| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
|
|
Commit ebf1d03dab96 ("iio: inkern: Use namespaced exports") in the iio
tree restricts certain exported core functions that a driver added in
commit c3dce117333c ("thermal/drivers/qcom: Add support for Qualcomm MBG
thermal monitoring") from the thermal tree uses, causing modpost to
warn (or error without CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS):
ERROR: modpost: drivers/thermal/qcom/qcom-spmi-mbg-tm.ko: module uses symbol 'devm_iio_channel_get' from namespace 'IIO_CONSUMER', but does not import it.
ERROR: modpost: drivers/thermal/qcom/qcom-spmi-mbg-tm.ko: module uses symbol 'iio_read_channel_processed' from namespace 'IIO_CONSUMER', but does not import it.
Add the IIO_CONSUMER namespace import to clear up the error.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260812-qcom-spmi-mbg-tm-ns-modpost-error-v1-1-d849390d2714@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 34f54003643e ("thermal/core: Allocate the thermal
class dynamically") that went against driver core changes aiming at the
elimination of class_create() [1].
No intentional functional impact.
Link: https://lore.kernel.org/linux-pm/2026082411-flask-rewire-434f@gregkh/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/4761117.LvFx2qVVIh@rafael.j.wysocki
|
|
This reverts commit 499274d078d0 ("thermal/core: Use the thermal class
pointer as init guard") because it depends on another commit that needs
to be reverted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/6301222.lOV4Wx5bFT@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Get rid of static_cpu_has() - one less API to care about testing CPU
features
- Unify the handling of CPU core types (performance, efficient, etc) by
mapping the vendor-specific types to Linux ones
- Continuation of the work of Ahmed Darwish to centralize CPUID leaf
representation
* tag 'x86_cpu_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU: Rename struct cpuid_read_output to struct cpuid_output
x86/cpu/scattered: Sort it properly
x86/cpu: Use parsed CPUID(0x1)
x86/lib: Add CPUID(0x1) family and model calculation
x86/cpu: Use parsed CPUID(0x0)
x86/cpu/transmeta: Rescan CPUID(0x1) after modifying capabilities
x86/topology: Add TOPO_CPU_TYPE_LOW_POWER
x86/topology: Name the AMD core-type values
x86/topo: Map vendor CPU types to generic Linux such types
x86/bugs: Don't use cpu-type matching in cpu_vuln_blacklist
x86/cpu: Hide and rename static_cpu_has()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MSR updates from Ingo Molnar:
- Streamline the x86 MSR handling APIs along the 64-bit variants,
simplifying the interfaces.
Removal of the old APIs is planned for the next cycle, to reduce
churn & integration pain (Juergen Gross)
* tag 'x86-msr-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mce: Work around build warning after MSR-interface switch
cpufreq: Stop using 32-bit MSR interfaces
x86/featctl: Stop using 32-bit MSR interfaces
KVM/x86: Stop using 32-bit MSR interfaces
x86/mtrr: Stop using 32-bit MSR interfaces
acpi: Stop using 32-bit MSR interfaces
powercap: Stop using 32-bit MSR interfaces
thermal/intel: Stop using 32-bit MSR interfaces
x86/olpc: Stop using 32-bit MSR interfaces
x86/hyperv: Stop using 32-bit MSR interfaces
hwmon: Stop using 32-bit MSR interfaces
EDAC: Stop using 32-bit MSR interfaces
x86/cpu: Stop using 32-bit MSR interfaces
x86/apic: Stop using 32-bit MSR interfaces
x86/resctrl: Stop using 32-bit MSR interfaces
x86/tsc: Stop using 32-bit MSR interfaces
x86/amd: Stop using 32-bit MSR interfaces
x86/pci: Stop using 32-bit MSR interfaces
x86/hygon: Stop using 32-bit MSR interfaces
x86/mce: Stop using 32-bit MSR interfaces
...
|
|
Add the missing include leading to the error:
error: implicit declaration of function ‘FIELD_GET’ [-Werror=implicit-function-declaration]
184 | if (FIELD_GET(MON_FAULT_STATUS_MASK, val) == MON_FAULT_LVL1_UPR)
| ^~~~~~~~~
cc1: all warnings being treated as errors
Fixes: cbe31d5ce498 ("thermal/drivers/armada: Use bitfield and bitmask macros")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608082242.drjXuzsN-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260811094747.2940616-1-daniel.lezcano@kernel.org
|
|
Add missing bitfield header leading to the error:
>> drivers/thermal/qcom/qcom-spmi-mbg-tm.c:184:21: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
184 | if (FIELD_GET(MON_FAULT_STATUS_MASK, val) == MON_FAULT_LVL1_UPR)
| ^~~~~~~~~
Fixes: c3dce117333c ("thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608080800.RfxKb9uR-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260811094935.2941313-1-daniel.lezcano@kernel.org
|
|
Add missing file resulting from a manual application of the change
below after fixing a conflict in the Makefile.
Fixes: 948ee3a74f35 ("thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring")
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260811145427.3089426-1-daniel.lezcano@kernel.org
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:
"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...
|
|
'thermal-tools'
Merge updates of the thermal core, thermal drivers for Intel platforms
and the thermometer utility for 7.3-rc1:
- Use sysfs_emit_at() in trans_table_show() (Thorsten Blum)
- Remove hwmon class devices created for thermal zones when the thermal
zone devices holding them are removed (Rafael Wysocki)
- Add support for the Directed Package-level Thermal Interrupt to
the Intel thermal throttling driver to allow package-level thermal
interrupts to go to one specific CPU in a processor package instead
of going to all of the CPUs in it (Ricardo Neri)
- Clean up RFIM groups on DVFS failure and clean up ODVP on probe
failures in the int340x thermal driver (Pengpeng Hou)
- Remove redundant dev_err() from the int340x thermal driver and the
bxt_pmic driver (Pan Chuang)
- Simplify ptc_temperature_write() in the int340x thermal driver by
using kstrtou32_from_user() (Dmitry Antipov)
- Close fd on realloc() failure in the thermometer utility (Amarjeet)
* thermal-core:
thermal: sysfs: Use sysfs_emit_at() in trans_table_show()
* thermal-hwmon:
thermal: hwmon: Remove hwmon class device along with its parent
* thermal-intel:
thermal: intel: int340x: simplify ptc_temperature_write()
thermal: intel: bxt_pmic: Remove redundant dev_err()
thermal: intel: int340x: Remove redundant dev_err()
thermal: intel: int3400: clean up ODVP on probe failures
thermal: intel: int340x: clean up RFIM groups on DVFS failure
thermal: intel: Add a syscore shutdown callback for kexec reboot
thermal: intel: Add syscore callbacks for suspend and resume
thermal: intel: Enable the Directed Package-level Thermal Interrupt
thermal: intel: Add resources to handle directed package-level thermal interrupts
x86/thermal: Add bit definitions for Intel Directed Package Thermal Interrupt
* thermal-tools:
tools/thermal/thermometer: close fd on realloc() failure
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() and devm_request_threaded_irq()
automatically log detailed error messages on failure. Remove the
now-redundant driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260717024733.374913-1-panchuang@vivo.com
|
|
k1_tsensor_set_trips() checks the requested trip temperatures before
converting them to the sensor register representation. Distinct
out-of-range temperatures can clamp to the same hardware value, leaving the
sensor with an invalid low/high threshold pair.
Validate the ordering after conversion and clamping.
Fixes: 296a977f2bac ("thermal/drivers/spacemit/k1: Add thermal sensor support")
Signed-off-by: surendra <kr494167@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260720103606.93924-1-kr494167@gmail.com
|
|
qoriq_tmu_resume() enables the TMU clock before clearing the
power-down bit and enabling monitoring.
If either register update fails, the function returns with the clock
still enabled. This leaves the clock enable count unbalanced after a
failed resume.
Disable the clock on those failure paths before returning the error.
Fixes: 51904045d4aa ("thermal: qoriq: Add clock operations")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260722075625.452684-1-pengcan@kylinos.cn
|
|
Depending on the SoC+Firmware combination, the LVTS hardware may be
may be actively used by one or even multiple concurrent MCUs!
In this case, resetting it may produce either a severe slowdown of
the entire system, or even a thermal protection AP reset, as some
MCU(s) may be reading a very high or very low temperature while the
LVTS is being reset.
On those, don't fail if no reset is found as that may be omitted on
purpose, but still check if there's one, because some board(s) may
be running on a different bootchain with reduced firmwares or using
firmwares with reduced functionality.
So, use devm_reset_control_get_optional_exclusive() instead, as the
LVTS controller always had only one reset and retrieving that by
index, specifically, always made little sense anyway.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260721105230.101906-3-angelogioacchino.delregno@collabora.com
|
|
Add support for ADC_TM part of PMIC5 Gen3 in an auxiliary driver
under the Gen3 ADC driver. Its functionality is similar to that of
PMIC5 Gen2 ADC_TM, which implements the threshold setting and
interrupt generating functions, used to support thermal trip points.
In Gen3 ADC, the register interface is implemented on one or more SDAM
(Shared Direct Access Memory) peripherals instead of dedicated ADC
peripherals. Each ADC SDAM has eight channels which can be configured
for either immediate reads (main ADC driver's functionality) or ADC_TM
reads. By convention, the first channel of the first ADC SDAM is reserved
for all immediate reads and remaining channels across all SDAMs are used
for ADC_TM functionality.
On the first SDAM, the interrupt line and configuration registers are
shared between the main ADC and auxiliary ADC_TM drivers. Access to the
registers is protected through a mutex shared between the drivers. The
ADC_TM driver accesses this mutex and some other functions shared from
the main driver (like adc5_gen3_get_scaled_reading() for immediate channel
reads in the .get_temp() callback) through APIs exported into a shared
namespace.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260722-gen3_adc_tm-v4-3-011981f756c8@oss.qualcomm.com
|
|
Fix trivial typo, s@enabled@enable@. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260804213738.287818-1-marek.vasut+renesas@mailbox.org
|
|
Add a devm action to clean hardware interrupts, sampling, and control
registers on driver unbind, mirroring what k1_tsensor_init() sets up.
Reorder the registration order within probe(): register the thermal
zones first, then request the IRQ, and register the shutdown action
last. On removal, the hardware interrupt is disabled first, then the
IRQ is released, and finally the thermal zones are released. This
avoids the IRQ thread accessing an already unregistered thermal zone
during devres cleanup.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/1967d2bcc8fede6fbd25fc8eee07f2873fb41472.1784184867.git.xiaopei01@kylinos.cn
|
|
Add a driver for the Qualcomm MBG (Master Bandgap) thermal monitoring
device. It monitors PMIC die temperature in hardware and raises an
interrupt when a programmed threshold is crossed.
MBG hardware supports two upper-threshold levels. Currently, only the
level-1 threshold is supported by the driver.
Temperature is read from the associated ADC channel, and when a level-1
upper-threshold violation occurs, the hardware generates an interrupt
over SPMI. The driver notifies the thermal framework accordingly.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Co-developed-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Sachin Gupta <sachin.gupta@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-spmi-mbg-driver-v3-2-ef73064f2789@oss.qualcomm.com
|
|
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label.
Link: https://lore.kernel.org/linux-pm/20260402021828.16556-1-liujia6264@gmail.com/
Fixes: f6b6b52ef7a5 ("thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5094738.GXAFRqVoOG@rafael.j.wysocki
|
|
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it.
Link: https://lore.kernel.org/linux-hwmon/20260803183915.4ED7D1F000E9@smtp.kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5123895.31r3eYUQgx@rafael.j.wysocki
|
|
Revert commit d6323469bcfb ("thermal: hwmon: Register a hwmon device
for each thermal zone") that changed the names of hwmon class devices
associated with thermal zones and their sysfs layout which made user
space unhappy.
Closes: https://lore.kernel.org/linux-pm/cafd8af9-c6e9-4bf2-b496-23e796fbc9a6@linux.dev/
Closes: https://lore.kernel.org/linux-hwmon/ab8b093b-46e6-4738-afcf-4b97c9ad5af9@googlemail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2301040.irdbgypaU6@rafael.j.wysocki
|
|
Revert commit cfb5dc0f60fb ("thermal: hwmon: Use extra_groups for adding
temperature attributes") because it is depended on by another one that
turned out to be problematic.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1992232.tdWV9SEqCh@rafael.j.wysocki
|
|
Move the DBx500 PRCMU definitions into the DB8500 PRCMU
header and delete the wrapper header.
Convert users of simple PRCMU wrappers to call the DB8500 helpers
directly.
The dbx500-prcmu.h header was the result of an earlier attempt to
abstract several DBx5x SoC PRCMU units to use the same abstract
header. They are deleted from the kernel and this is not just
causing maintenance burden and build errors.
The stub code is using -ENOSYS in a way checkpatch complains about
so replace these with -EINVAL while we're at it.
Assisted-by: Codex:gpt-5-5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Link: https://patch.msgid.link/20260619-mfd-prcmu-merge-headers-v1-1-8ea0ee23b4d6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
imx_thermal_runtime_resume() enables the thermal clock before
powering up the sensor and enabling measurements.
If either regmap_write() fails, the function returns with the clock
still enabled. This leaves the clock enable count unbalanced after a
failed runtime resume.
Disable the clock on those failure paths before returning the error.
Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260722084909.463437-1-pengcan@kylinos.cn
|
|
Commit bb21ee31f575 ("iio: Fix iio_multiply_value use in
iio_read_channel_processed_scale") fixed the
iio_read_channel_processed_scale to return 0 on success instead
of IIO_VAL_INT (1). The existing check in adc_tm5_get_temp()
treated a successful return as an error because it expected
IIO_VAL_INT. Drop the redundant `ret != IIO_VAL_INT` condition
and rely solely on the negative error check.
Fixes: bb21ee31f575 ("iio: Fix iio_multiply_value use in iio_read_channel_processed_scale")
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724-adc-tm5-drop-iio-val-int-check-v1-1-0b85a0895dd7@oss.qualcomm.com
|
|
Add support for Airoha AN7583 Thermal driver. This apply similar logic
on how to read the temperature but totally drop support for the
PTP_THERMAL subsystem. PTP_THERMAL subsystem was a way to trigger trip
point from hardware by configuring how to read the temperature
internally.
This subsystem has been totally removed from Airoha AN7583 permitting
only to read the temperature.
The SoC support up to 3 sensor but the original driver always read the
BGA sensor hence it's currently implemented reading only this specific
sensor. Reference and values for the other 2 sensor are defined for
further implementation if confirmed working.
set_thermal_mux() is extended to also address muxing the sensor as
AN7583 use a different way to read the temperature from 3 different
diode. The EN7581 code is updated to account for these changes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-8-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, generalize
get_thermal_ADC() and set_thermal_mux() with the use of reg_field API.
This is to take into account the same logic between the current
supported SoC and the new one but with different register address.
While at it also further improve some comments and move sleep inside the
set_thermal_mux function.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-6-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, generalize the probe
function to address for the 2 SoC difference.
Implement a match_data struct where it's possible to define a more
specific probe and post_probe function and specific thermal ops and
pllrg protect value.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-5-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, convert the driver to
regmap API. This is needed as Airoha AN7583 will be based on syscon
regmap.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-4-ansuelsmth@gmail.com
|
|
In airoha_thermal_setup_monitor there is a copy paste error on configuring
the internval for temp monitor. Fix the error and use the correct mask for
the sen interval for the EN7581_TEMPMONCTL2 register.
Fixes: 42de37f40e1b ("thermal/drivers: Add support for Airoha EN7581 thermal sensor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/20260702094846.17325-3-ansuelsmth@gmail.com
|
|
In airoha_thermal_set_trips, there is a copy paste error on clamping the
value for the low trip temp point. Fix it to the correct value and actually
clamp for the low variable.
Fixes: 42de37f40e1b ("thermal/drivers: Add support for Airoha EN7581 thermal sensor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/20260702094846.17325-2-ansuelsmth@gmail.com
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260705164311.2273-2-wsa+renesas@sang-engineering.com
|
|
Replace snprintf() with sysfs_emit_at() in trans_table_show().
sysfs_emit_at() is preferred for formatting sysfs output because it
provides safer bounds checking.
Convert multiple PAGE_SIZE length checks to check the number of bytes
actually copied by sysfs_emit_at(), thus avoiding manual buffer size
accounting.
Consistently return -EFBIG when the transition table output exceeds the
sysfs buffer, including the header row.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260719132251.31936-3-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Simplify 'ptc_temperature_write()' by using the convenient
'kstrtou32_from_user()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20260702160240.2929965-1-dmantipov@yandex.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The devm_request_threaded_irq() now automatically logs detailed error
messages on failure. This eliminates the need for driver-specific
dev_err() calls that previously printed generic messages.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260709023048.599150-12-panchuang@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The devm_request_threaded_irq() now automatically logs detailed error
messages on failure. This eliminates the need for driver-specific
dev_err() calls that previously printed generic messages.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260709023048.599150-11-panchuang@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues.
Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260623015140.19300-1-pengpeng@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
proc_thermal_rfim_add() can create the FIVR and DLVR sysfs groups
before creating the DVFS group.
If DVFS group creation fails while both earlier groups are enabled, the
current error handling removes only one group: the FIVR branch returns
before the DLVR cleanup branch can run. This leaves the DLVR group
behind even though RFIM setup fails.
Use one DVFS failure path that removes all previously created RFIM
groups before returning the error.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260615065245.84252-1-pengpeng@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The 32-bit MSR interfaces rdmsr(), wrmsr(), rdmsr_safe() and
wrmsr_safe() are planned to be removed. Use the related 64-bit variants
instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260703112232.1762925-1-jgross@suse.com
|
|
A kexec reboot may load a kernel that does not support directed package-
level thermal interrupts. Without a shutdown callback, the directed
interrupt configuration remains enabled across kexec but will not be
handled correctly. In particular, if the CPU designated to receive the
directed interrupt goes offline, no other CPU in the package will receive
it.
Add a syscore shutdown callback to disable directed package-level thermal
interrupts on all packages before a kexec reboot. If the post-kexec kernel
does not enable directed interrupts, it falls back to broadcasting the
interrupt to all CPUs.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-6-3a26d1e47fc8@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Directed package-level thermal interrupts are serviced by a single CPU per
package. These handler CPUs are selected at boot through the CPU hotplug
infrastructure. This mechanism is sufficient to restore the directed
interrupt configuration when resuming from suspend for non-boot packages.
It also keeps the handler-tracking array updated.
For the boot package, CPU0 is chosen during boot because its CPU hotplug
online callback runs first. However, this callback is not invoked on
resume. The directed package-level interrupt configuration for the boot
package is not restored. Add a syscore resume callback to re-enable
directed package-level interrupts for this package.
Disabling directed interrupts during suspend is required to keep the
handler-tracking array in a consistent state for the boot package,
allowing the correct configuration to be restored on resume.
The resume callback must busy-wait for hardware acknowledgment of the
directed interrupt setup. Otherwise, the handler-tracking array could be
left in an inconsistent state. This implies running with interrupts
disabled for up to 15ms, though in practice it takes less than 1ms.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-5-3a26d1e47fc8@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Package-level thermal interrupts are broadcast to all online CPUs within a
package, even though only one CPU needs to service them. This results in
unnecessary wakeups, lock contention, and corresponding performance and
power-efficiency penalties.
When supported by hardware, a CPU requests to receive directed package-
level thermal interrupts by setting a designated bit in
IA32_THERM_INTERRUPT. The operating system must then verify that hardware
has acknowledged this request by checking a designated bit in
IA32_PACKAGE_THERM_STATUS.
Enable directed package-level thermal interrupts on one CPU per package
using the CPU hotplug infrastructure. The first CPU of a package that
comes online will handle the interrupt. If the handling CPU goes offline,
select a new CPU. Temporarily enable directed interrupts on both the
current and new CPU until hardware acknowledges the new selection, then
disable them on the outgoing CPU.
Systems without directed-interrupt support continue to broadcast the
package-level interrupt to all CPUs.
Also, add a rollback mechanism in the CPU hotplug online callback to
fall back to broadcast mode if the directed-interrupt acknowledgment fails
in any package. This is most important during boot, when all CPUs in a
package come online and would otherwise keep retrying on faulty hardware.
A complete rollback is not needed in the CPU hotplug offline callback since
at that point the hardware is known to work.
While here, update an inline comment to point to the correct volume of the
Intel Software Developer's Manual.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-4-3a26d1e47fc8@linux.intel.com
[ rjw: Rebased on top of 7.2-rc2 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
interrupts
When supported by hardware, a CPU requests to receive directed package-
level thermal interrupts by setting a designated bit in
IA32_THERM_INTERRUPT. It is sufficient to have one CPU per package handling
the interrupt.
Add an array to keep track of those CPUs as well as init and cleanup
functions. A subsequent changeset will designate a CPU per package to
handle the interrupt.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-3-3a26d1e47fc8@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace manual bitfield manipulations with FIELD_MODIFY() and define
constants with BIT() and GENMASK() to make code more readable.
Also, remove offset and shift constants for clarity in use of bitfield
macros.
Signed-off-by: Bryan B. Lima <bblima@usp.br>
Co-developed-by: Gustavo S. Correa <gustavoscorrea@usp.br>
Signed-off-by: Gustavo S. Correa <gustavoscorrea@usp.br>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260701010802.99029-1-bblima@usp.br
|
|
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as well.
The original code used a three step process to cleanup:
1. Call thermal_zone_device_unregister() to cleanup.
2. Set priv->zone to an error pointer to preserve the error code.
3. Set priv->zone to NULL to avoid a second call to
thermal_zone_device_unregister() in the rcar_thermal_remove()
function.
Now we can just do a direct goto error_unregister and rcar_thermal_remove()
handles the cleanup properly.
Fixes: bbcf90c0646a ("thermal: Explicitly enable non-changing thermal zone devices")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/aj5WnseULiwgmlWv@stanley.mountain
|
|
cpu_feature_enabled() is the one to use to test feature flags so hide
the static thing which doesn't pay attention to disabled mask bits
anyway.
Use the following command to do the replacement:
$ git grep --files-with-matches -w static_cpu_has -- ':(exclude)*cpufeature.h' \
| xargs sed -i 's/static_cpu_has(/cpu_feature_enabled\(/g'
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://patch.msgid.link/20260620015041.336288-1-bp@kernel.org
|
|
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
|
