| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
|
|
syzbot reported a shift-out-of-bounds in __vcc_connect():
UBSAN: shift-out-of-bounds in net/atm/common.c:382:32
shift exponent -1 is negative
CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
__vcc_connect+0x14b4/0x19c0 net/atm/common.c:382
vcc_connect+0x328/0x8f0 net/atm/common.c:498
pvc_bind+0x272/0x380 net/atm/pvc.c:52
__sys_bind+0x2e3/0x410 net/socket.c:1976
__x64_sys_bind+0x7a/0x90 net/socket.c:1979
...
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci.
Fixes: c59bba75fa50 ("[PATCH] USB ATM: new usbatm core")
Reported-by: syzbot+6665d3db5fef15914802@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6665d3db5fef15914802
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/all/20260824024620.23485-1-kartikey406@gmail.com/T/ [v1]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260826133258.8306-1-kartikey406@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.
Lots of driver work for new devices and systems, and many other minor
fixes and updates. Included in here are:
- Thunderbolt subsystem driver updates and additions
- typec driver updates and additions
- usb gadget fixes all over the place, seems like people are finally
paying attention to these drivers for some reason
- xhci driver updates and fixes based on lots of reports
- usb-serial driver updates and additions
- new device ids
- other minor USB driver updates and fixes
All of these have been in linux-next for a while with no reported issues"
* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
usb: typec: hd3ss3220: fix VBUS regulator error message
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
usb: gadget: f_tcm: keep port count until LUN teardown completes
usb: usbtest: disable dynamic ID support
usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
usb: gadget: snps_udc_plat: clean up PHY on probe deferral
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
usb: gadget: midi2: remove default configfs groups on teardown
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
usb: typec: thunderbolt: Disable work before freeing tbt on remove
usb: xhci: Handle bogus TRB pointers in Missed Service Error events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind().
Reported-by: syzbot+de553c19cb054f174a35@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=de553c19cb054f174a35
Fixes: 0f9df9393855 ("usb: gadget: uvc: fix error path in uvc_function_bind()")
Fixes: 6d11ed76c45d ("usb: gadget: f_uvc: convert f_uvc to new function interface")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffin Philip <jeffinphilip14@gmail.com>
Link: https://patch.msgid.link/20260813174311.130823-1-jeffinphilip14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hd3ss3220_regulator_control() enables the VBUS regulator when @on is
true and disables it when @on is false. However, its error message uses
the opposite operation name, so an enable failure is reported as a
disable failure and vice versa.
Print the operation that was actually attempted. Reporting the opposite
regulator operation on failures can mislead debugging of VBUS problems.
Fixes: 27fbc19e52b9 ("usb: typec: hd3ss3220: Enable VBUS based on role state")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/7A42A287B2B588D0+20260812094632.348581-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped.
Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Miguel Peñaranda <mig.penaranda07@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260810121209.795089-1-mig.penaranda07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free (UAF) memory corruption.
Fix this issue by deferring the destruction of struct snd_uac_chip until
all references to the ALSA sound card are released. Register a custom
card->private_free callback (u_audio_card_free) during g_audio_setup()
that frees uac and its associated playback/capture request and ring
buffers only when the sound card reference count drops to zero.
Fixes: 6c67ed9ad9b8 ("usb: gadget: u_audio: don't let userspace block driver unbind")
Cc: stable@vger.kernel.org
Signed-off-by: Sonali Pradhan <sonalipradhan@google.com>
Link: https://patch.msgid.link/20260810071237.2207680-1-sonalipradhan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints.
Fixes: dcfe437492e2 ("usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior")
Assisted-by: Codex:deepseek-v4-flash
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/331d1d5133496d2b4184e05f8848adb06930a138.1785893865.git.xiaopei01@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260807060733.3186624-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usbtest driver relies on the driver_info field of struct usb_device_id
to point to a valid struct usbtest_info descriptor. This structure contains
essential test configurations, such as endpoint addresses and test modes,
which are required during probe.
When a user dynamically adds a new device ID via the sysfs new_id
interface without specifying a reference device, the USB core initializes
driver_info to 0 (NULL). When a matching device is subsequently probed,
usbtest_probe() unconditionally casts driver_info to a struct usbtest_info
pointer and dereferences it, leading to a NULL pointer dereference crash:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:usbtest_probe+0x3b9/0x1280 drivers/usb/misc/usbtest.c:2822
Because usbtest strictly requires pre-defined usbtest_info descriptors
to function, dynamic ID binding via sysfs is fundamentally unsupported
for this driver.
Fix this by setting .no_dynamic_id = 1 on usbtest_driver. This instructs
the USB core to skip creating the new_id and remove_id sysfs interfaces
for usbtest, preventing invalid dynamic ID entries from being created.
Cc: stable@vger.kernel.org
Reported-by: syzbot+7e1e5911f9eac50bedc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7e1e5911f9eac50bedc7
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260806152651.2370795-1-nogikh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously, tcpci_irq() always passed TCPC_TX_SOP as the receive type
to tcpm_pd_receive(), ignoring the actual frame type reported by the
TCPC_RX_BUF_FRAME_TYPE register.
Cache the TCPC_RX_DETECT register value in rx_type_mask variable. When
a PD messageis received, read TCPC_RX_BUF_FRAME_TYPE register and handle
the message only if its frame type is enabled in mask.
The TCPC_RX_BUF_FRAME_TYPE register records the received message type,
which has a 1:1 mapping to enum tcpm_transmit_type.
Fixes: fb7ff25ae433 ("usb: typec: tcpm: add discover identity support for SOP'")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260723104614.3717623-1-xu.yang_2@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data.
Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260806013502.322067-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The synchronous command completion path in ucsi_sync_control_common()
hardcodes a 5 second (5 * HZ) timeout when waiting for the PPM to signal
command completion via ACPI notification. This value matched
UCSI_TIMEOUT_MS when it was still 5000 ms, but it was not updated when
that macro was later raised to 10000 ms to fix PPM reset timeouts.
As a result, the two PPM communication paths are now inconsistent: the
polling path in ucsi_reset_ppm() respects the 10 second timeout, while
the event-driven completion path still uses 5 seconds. On machines where
the firmware is slow to respond during boot (e.g. some Lenovo ThinkPad
models such as the E14 Gen 7), commands sent after the PPM reset, such
as SET_NOTIFICATION_ENABLE and GET_CAPABILITY, can exceed 5 seconds and
cause UCSI initialization to fail with:
ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
Once UCSI init aborts, USB-C PD negotiation never completes, which in
turn blocks USB-C dock enumeration since the dock depends on a successful
PD contract.
Replace the hardcoded 5 * HZ with msecs_to_jiffies(UCSI_TIMEOUT_MS) so
that both communication paths share a single, consistent timeout value,
and future adjustments to UCSI_TIMEOUT_MS are picked up automatically.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221740
Link: https://bugzilla.kernel.org/show_bug.cgi?id=2183790
Fixes: bf4f9ae1cb08c ("usb: typec: ucsi: increase timeout for PPM reset operations")
Cc: stable@vger.kernel.org
Signed-off-by: Huang Wei <huangwei@kylinos.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Fedor Pchelkin <boddah8794@gmail.com>
Link: https://patch.msgid.link/20260805085725.389761-1-huangwei@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the referenced extcon device has not registered yet,
extcon_get_edev_by_phandle() returns -EPROBE_DEFER after the driver has
initialized and powered on the PHY. The direct return bypasses the common
cleanup path and leaves both operations unbalanced.
Store the lookup error first and route deferred probing through exit_phy,
while retaining the existing behavior of suppressing the error message for
deferral.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 1b9f35adb0ff ("usb: gadget: udc: Add Synopsys UDC Platform driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260804140510.37639-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbg_make_tpg() held dep_lock while calling
configfs_depend_item_unlocked(), which acquires the configfs root
inode lock when operating across subsystems. This creates a circular
lock dependency with configfs_rmdir():
dep_lock -> configfs root inode lock -> su_mutex -> dep_lock
In usbg_make_tpg(), dep_lock only serialized the read of opts->ready,
which is a monotonic flag that transitions from false to true exactly
once (in tcm_set_name()) and never reverts. Remove dep_lock from
usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access
opts->ready locklessly instead.
Reported-by: syzbot+c9f9d646b08f3b6032fe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c9f9d646b08f3b6032fe
Fixes: 4bb8548df632 ("usb: gadget: f_tcm: add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260731081151.285599-1-yun.zhou@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB host suspends a connected device, the DWC2 USB device controller
enters a partial power down state where controller registers are not
accessible. If the USB gadget is then disconnected or deactivated
(e.g. when a gadget function is unbound from the controller), the `pullup`
callback in struct usb_gadget_ops is invoked; if the controller is kept in
partial power down, the register write in dwc2_hsotg_core_disconnect() does
not take effect; as a result, the USB host keeps seeing the device as
connected, even though the device is disabled.
Properly exit partial power down state in the pullup callback, so that the
USB host detects a device disconnection as intended.
Fixes: 97861781daff ("usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260728154420.2021519-1-flavra@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io()
fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is
freed. However, for AIO operations, the kiocb cancel function was already
armed and kiocb->private was set to `p`.
If a concurrent cancel operation (such as sys_io_cancel()) executes after
ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free
can occur when the cancellation handler accesses the freed pointer.
To securely fix this race condition, we must properly un-arm the
cancellation. Invoking `kiocb->ki_complete()` does exactly this by
acquiring `ctx->ctx_lock` and safely removing the kiocb from the active
sequence. In doing so, it ensures that a parallel io_cancel can no longer
discover the kiocb, effectively closing the race window.
We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been
consumed and it should avoid attempting to complete the request again or
triggering subsequent completion handlers.
Fixes: de2080d41b5d ("gadget/function/f_fs.c: close leaks")
Cc: stable@vger.kernel.org
Reported-by: Xingyu Jin <xingyuj@google.com>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260724235100.106011-1-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to
sleep waiting for an event. When no setup events are pending, it calls
wait_event_interruptible_exclusive_locked_irq() with the mutex still
held. The wait macro deliberately drops the waitqueue spinlock before
sleeping but does not drop the mutex.
If a userspace daemon is polling ep0 via read() and the gadget is
asynchronously torn down via configfs (e.g., echo "" > UDC), a
deadlock can occur:
1. The configfs teardown calls functionfs_unbind(), which queues a
FUNCTIONFS_UNBIND event.
2. The daemon wakes up, consumes the event, and drops the mutex.
3. However, if the daemon loops and immediately issues another read()
before exiting, it reacquires ffs->mutex and again goes into an
interruptible sleep.
4. Meanwhile, functionfs_unbind() continues execution and attempts to
acquire ffs->mutex to tear down ep0req.
5. The kernel deadlocks because the configfs thread is stuck in an
uninterruptible sleep waiting for the mutex, while the userspace
daemon is in an interruptible sleep holding the mutex forever
because no more events will arrive.
To fix this, we drop both the waitqueue spinlock and ffs->mutex before
going to sleep, and use wait_event_interruptible_exclusive() instead.
Upon waking up, we jump back to the `retry` label to safely reacquire
the mutex and re-evaluate the state machine. By not sleeping with
ffs->mutex held, we natively decouple gadget teardowns (which require
the mutex) from userspace polling.
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260724204117.4036015-1-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool.
Fixes: 4037242c4f5f ("ARM: 6209/3: at91_udc: Add vbus polarity and polling mode")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260719042839.3167094-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
f_midi2_alloc_inst() creates default configfs child groups for the
default endpoint and default block using configfs_add_default_group(),
setting their internal refcount to 1.
However, during function teardown in f_midi2_free_inst() or EP cleanup
in f_midi2_ep_opts_release(), configfs_remove_default_groups() is
never called, therefore never dropping the refcount and leaking struct
f_midi2_ep_opts and f_midi2_block_opts.
Add the missing configfs_remove_default_groups() in the afformentioned
functions to free the structs properly.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+eaa106d192c9daf37f95@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eaa106d192c9daf37f95
Tested-by: syzbot+eaa106d192c9daf37f95@syzkaller.appspotmail.com
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://patch.msgid.link/20260730135811.1498-1-joshua.crofts1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In uvcg_video_init(), if kthread_run_worker() fails,
the error logged uses uvcg_err(), however, the pointer it uses:
video->uvc is not assigned at this point, triggering a null
pointer dereference. Fix this by directly using uvc->func which
is assigned already.
Reported-by: syzbot+8dcac923582c28505fd7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8dcac923582c28505fd7
Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffin Philip <jeffinphilip14@gmail.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260804034338.7976-1-jeffinphilip14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review.
Fixes: 100e25738659 ("usb: typec: Add driver for Thunderbolt 3 Alternate Mode")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260802014959.416687-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHCI 1.0 allowed these pointers to be zero. Some Intel chipsets from the
era usually set it to zero, but sometimes (apparently) to the next TRB
after the one referenced by the previous transfer event on the endpoint.
Usually that's indeed the missed TD, but it may also be the last TRB of
a two-TRB TD already completed with Short Packet on its first TRB. Then
the driver skips all pending TDs, failing to find a match.
When handling Missed Service Error, scan TD list twice and only really
skip TDs in the second pass if the first pass found a match. This won't
catch bogus pointers to wrong TDs, but such a bug would be practically
impossible to detect automatically and isn't known to exist.
Reported-by: Bart Nagel <bart@tremby.net>
Closes: https://lore.kernel.org/linux-usb/al_hchyOdPoPWKEo@spiral/
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: d0b619599e52 ("usb: xhci: Expedite skipping missed isoch TDs on modern HCs")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
handle_port_status() drops every USB3 port event when xhci->shared_hcd is
NULL. The check dates from a time when xhci-plat always created a shared
hcd, so a NULL one could only mean the hcd had been removed.
Since commit 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if
either root hub has no ports") that is no longer true. A controller whose
USB2 root hub has no ports gets a single roothub, the USB3 rhub is served
by the main hcd, and shared_hcd stays NULL for the lifetime of the device.
Every SuperSpeed port event is then thrown away as bogus behind a debug
message, so devices never enumerate even though the port sees the device
and its change bits stay set:
0x006a1203 Powered Connected Enabled Link:U0 PortSpeed:4
Change: CSC WRC PRC PLC
Broadcom Northstar is such a controller. USB3 works there up to 5.15 and
stops working from 5.19 onwards.
Ask xhci_get_usb3_hcd() instead. It returns the shared hcd when there is
one, the main hcd when the USB2 root hub has no ports, and NULL once the
shared hcd is gone, which keeps the original meaning of the check.
Tested on an Asus RT-N18U (BCM47081), which has a single roothub. Before
the change nothing enumerates on the USB3 port; after it SuperSpeed
devices enumerate normally over repeated connect and disconnect cycles,
the change bits shown above clear, and USB2 is unaffected on both ports.
Fixes: 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports")
Cc: stable@vger.kernel.org
Signed-off-by: Semih Baskan <strst.gs@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Non-ASCII characters trigger git send-email to prompt for encoding on each
modification near them, which is unnecessary and annoying.
Using plain ASCII avoids these prompts and does not change its meaning.
This change only affects comments and has no functional impact.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'xhci_virt_ep' struct currently contains a pointer to its parent
'xhci_hcd' struct. Since all endpoint-related structs are contained
within 'xhci_hcd', this pointer is redundant.
Remove the 'xhci' pointer from 'xhci_virt_ep' and instead pass it
explicitly to functions that require it, as some already do it.
This change reduces unnecessary complexity and aligns the code with
the rest of the xhci driver.
Memory impact:
For each device connected a struct 'xhci_virt_device' is allocated,
this struct conatains a 31 slot array of struct 'xhci_virt_ep'.
A USB hub consumes 1 slot, but every downstream device consumes
another slot.
This means that the total memory saved buy this patch is:
Devices * 31 * 8 bytes
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ring_doorbell_for_active_rings() rings the doorbell
for any rings with pending URBs. It has a trivial wrapper,
xhci_ring_doorbell_for_active_rings(), which takes the same
arguments and simply calls the former.
Since the wrapper adds no functionality, remove it and rename
ring_doorbell_for_active_rings() to xhci_ring_doorbell_for_active_rings().
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify by replace BIT(0) call with its relevant macro.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch aims to unify the format of register macros and masks within
the xHCI driver. Currently, register macros have inconsistent bit-field
masks, get macros, and set macros, with varying naming conventions and
functionalities.
==================== Proposal ====================
* Introduce a standardized approach by using only mask macros for each bit
field, leveraging GENMASK() for enhanced clarity.
#define HCC_MAX_PSA GENMASK(15, 12)
* Utilize FIELD_GET() and FIELD_PREP() macros directly in the C code for
getting and setting values, ensuring consistency and readability.
u32 psa = FIELD_GET(HCC_MAX_PSA, reg);
* Maintain exceptions for macros that perform custom operations.
#define CTX_SIZE(_hcc) (_hcc & HCC_64BYTE_CONTEXT ? 64 : 32)
* Note, while FIELD_*() macros are beneficial, I am not suggesting that
they should always be used. Instead, use them where they simplify the
code and eliminate the necessity for custom get/set macros.
In the example below, additional FIELD_PREP() or FIELD_MODIFY() is not
beneficial.
#define HCS_MAX_SCRATCHPAD(p) (FIELD_GET(HCS_MAX_SP_HI, (p)) << 5 | \
FIELD_GET(HCS_MAX_SP_LO, (p)))
==================== Improvements ====================
Simplified Macros:
By reducing custom macros, the code becomes more straightforward.
Macros FIELD_GET() and FIELD_PREP() are commonly used, which contributes
to the code readability and consistency.
$ git grep -n 'FIELD_GET' | wc -l
9027
$ git grep -n 'FIELD_PREP' | wc -l
15407
Consistent Return Type:
All bit macros will return unsigned 64-bit values, mitigating potential
cross-architecture issues.
Unified Bit Range Definition:
The mask macro will define bit ranges, eliminating separate definitions
for get/set macros. Because, FIELD_GET() & FIELD_PREP() use mask macro.
Cleaner header file with less macros:
Fewer macros result in a cleaner and more manageable header file.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal.
Fixes: 66d4eadd8d06 ("USB: xhci: BIOS handoff and HW initialization.")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
idr_destroy() is already called on error paths in dbc_tty_init(). Do not
call it again on exit. For symmetry with the init side, also use
IS_ERR_OR_NULL() to gate the exit steps.
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to set dbc_tty_driver to NULL to match the check in
dbc_tty_exit(). For that, make detached error handling path common to the
other branch in the same function.
Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable@vger.kernel.org # v5.10
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If tty_register_driver() fails, it drops the reference, but fails to set
the global dbc_tty_driver to NULL, causing the unregister to be called
again when module exits.
On module unload dbc_tty_exit() only gates its cleanup on the driver
pointer being non-NULL, so it operates on the already-freed driver:
module_init(xhci_hcd_init)
xhci_hcd_init()
xhci_dbc_init() [return value ignored]
dbc_tty_init()
tty_register_driver() fails
tty_driver_kref_put() -> driver freed
(dbc_tty_driver left dangling)
...
module_exit(xhci_hcd_fini)
xhci_hcd_fini()
xhci_dbc_exit()
dbc_tty_exit()
if (dbc_tty_driver) -> true (dangling)
tty_unregister_driver() -> use-after-free
Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable@vger.kernel.org # v5.10
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a ring stops on a TD that is about to be cancelled then the xHC ring
hardware dequeue pointer needs to move past the TD to flush TRBs from
xHC cache.
The TRB after the cancelled TD might be a no-op TRB, or a link TRB.
Moving the dequeue to a link TRB has caused isses on some hosts, and
moving it to a no-op TRB can be an issue for control endpoints as
xhci specification 4.8.3 'Endpoint Context State" states that
The Default Control Endpoint shall return to the Running state when the
Doorbell is rung for the next Setup Stage TD sent to the endpoint.
Solve this by always moving the dequeue pointer to the next valid
TD. If ring is empty and there are no queued TDs then move the dequeue
pointer to the enqueue pointer.
If enqueue points to a link TRB on a empty ring then propagate enqueue
to next segment before pointing dequeue to it.
Note that this patch ended up almost identical to a simplifiaction patch
done earlier by Michal Pecio, see link. That patch was not added due to a
potential, somewhat theoretical issue of moving dequeue backwards.
Turns out improving cancelled control transfers end up with the same code,
and is now worth taking.
Code is very likely subconsciously based the patch by Michal Pecio.
Link: https://lore.kernel.org/linux-usb/20250225125939.7a248e38@foxbook/
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid all extra endpoint state changes after the roothub link
is lost due to disconnect or link error, and endpoint is known
to be in a non-running state.
Rapid endpoint state changes involving endpoint reset, restart, and
stopping the endpoint have caused xHC failures to complete stop
endpoint command. xhci driver sees this as a fatal flaw and tears
down xhci.
These endpoint state changes are normally part of recovery from
transaction errors or URB cancel.
In this case recovery is not needed.
Add an endpoint state called EP_DROP_PENDING.
Set ep->ep_state |= EP_DROP_PENDING when an endpoint is found in a
halted or stopped non-running state, and the roothub link is
lost. Prevent endpoint from restarting.
URB cancel doesn't need to stop the endpoint if EP_DROP_PENDONG is set.
URBs can be given back directly.
Endpoint is, and will remain stopped until it's dropped.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prevent transfer retry and endpoint recovery if the device or its parent
disconnected from the roothub. Just like link error case.
There is a suspicion some xHC controllers may stop processing endpoint
related commands after the last USB device disconnects from the host.
Disconnect often causes transaction errors, xhci driver tries to (soft)
reset and restart the endpoint to recover it.
Hub driver again will cancel all pending URBs once disconnect is detected,
stopping the endpoint right after (soft) reset restarted it.
xHC controller sometimes fail to complete the stop endpoint command,
leading to driver timing out, and tearing down xhci
Prevent extra endpoint (soft) reset after xhci driver is aware of the
parent roothub port disconnect.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver already prevents useless transfer retry and endpoint recovery
for devices directly connected to a root port with link errors.
These devices are either disconnecting or will be reset. Link is gone.
Move the flag indicating link error from the xhci device structure to
the root port strucure, allowing all child devices behind hubs to easily
check for root port link errors, avoiding useless transfer retries and
endpoint recovery.
This extends the previous endpoint recovery prevention in
commit b8c3b718087b ("usb: xhci: Don't try to recover an endpoint if port
is in error state.")
Only root port link errors can be detected early by xhci driver,
not link errors between external hubs and their children.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The frame id field can be set for the first TD of the first isoc
URB to schedule the start of an isoc stream even in host doesn't
support CFC (Contiguous Frame ID Capability)
Set the frame ID TRB field of the first isoc TD unless URB has the
schedule immediately 'URB_ISO_ASAP' transfer flag set.
cc: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check if the expected frame IDs for a isochronous URB submitted
mid stream is within the valid frame time window that xHC controller
is capable of queuing TDs.
The range only needs to be checked once per URB as the isoc TDs of an
URB are queued in one go with spinlock held and interrupts disabled.
Calculate the valid frame window start and end frame id in frames
instead of microframes to better match how xhci specification
section 4.11.2.5 does it.
Don't add frame id gaps or change scheduling to SIA mid stream if
the start frame is outside the valid frame winow.
Only print a debug message.
Some devices can't handle gaps in isochronous transfers.
Calculate a valid start frame for the first URB of a stream, and
align it to a full frame, or to interval start if interval is longer
than a frame
Set urb->start_frame value for every URB
cc: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.3-rc1
Here are the USB serial updates for 7.3-rc1, including:
- fix digi_acceleport port registration order
- stop digi_acceleport I/O when ports are closed
- fix digi_acceleport OOB port dev_printk()
- fix metro-usb unthrottle race
- fix option slab OOB read with malicious devices
- add support for a new class of Prolific PL256X devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add support for PL256X multi-port devices
USB: serial: option: fix slab OOB read in interrupt URB callback
USB: serial: keyspan_pda: drop unused driver data usb-serial pointer
USB: serial: metro-usb: drop redundant initialisations
USB: serial: metro-usb: fix unthrottle race
USB: serial: metro-usb: replace unnecessary atomic allocation
USB: serial: digi_acceleport: fix oob port dev_printk()
USB: serial: digi_acceleport: clean up inb command submission
USB: serial: digi_acceleport: clean up write completion
USB: serial: digi_acceleport: clean up xfer buf length expression
USB: serial: digi_acceleport: drop unused in-buf define
USB: serial: digi_acceleport: stop OOB I/O when not in use
USB: serial: digi_acceleport: drop redundant driver data sanity checks
USB: serial: digi_acceleport: clean up declarations and whitespace
USB: serial: digi_acceleport: add oob port helper
USB: serial: digi_acceleport: always stop write urb on close
USB: serial: digi_acceleport: drop unused wait queue
USB: serial: digi_acceleport: fix port registration order
USB: serial: digi_acceleport: do not log stopping of urbs as errors
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial fixes for 7.2-rc7
Here is a fix for a long-standing issue in the spcp8x5 driver which
syzbot just started hitting and a change adding lockdep annotation to
digi_acceleport to suppress a false positive deadlock warning.
Note that only the digi_acceleport commit has been in linux-next (and
with no reported issues).
* tag 'usb-serial-7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: spcp8x5: drop broken carrier detect support
USB: serial: digi_acceleport: add port lock nesting annotation
|
|
We need the USB fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc8).
No conflicts.
Adjacent changes:
drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
5f3a13e0bb5e ("net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling")
d661abdc30c2 ("net: ngbe: correct misleading interrupt comment")
drivers/net/ipvlan/ipvlan_main.c
e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev")
00a40d809207 ("ipvlan: Support per-netns netdev unregistration.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.3
Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports
Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos
Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data
Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header
* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
soc: fsl: guts: use a macro to encode the DCFG CCSR space
soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
soc: fsl: dpio: fix kernel-doc typos
soc: fsl: fix kernel-doc warnings and typos
bus: fsl-mc: Remove redundant dev_err()
soc: fsl: qe: Add support of IRQs in QE GPIO
soc: fsl: qe: Rename irq variable to parent_irq
soc: fsl: qe: Convert to generic IRQ chip
soc: fsl: qe: Handle spurious interrupts
soc: fsl: qe: Iterate over all pending interrupts in cascade handler
soc: fsl: qe: Use generic_handle_domain_irq()
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The driver does not support modem status notifications and instead used
to fetch the modem status once at open() and subsequently operate on and
report stale state.
As part of fixing this, a call to fetch the status was added to
carrier_raised(), which does not work as that callback must not sleep
(e.g. unlike tiocmget()).
Drop the broken carrier detect support.
Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support")
Cc: stable@vger.kernel.org # 3.10
Reported-by: syzbot+3b514b87202742f22c44@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/6a73cea2.01d0871a.3a0d52.000d.GAE@google.com
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
In cxacru_unbind(), cancel_delayed_work_sync() was conditionally skipped
when poll_state was CXPOLL_STOPPED. However, a work item previously
scheduled when poll_state was CXPOLL_POLLING may still be pending in the
workqueue at the time poll_state transitions to CXPOLL_STOPPED. Skipping
cancel_delayed_work_sync() in this case allows the work to fire after
cxacru_data is freed, causing a use-after-free when cxacru_poll_status()
attempts to acquire instance->poll_state_serialize.
Fix this by always calling cancel_delayed_work_sync() regardless of
poll_state, ensuring no pending or in-flight work can access the freed
instance.
Cc: stable+noautosel@kernel.org # untested fix to a driver init path race
Reported-by: syzbot+24eb38c789655fc43663@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24eb38c789655fc43663
Signed-off-by: Nguyen Quang Le Kien <khiemtranzo532001@gmail.com>
Link: https://patch.msgid.link/20260803101716.2592486-1-khiemtranzo532001@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
