernel.org/linux-gpio/Zjk-C0nLmlynqLAE@surfacebook.localdomain/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240603181938.76047-2-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-06pinctrl: bcm2835: Make pin freeing behavior configurableStefan Wahren
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN. So in case it was configured as GPIO_OUT before the configured output level also get lost. As long as GPIO sysfs was used this wasn't actually a problem because the pins and their possible output level were kept by sysfs. Since more and more Raspberry Pi users start using libgpiod they are confused about this behavior. So make the pin freeing behavior of GPIO_OUT configurable via module parameter. In case pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is kept. This patch based on the downstream work of Phil Elwell. Link: https://github.com/raspberrypi/linux/pull/6117 Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Message-ID: <20240503062745.11298-1-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-28pinctrl: bcm2835: Implement bcm2711_pinconf_getStefan Wahren
The BCM2711 allows to read the bias config. So implement pin_conf_get accordingly. The pull resistor values has been taken from the BCM2711/7211 datasheet. This implementation assumes that BCM7211 behaves the same way. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Message-ID: <20240307070113.4888-3-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-28pinctrl: bcm2835: Implement bcm2835_pinconf_getStefan Wahren
Even the driver already has implemented pin_dbg_show, it could be helpful to implement pin_conf_get for a more generic behavior. Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read the bias config, so the implementation is limited to the basics. Keep ENOTSUPP here, because it's only used internally. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Message-ID: <20240307070113.4888-2-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-12pinctrl: bcm: Convert to use grp memberAndy Shevchenko
Convert drivers to use grp member embedded in struct group_desc, because other members will be removed to avoid duplication and desynchronisation of the generic pin group description. Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231211190321.307330-6-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04treewide: rename pinctrl_gpio_free_new()Bartosz Golaszewski
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04treewide: rename pinctrl_gpio_request_new()Bartosz Golaszewski
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04pinctrl: bcm: use new pinctrl GPIO helpersBartosz Golaszewski
Replace the pinctrl helpers taking the global GPIO number as argument with the improved variants that instead take a pointer to the GPIO chip and the controller-relative offset. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-30pinctrl: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-10pinctrl: nsp-gpio: Silence probe deferral messagesFlorian Fainelli
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us produce the "unable to add GPIO chip" message which is confusing. Use dev_err_probe() to silence probe deferral messages. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-10pinctrl: iproc-gpio: Silence probe deferral messagesFlorian Fainelli
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us produce the "unable to add GPIO chip" message which is confusing. Use dev_err_probe() to silence probe deferral messages. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230808180733.2081353-2-florian.fainelli@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-20pinctrl: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-08pinctrl: bcm2835: Handle gpiochip_add_pin_range() errorsChristophe JAILLET
gpiochip_add_pin_range() can fail, so better return its error code than a hard coded '0'. Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/98c3b5890bb72415145c9fe4e1d974711edae376.1681681402.git.christophe.jaillet@wanadoo.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-29 09:19:33 +0000