| Age | Commit message (Collapse) | Author |
|---|
|
A flexible array member can be used to combine allocations and simplify
handling slightly.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260425014201.439251-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When there's nothing going through the retimer, there's no reason to
keep it online. Put it in reset when possible to save power.
Also, remove the register cache-compare optimization as it makes little
sense now that the chip resets during almost all transitions and
tracking the validity of that cache becomes a headache.
Suggested-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://patch.msgid.link/20260420-topic-ps883x_unused_reset-v1-1-7aabf7004d2a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.
Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.
Fixes: fa0ea13e9f1c ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port in debug accessory mode can be either a source or sink. The
previous tcpm_port_is_debug() function only checked for source port.
Commit 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into
accessory mode debug") changed the detection logic to support both roles,
but left some logic in _tcpm_cc_change() unchanged, This causes the state
machine to transition to an incorrect state when operating as a sink in
debug accessory mode. Log as below:
[ 978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS]
[ 978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected]
[ 978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state.
To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink()
helper to explicitly identify the power mode in debug accessory mode.
Update the state transition logic in _tcpm_cc_change() to ensure the state
machine transitions comply with Type-C specification. Also update the logic
in run_state_machine() to keep consistency.
Fixes: 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reset internal port states (such as vdm_sm_running and
explicit_contract) on soft reset AMS as the port needs to negotiate a
new contract. The consequence of leaving the states in as-is cond are as
follows:
* port is in SRC power role and an explicit contract is negotiated
with the port partner (in sink role)
* port partner sends a Soft Reset AMS while VDM State Machine is
running
* port accepts the Soft Reset request and the port advertises src caps
* port partner sends a Request message but since the explicit_contract
and vdm_sm_running are true from previous negotiation, the port ends
up sending Soft Reset instead of Accept msg.
Stub Log:
[ 203.653942] AMS DISCOVER_IDENTITY start
[ 203.653947] PD TX, header: 0x176f
[ 203.655901] PD TX complete, status: 0
[ 203.657470] PD RX, header: 0x124f [1]
[ 203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[ 203.657482] AMS DISCOVER_IDENTITY finished
[ 203.657484] cc:=4
[ 204.155698] PD RX, header: 0x144f [1]
[ 204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[ 204.155741] PD TX, header: 0x196f
[ 204.157622] PD TX complete, status: 0
[ 204.160060] PD RX, header: 0x4d [1]
[ 204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[ 204.160076] PD TX, header: 0x163
[ 204.162486] PD TX complete, status: 0
[ 204.162832] AMS SOFT_RESET_AMS finished
[ 204.162840] cc:=4
[ 204.162891] AMS POWER_NEGOTIATION start
[ 204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[ 204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 204.162913] PD TX, header: 0x1361
[ 204.165529] PD TX complete, status: 0
[ 204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[ 204.166996] PD RX, header: 0x1242 [1]
[ 204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[ 204.167019] AMS POWER_NEGOTIATION finished
[ 204.167020] cc:=4
[ 204.167083] AMS SOFT_RESET_AMS start
[ 204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[ 204.167092] PD TX, header: 0x16d
[ 204.168824] PD TX complete, status: 0
[ 204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[ 204.171876] PD RX, header: 0x43 [1]
[ 204.171879] AMS SOFT_RESET_AMS finished
This causes COMMON.PROC.PD.11.2 check failure for
TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation.
Fixes: 01af542392b5 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 65111084c63d7 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:
- It breaks DMA on 15xx boards - transfers just silently stall.
- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.
It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb998a ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").
So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).
Fixes: 65111084c63d ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expose Cadence USBSSP through the same platform path as USBSS, trim
Kconfig and Makefile: one core loadable object plus separate glue .ko
files.
Single cdns.ko bundles core, DRD, the generic "cdns,usb3" platform
driver in cdns3-plat.c, optional host.o, and optional gadget objects.
Use CONFIG_USB_CDNS3_GADGET as a bool to compile gadget support into
that module. Remove duplicate MODULE_* declarations from cdns3-plat.c
now that it links into the same module.
Kconfig: the generic platform driver is selected via CONFIG_USB_CDNS3.
Move CONFIG_USB_CDNSP_PCI beside CONFIG_USB_CDNS3_PCI_WRAP under
"Platform glue driver support". SoC glue entries (TI, i.MX, StarFive)
depend only on CONFIG_USB_CDNS3.
Tighten CONFIG_USB_CDNS_SUPPORT dependencies so the umbrella follows
host or gadget when either is built as a module. Match host and gadget
bools to the cdns.ko tristate with USB=USB_CDNS3 and USB_GADGET=USB_CDNS3
instead of comparing against USB_CDNS_SUPPORT.
Link host.o when CONFIG_USB_CDNS3_HOST is enabled and use that symbol in
host-export.h, removing the redundant CONFIG_USB_CDNS_HOST indirection.
Export cdns_core_init_role and reorganize the function cdns_init, and
controller version could be gotten before the gadget init function is
decided per controller.
Keep host_init / gadget_init callbacks in struct cdns, so core.c does
not need direct linkage to host or gadget objects. Refactor cdnsp-pci.c
into a thin PCI-to-platform wrapper.
drivers/usb/Makefile: descend into drivers/usb/cdns3/ only when
CONFIG_USB_CDNS_SUPPORT is enabled.
Assisted-by: Cursor:claude-4.6-opus
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260421023459.506145-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device controller may update vbus status via usb_udc_vbus_handler(),
which tries to connect the gadget even though gadget_bind_driver() has
already called usb_udc_connect_control_locked(). This causes pullup() to
be called twice. Avoid this by checking if gadget->connected is true.
This also set gadget->connected as false in usb_gadget_activate() if it
became connected while it was being deactivated. Otherwise,
usb_gadget_connect_locked will return early and pullup() won't be called.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260423095355.2673035-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Cadence CDNSP controller optionally supports eUSB2 (embedded USB2)
port. While this port type operates logically like high-speed USB 2.0,
it utilizes a different physical layer signaling.
This patch:
- Extends the port detection logic to recognize the eUSB2 protocol.
- Tracks the eUSB2 port offset in the cdnsp_device structure.
- Ensures that eUSB2 ports are correctly handled during Link State
transitions, specifically forcing L0 when LPM is capable, similar
to standard USB 2.0 ports.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260420-eusb2v2_upstream-v2-1-9883645e2ede@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the GL3590 4 ports USB3.2 hub.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Link: https://patch.msgid.link/20260403100435.3477729-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "of_node_reused" over to the "flags"
field so modifications are safe.
Cc: Johan Hovold <johan@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # PCI_PWRCTRL
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260406162231.v5.8.I806b8636cd3724f6cd1f5e199318ab8694472d90@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
|
|
JHB100 contains 2 dwc3 USB controllers and PHYs and working
as USB 2.0 speed. It can working in generic platform and
setting default properties.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://patch.msgid.link/20260410112500.90432-3-minda.chen@starfivetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix typo in comment where 'seperate' should be 'separate'.
Signed-off-by: Qinghua Zhao <zqh1630@126.com>
Link: https://patch.msgid.link/20260409145428.18130-1-zqh1630@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.1-rc1
Here are the USB serial updates for 7.1-rc1, including:
- use strscpy() instead of strcpy()
- new modem device id
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: iuu_phoenix: fix iuutool author name
USB: serial: option: add Telit Cinterion FN990A MBIM composition
USB: serial: ti_usb_3410_5052: use strscpy() instead of strcpy()
|
|
The original iuutool author is Juan Carlos Borrás - fix the spelling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM.
Fixes: 2b74b0a04d3e ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040753-baffle-handheld-624d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d9d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path").
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040705-fruit-unloved-0701@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently in cdev_alloc() error path no error code is assigned.
Assign error code '-ENOMEM'.
Detected by Smatch:
drivers/usb/gadget/function/f_hid.c:1291 hidg_bind()
warn: missing error code 'status'
Fixes: 81ebd43cc0d6d ("usb: gadget: f_hid: don't call cdev_init while cdev in use")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Link: https://patch.msgid.link/20260402180008.64233-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for cros_ec_ucsi to load based on "google,cros-ec-ucsi"
compatible devices and "GOOG0021" ACPI nodes.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://patch.msgid.link/20260403223357.1896403-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260407013122.1296818-1-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early.
Fixes: 1325f85fa49f ("staging: usbip: bugfix add number of packets for isochronous frames")
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Link: https://patch.msgid.link/20260402085259.234-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040647-sincerity-untidy-b104@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reverse the check of the size of the usb_ssp_isoc_ep_comp_descriptor
structure to be done before accessing the structure itself.
Functionally, this doesn't really do anything as the buffer is all
internal to the kernel, and reading off the end is just fine, but static
checking tools get picky when noticing that a potential read could be
made "outside" of an allocated buffer.
Not a bugfix, but a cleanup to keep tools from tripping over this
constantly and annoying me with their pointless reports.
Link: https://patch.msgid.link/2026040630-graded-postwar-760f@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the partner usb_mode is only set in ucsi_register_partner().
If the partner enters USB4 operation after it is registered, this is not
reported to the typec class. The UCSI spec states that the Connector
Partner Changed bit can represent a Connector Partner Flags change. When
handling a UCSI partner change, check the partner flags for USB4
operation.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260402182438.867396-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Lenovo Yoga Book 9 14IAH10 (83KJ) has a composite USB device
(17EF:6161) that controls both touchscreens via a CDC ACM interface.
Interface 0 is a standard CDC ACM control interface, but interface 1
(the data interface) incorrectly declares vendor-specific class (0xFF)
instead of USB_CLASS_CDC_DATA. cdc-acm rejects the device at probe with
-EINVAL, leaving interface 0 unbound and EP 0x82 never polled.
With no consumer polling EP 0x82, the firmware's watchdog fires every
~20 seconds and resets the USB bus, producing a continuous disconnect/
reconnect loop that prevents the touchscreens from ever initialising.
Add two new quirk flags:
VENDOR_CLASS_DATA_IFACE: Bypasses the bInterfaceClass check in
acm_probe() that would otherwise reject the vendor-class data
interface with -EINVAL.
ALWAYS_POLL_CTRL: Submits the notification URB at probe() rather than
waiting for a TTY open. This keeps EP 0x82 polled at all times,
permanently suppressing the firmware watchdog. The URB is resubmitted
after port_shutdown() and on system resume. SET_CONTROL_LINE_STATE
(DTR|RTS) is sent at probe and after port_shutdown() to complete
firmware handshake.
Note: the firmware performs exactly 4 USB connect/disconnect cycles
(~19 s each) on every cold boot before stabilising. This is a fixed
firmware property; touch is available ~75-80 s after power-on.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Cc: stable <stable@kernel.org>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260402182950.389016-1-carvsdriver@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expands range of matched bcdDevice values for the VL817 quirk entry.
This is based on experience with Axagon EE35-GTR rev1 3.5" HDD
enclosure, which reports its bcdDevice as 0x0843, but presumably other
vendors using this IC in their products may set it to any other value.
Signed-off-by: Daniel Brát <danek.brat@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260402172433.5227-1-danek.brat@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb role switch will update ID and VBUS states at the same time, and
vbus will not drop when execute data role swap in Type-C usecase. So lets
not wait vbus drop in usb role switch case too.
Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way")
Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For USB role switch-triggered IRQ, ID and VBUS change come together, for
example when switching from host to device mode. ID indicate a role switch
and VBUS is required to determine whether the device controller can start
operating. Currently, ci_irq_handler() handles only a single event per
invocation. This can cause an issue where switching to device mode results
in the device controller not working at all. Allowing ci_irq_handler() to
handle both ID and VBUS change in one call resolves this issue.
Meanwhile, this change also affects the VBUS event handling logic.
Previously, if an ID event indicated host mode the VBUS IRQ will be
ignored as the device disable BSE when stop() is called. With the new
behavior, if ID and VBUS IRQ occur together and the target mode is host,
the VBUS event is queued and ci_handle_vbus_change() will call
usb_gadget_vbus_connect(), after which USBMODE is switched to device mode,
causing host mode to stop working. To prevent this, an additional check is
added to skip handling VBUS event when current role is not device mode.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code is redundant, refactor the code, no function change.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Notifications can arrive before ucsi_init() has populated
ucsi->cap.num_connectors via GET_CAPABILITY. At that point
num_connectors is still 0, causing all valid connector numbers to be
incorrectly rejected as bogus.
Skip the bounds check when num_connectors is 0 (not yet initialized).
Pre-init notifications are already handled safely by the early-event
guard in ucsi_connector_change().
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: d2d8c17ac01a ("usb: typec: ucsi: validate connector number in ucsi_notify_common()")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407063958.863-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the following Telit Cinterion FN990A MBIM composition:
0x1074: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (diag) +
DPL (Data Packet Logging) + adb
T: Bus=01 Lev=01 Prnt=04 Port=06 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1074 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FN990
S: SerialNumber=70628d0c
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We need the USB fixes in here to build on and for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 6076388ca1eda808b95f9479f3b04839d348a2f7.
There were some build issues as reported by Arnd, so revert this for
now.
Cc: Peter Chen <peter.chen@cixtech.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/ac+LEWMCQpLSnfoD@nchen-desktop
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 7b7f2dd913829e06705035dfc41ca25fa6ec68d3.
There was some problems with an earlier cdns3 change, so this one needs
to be backed out as well.
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/ac+LEWMCQpLSnfoD@nchen-desktop
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac78 ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prefix "0x" is automatically added by '%pad'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-25-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function xhci_setup_port_arrays() limits the number of roothub ports
for both USB 2 and 3, this causes code repetition.
Solve this by moving roothub port limits validation to
xhci_create_rhub_port_array().
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-24-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resume roothubs without checking 'retval' value, as it is always '0'.
Due to changes made in commit 79989bd4ab86 ("xhci: always resume roothubs
if xHC was reset during resume") the check is redundant.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve readability of xhci_hub_report_usb3_link_state().
Comments are shortened and clarified, and the code now makes it explicit
when the Port Link State (PLS) value is modified versus when other status
bits are updated.
No functional changes.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-22-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A previous patch renamed the temporary variable holding the value read
from the PORTSC register from 'temp' to 'portsc'. This patch follows up
by updating the parameter names of all helper functions called from
xhci_hub_control() that receive a PORTSC value, as well as the functions
they call.
Function changed:
xhci_get_port_status()
L xhci_get_usb3_port_status()
L xhci_hub_report_usb3_link_state()
L xhci_del_comp_mod_timer()
xhci_get_ext_port_status()
xhci_port_state_to_neutral()
xhci_clear_port_change_bit()
xhci_port_speed()
The reason for the rename is to differentiate between port
status/change bit to be written to PORTSC and replying to hub-class
USB requests. Each of them use their specific macros.
Use "portsc" name for PORTSC values and "status" for values intended
for replying to hub-class USB request.
A dedicated structure for USB hub port status responses
('struct usb_port_status' from ch11.h) exists and will be integrated in
a later patch.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable 'temp' is used multiple times throughout xhci_hub_control()
for holding only PORTSC register values.
As a follow-up to introducing a dedicated variable for PORTPMSC, rename
all remaining 'temp' to 'portsc'. This improves readability and clarifies
what is being modified.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code handling U1/U2 timeout updates reads and modifies the PORTPMSC
register using the generic 'temp' variable, which is also used for
PORTSC. This makes the code hard to read and increases the risk of mixing
up register contents.
Introduce a dedicated 'portpmsc' variable for PORTPMSC accesses and use
it in both U1 and U2 timeout handlers. This makes the intent clearer and
keeps register operations logically separated.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
macros
The xhci driver uses two different sources for Port Link State (PLS):
1. The PLS field in the PORTSC register (bits 8:5).
2. The PLS value encoded in bits 15:8 of the USB request wIndex,
received by xhci_hub_control().
While both represent similar link states, they differ in a few details,
for example, xHCI's Resume State. Because of these differences, the xhci
driver defines its own set of PLS macros in xhci-port.h, which are intended
to be used when reading and writing PORTSC. The generic USB Chapter 11
macros in ch11.h should only be used when parsing or replying to hub-class
USB requests.
To avoid mixing these two representations and prevent incorrect state
reporting, replace all uses of Chapter 11 PLS macros with the xHCI
versions when interacting with the PORTSC register.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several hub control requests encode a descriptor type in the upper byte
of 'wValue'. Clean this up by extracting the descriptor type into a local
variable and using it for all relevant requests.
Replace magic value (0x02) with the appropriate macro (HUB_EXT_PORT_STATUS)
This improves readability and makes the handling of 'wValue' consistent.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Set Port Feature requests, the upper byte of 'wIndex' encodes
feature-specific parameters. The current code reads these upper bits in
an early pre-processing block, and then the same feature is handled again
later in the main switch statement. This results in duplicated condition
checks and makes the control flow harder to follow.
Move all feature-specific extraction of 'wIndex' upper bits into the
main SetPortFeature logic so that each feature is handled in exactly one
place. This reduces duplication, makes the handling clearer, and keeps
'wIndex' parsing local to the code that actually uses the values.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
