| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add i2c0, i2c1, pwm0, uart1, ssp2 pin groups & functions in tgllp_soc_data
for device id INTC1055. The pinctrl-upboard driver set the correct pin
function corresponding to these data.
Signed-off-by: Gary Wang <is0124@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v7.2-1
* Tidy up the PWM base computation to avoid false positive *SAN warnings
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous unit.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Compute base inside intel_pinctrl_probe_pwm() only after the
PINCTRL_FEATURE_PWM and CONFIG_PWM_LPSS checks have passed. Tidy
up; no functional change.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/linux-gpio/aglu5jy5SbW9Wjwj@ashevche-desk.local/
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Starting from revision 1.1 of the Chassis specification the PAD_OWN
is represented by 3 bits instead of 2 bits in the previous revisions.
Update the driver to support this feature.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The 1kOhm pull down and hardware debouncer are features of the revision 0.92
of the Chassis specification. Fix that in the code accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The register space of a certain capability starts at the offset just after
the respective node in the capability list. It means that there are no fixed
offsets for them from SoC to SoC generation and they have to be calculated
at run-time. Improve capability support by adding the respective calculation
algorithm and in the result enable PWM on more platforms that currently may
use the wrong register.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The Copyright note must follow the
Copyright (C) <year(s)> Intel Corporation
template, where (C) is always capitalised and <year(s)> either
a single year or a range. Update the Intel pin control drivers
to follow.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
There is no clear sign why we have tng_pinctrl_probe() in the first
place when it has already been using managed calls. Join the function
into its devm_tng_pinctrl_probe() wrapper.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Intel pinctrl drivers support large set of platforms and the IPs are
often reused by their different variants, but it's currently not possible
to figure out the exact driver that supports specific variant. Add user
friendly documentation for them.
Cc: stable@vger.kernel.org
Reported-by: Guido Trentalancia <guido@trentalancia.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220056
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guido Trentalancia <guido@trentalancia.com>
[andy: added Oxford comma]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Intel Nova Lake is supported by the generic platform driver,
so add it to the list of supported in Kconfig.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Driver is ready to use intel_gpio_add_pin_ranges() directly instead of
custom approach. Convert it now.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Driver is ready to use intel_gpio_add_pin_ranges() directly instead of
custom approach. Convert it now.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Driver is ready to use intel_gpio_add_pin_ranges() directly instead of
custom approach. Convert it now.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Export intel_gpio_add_pin_ranges() for reuse in other drivers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
A new macro will be used for the further refactoring of the drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
pinctrl-intel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for the driver code.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We already have ACPI dependency for Intel pinctrl menu. No need to
repeat it.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
