| Age | Commit message (Collapse) | Author |
|---|
|
Extent buffer pages allocated by alloc_extent_buffer() are attached to
btree_inode->i_mapping (the buffer_tree path), reach the LRU, and are
served by the btree_migrate_folio aops in fs/btrfs/disk-io.c. They are
migratable in practice once their owning extent buffer hits refs == 1,
which happens naturally. The buddy allocator classifies them by GFP,
however, and bare GFP_NOFS lands them in MIGRATE_UNMOVABLE pageblocks.
The result: every btree_inode page we read in pins an unmovable pageblock
from the page-superblock allocator's perspective, even though the page
itself can be moved.
Have each caller of btrfs_alloc_page_array, btrfs_alloc_folio_array,
and alloc_eb_folio_array pass in the full GFP mask directly, instead
of having the functions calculate it from boolean flags.
The alloc_extent_buffer call site passes GFP_NOFS | __GFP_NOFAIL |
__GFP_MOVABLE. All other call sites pass plain GFP_NOFS.
Three categories of caller stay on bare GFP_NOFS, deliberately:
- alloc_dummy_extent_buffer / btrfs_clone_extent_buffer: the
resulting eb is EXTENT_BUFFER_UNMAPPED, folio->mapping stays NULL,
the folios never enter LRU, never get migrate_folio aops. Tagging
them __GFP_MOVABLE would violate the page allocator's migrability
contract and they would defeat compaction in MOVABLE pageblocks
where isolate_migratepages_block skips non-LRU non-movable_ops
pages outright.
- btrfs_alloc_page_array callers in fs/btrfs/raid56.c (stripe
pages), fs/btrfs/inode.c (encoded reads), fs/btrfs/ioctl.c (io_uring
encoded reads), fs/btrfs/relocation.c (relocation buffers): same
contract violation. raid56 stripe_pages additionally persist in
the stripe cache (RBIO_CACHE_SIZE=1024) well beyond a single I/O,
so they are not transient enough to hand-wave the contract.
- btrfs_alloc_folio_array caller in fs/btrfs/scrub.c (stripe
folios): same -- stripe->folios[] are private buffers freed via
folio_put in release_scrub_stripe.
This change targets the dominant fragmentation source observed on the
page-superblock series: ~28 GB of btree_inode pages parked across
many tainted superpageblocks on a 250 GB test system with btrfs root,
preventing 1 GiB hugepage allocation from those regions. With the
movable hint, those pages now land in MOVABLE pageblocks where the
existing background defragger drains them through the standard
PB_has_movable gate, no LRU-sample fallback needed.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs has an internal flag/subpage bitmap called ordered, which is to
indicate that a block has corresponding ordered extent covering it.
However this requires extra synchronization between the inode ordered
tree, and the folio flag/subpage bitmap, not to mention we need to
maintain the extra folio flag with subpage bitmap.
As a step to align btrfs_folio_state more closely to iomap_folio_state,
remove the btrfs specific ordered flag/bitmap.
This will also save us 64 bytes for the bitmap of a huge folio.
Since we're here, also update the ASCII graph of the bitmap, as there
are only 3 sub-bitmaps now, show all sub-bitmaps directly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently during folio writeback, we call folio_clear_dirty_for_io()
before extent_writepage(), which causes folio dirty flag to be cleared,
but without touching the subpage bitmaps.
This works fine for the bio submission path, as we always call
btrfs_folio_clear_dirty() to clear the subpage bitmap.
But this is far from consistent, thus this patch is going to unify the
behavior to always use btrfs_folio_clear_dirty() helper to clear both
folio flag and subpage bitmap.
This involves:
- Replace folio_clear_dirty_for_io() with folio_test_dirty()
There is only one call site calling folio_clear_dirty_for_io() outside
of subpage.c, that's inside extent_write_cache_pages() just before
extent_writepage().
- Make btrfs_invalidate_folio() clear dirty range for the whole folio
The function btrfs_invalidate_folio() is also called during
extent_writepage().
If we had a folio completely beyond isize, we call
folio_invalidate() -> btrfs_invalidate_folio() to free the folio.
Since we no longer have folio_clear_dirty_for_io() to clear the folio
dirty flag, we must manually clear the folio dirty flag for the
to-be-invalidated folio, and also clear the PAGECACHE_TAG_DIRTY tag.
The tag clearing is done using a new helper,
btrfs_clear_folio_dirty_tag(), which is almost the same as the old
btree_clear_folio_dirty_tag(), but with minor improvements including:
* Remove the folio_test_dirty() check
We have already done an ASSERT().
* Add an ASSERT() to make sure folio is mapped
- Add extra ASSERT()s before clearing folio private
During development I hit dirty folios without the private flag set,
and that caused a lot of ASSERT()s.
The reason is that btrfs_invalidate_folio() is relying on the dirty
flag being cleared when it's called from extent_writepage().
Add extra ASSERT()s inside clear_folio_extent_mapped() to catch
wild dirty/writeback flags.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function extent_invalidate_folio() has only a single caller inside
btree_invalidate_folio().
There is no need to export such a function just for a single caller inside
another file.
Unexport extent_invalidate_folio() and move it to disk-io.c.
And since we're moving the code, update the commit to match the current
style, and remove the seemingly stale comment on the extent state
removal, it's better explained by the comment just before
btrfs_unlock_extent().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When we unmount the fs or during mount failures, btrfs will call
invalidate_inode_pages() to release all btree inode folios.
However that function can return -EBUSY if any folios can not be
invalidated.
This can be caused by:
- Some extent buffers are still held by btrfs
This is a logic error, as we should release all tree root nodes
during unmount and mount failure handling.
- Some extent buffers are under readahead and haven't yet finished
These are much rarer but valid cases.
In that case we should wait for those extent buffers.
Introduce a new helper invalidate_and_check_btree_folios() which will:
- Call invalidate_inode_pages2() and catch its return value
If it returned 0 as expected, that's great and we can call it a day.
- Otherwise go through each extent buffer in buffer_tree
Increase the ref by one first for the eb we're checking.
This is to ensure the eb won't be freed after the readahead is
finished.
For ebs that still have EXTENT_BUFFER_READING flag, wait for them to
finish first.
After waiting for the readahead, check the refs of the eb and if it's
still dirty.
If the eb ref count is greater than 2 (one for the buffer tree, one
held by us), it means we are still holding the extent buffer somewhere
else, which is a code bug.
If the eb is still dirty, it means a bug in transaction handling, e.g.
the bug fixed by patch "btrfs: only release the dirty pages io tree
after successful writes".
For either case, show a warning message about the eb, including its
bytenr, owner, refs and flags.
And if it's a debug build, also trigger WARN_ON_ONCE() so that fstests
can properly catch such situation.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221270
Reported-by: AHN SEOK-YOUNG <iamsyahn@gmail.com>
CC: Teng Liu <27rabbitlt@gmail.com>
Tested-by: Teng Liu <27rabbitlt@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently for tree block readahead we never pass a
btrfs_tree_parent_check with @has_first_key set.
Without @has_first_key set, btrfs will skip the following extra
checks:
- Header generation check
This is a minor one.
- Empty leaf/node checks
This is more serious, for certain trees like the csum tree, they are
allowed to be empty, thus an empty leaf can pass the tree checker.
But if there is a parent node for such an empty leaf, it indicates
corruption.
Without @has_first_key set, we can no longer detect such a problem.
In fact there is already a fuzzed image report that a corrupted csum
leaf which has zero nritems but still has a parent node can trigger
a BUG_ON() during csum deletion.
However there are only two call sites of btrfs_readahead_tree_block():
- Inside relocate_tree_blocks()
At this call site we are trying to grab the first key of the tree
block, thus we are not able to pass a @first_key parameter.
- Inside btrfs_readahead_node_child()
This is the more common call site, where we have the parent node and
want to readahead the child tree blocks.
In this case we can easily grab the node key and pass it for checks.
Add a new parameter @first_key to btrfs_readahead_tree_block() and pass
the node key to it inside btrfs_readahead_node_child().
This should plug the gap in empty leaf detection during readahead.
Link: https://lore.kernel.org/linux-btrfs/20260409071255.3358044-1-gality369@gmail.com/
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When qgroups are enabled, __btrfs_qgroup_release_data() and
qgroup_free_reserved_data() pass an extent_changeset to
btrfs_clear_record_extent_bits() to track how many bytes had their
EXTENT_QGROUP_RESERVED bits cleared. Inside the extent IO tree spinlock,
add_extent_changeset() calls ulist_add() with GFP_ATOMIC to record each
changed range. If this allocation fails, it hits a BUG_ON and panics the
kernel.
However, both of these callers only read changeset.bytes_changed
afterwards — the range_changed ulist is populated and immediately freed
without ever being iterated. The GFP_ATOMIC allocation is entirely
unnecessary for these paths.
Introduce extent_changeset_init_bytes_only() which uses a sentinel value
(EXTENT_CHANGESET_BYTES_ONLY) on the ulist's prealloc field to signal
that only bytes_changed should be tracked. add_extent_changeset() checks
for this sentinel and returns early after updating bytes_changed,
skipping the ulist_add() call entirely. This eliminates the GFP_ATOMIC
allocation and makes the BUG_ON unreachable for these paths.
Callers that need range tracking (qgroup_reserve_data,
qgroup_unreserve_range, btrfs_qgroup_check_reserved_leak) continue to
use extent_changeset_init() and are unaffected.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inhibit writeback on COW'd extent buffers for the lifetime of the
transaction handle, preventing background writeback from setting
BTRFS_HEADER_FLAG_WRITTEN and causing unnecessary re-COW.
COW amplification occurs when background writeback flushes an extent
buffer that a transaction handle is still actively modifying. When
lock_extent_buffer_for_io() transitions a buffer from dirty to
writeback, it sets BTRFS_HEADER_FLAG_WRITTEN, marking the block as
having been persisted to disk at its current bytenr. Once WRITTEN is
set, should_cow_block() must either COW the block again or overwrite
it in place, both of which are unnecessary overhead when the buffer
is still being modified by the same handle that allocated it. By
inhibiting background writeback on actively-used buffers, WRITTEN is
never set while a transaction handle holds a reference to the buffer,
avoiding this overhead entirely.
Add an atomic_t writeback_inhibitors counter to struct extent_buffer,
which fits in an existing 6-byte hole without increasing struct size.
When a buffer is COW'd in btrfs_force_cow_block(), call
btrfs_inhibit_eb_writeback() to store the eb in the transaction
handle's writeback_inhibited_ebs xarray (keyed by eb->start), take a
reference, and increment writeback_inhibitors. The function handles
dedup (same eb inhibited twice by the same handle) and replacement
(different eb at the same logical address). Allocation failure is
graceful: the buffer simply falls back to the pre-existing behavior
where it may be written back and re-COW'd.
Also inhibit writeback in should_cow_block() when COW is skipped,
so that every transaction handle that reuses an already-COW'd buffer
also inhibits its writeback. Without this, if handle A COWs a block
and inhibits it, and handle B later reuses the same block without
inhibiting, handle A's uninhibit on end_transaction leaves the buffer
unprotected while handle B is still using it. This ensures all handles
that access a COW'd buffer contribute to the inhibitor count, and the
buffer remains protected until the last handle releases it.
In lock_extent_buffer_for_io(), when writeback_inhibitors is non-zero
and the writeback mode is WB_SYNC_NONE, skip the buffer. WB_SYNC_NONE
is used by the VM flusher threads for background and periodic
writeback, which are the only paths that cause COW amplification by
opportunistically writing out dirty extent buffers mid-transaction.
Skipping these is safe because the buffers remain dirty in the page
cache and will be written out at transaction commit time.
WB_SYNC_ALL must always proceed regardless of writeback_inhibitors.
This is required for correctness in the fsync path: btrfs_sync_log()
writes log tree blocks via filemap_fdatawrite_range() (WB_SYNC_ALL)
while the transaction handle that inhibited those same blocks is still
active. Without the WB_SYNC_ALL bypass, those inhibited log tree
blocks would be silently skipped, resulting in an incomplete log on
disk and corruption on replay. btrfs_write_and_wait_transaction()
also uses WB_SYNC_ALL via filemap_fdatawrite_range(); for that path,
inhibitors are already cleared beforehand, but the bypass ensures
correctness regardless.
Uninhibit in __btrfs_end_transaction() before atomic_dec(num_writers)
to prevent a race where the committer proceeds while buffers are still
inhibited. Also uninhibit in btrfs_commit_transaction() before writing
and in cleanup_transaction() for the error path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of open coding testing the uptodate bit on the extent buffer's
flags, use the existing helper extent_buffer_uptodate() (which is even
shorter to type). Also change the helper's return value from int to bool,
since we always use it in a boolean context.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing.
CC: stable@vger.kernel.org
CC: Jan Kara <jack@suse.cz>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When I tried to remove btrfs_bio::fs_info and use btrfs_bio::inode to
grab the fs_info, the header "btrfs_inode.h" is needed to access the
full btrfs_inode structure.
Then btrfs will fail to compile.
[CAUSE]
There is a recursive including chain:
"bio.h" -> "btrfs_inode.h" -> "extent_map.h" -> "compression.h" ->
"bio.h"
That recursive including is causing problems for btrfs.
[ENHANCEMENT]
To reduce the risk of recursive including:
- Remove unnecessary local includes from btrfs headers
Either the included header is pulled in by other headers, or is
completely unnecessary.
- Remove btrfs local includes if the header only requires a pointer
In that case let the implementing C file to pull the required header.
This is especially important for headers like "btrfs_inode.h" which
pulls in a lot of other btrfs headers, thus it's a mine field of
recursive including.
- Remove unnecessary temporary structure definition
Either if we have included the header defining the structure, or
completely unused.
Now including "btrfs_inode.h" inside "bio.h" is completely fine,
although "btrfs_inode.h" still includes "extent_map.h", but that header
only includes "fs.h", no more chain back to "bio.h".
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This includes the following preparation for bs > ps cases:
- Always alloc/free the folio directly if bs > ps
This adds a new @fs_info parameter for btrfs_alloc_compr_folio(), thus
affecting all compression algorithms.
For btrfs_free_compr_folio() it needs no parameter for now, as we can
use the folio size to skip the caching part.
For now the change is just to passing a @fs_info into the function,
all the folio size assumption is still based on page size.
- Properly zero the last folio in compress_file_range()
Since the compressed folios can be larger than a page, we need to
properly zero the whole folio.
- Use correct folio size for btrfs_add_compressed_bio_folios()
Instead of page size, use the correct folio size.
- Use correct folio size/shift for btrfs_compress_filemap_get_folio()
As we are not only using simple page sized folios anymore.
- Use correct folio size for btrfs_decompress()
There is an ASSERT() making sure the decompressed range is no larger
than a page, which will be triggered for bs > ps cases.
- Skip readahead for compressed pages
Similar to subpage cases.
- Make btrfs_alloc_folio_array() to accept a new @order parameter
- Add a helper to calculate the minimal folio size
All those changes should not affect the existing bs <= ps handling.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All the callers want is to determine if a bit is set and all of them call
the function and do a double negation (!!) on its result to get a boolean.
So change it to return a boolean and simplify callers.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a bare atomic, use the refcount_t type, which despite
being a structure that contains only an atomic, has an API that checks
for underflows and other hazards. This doesn't change the size of the
extent_buffer structure.
This removes the need to do things like this:
WARN_ON(atomic_read(&eb->refs) == 0);
if (atomic_dec_and_test(&eb->refs)) {
(...)
}
And do just:
if (refcount_dec_and_test(&eb->refs)) {
(...)
}
Since refcount_dec_and_test() already triggers a warning when we decrement
a ref count that has a value of 0 (or below zero).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we have this ugly back and forth with the btree writeback
where we find the folio, find the eb associated with that folio, and
then attempt to writeback. This results in two different paths for
subpage ebs and >= page size ebs.
Clean this up by adding our own infrastructure around looking up tagged
ebs and writing the ebs out directly. This allows us to unify the
subpage and >= pagesize IO paths, resulting in a much cleaner writeback
path for extent buffers.
I ran this through fsperf on a VM with 8 CPUs and 16GiB of RAM. I used
smallfiles100k, but reduced the files to 1k to make it run faster, the
results are as follows, with the statistically significant improvements
marked with *, there were no regressions. fsperf was run with -n 10 for
both runs, so the baseline is the average 10 runs and the test is the
average of 10 runs.
smallfiles100k results
metric baseline current stdev diff
================================================================================
avg_commit_ms 68.58 58.44 3.35 -14.79% *
commits 270.60 254.70 16.24 -5.88%
dev_read_iops 48 48 0 0.00%
dev_read_kbytes 1044 1044 0 0.00%
dev_write_iops 866117.90 850028.10 14292.20 -1.86%
dev_write_kbytes 10939976.40 10605701.20 351330.32 -3.06%
elapsed 49.30 33 1.64 -33.06% *
end_state_mount_ns 41251498.80 35773220.70 2531205.32 -13.28% *
end_state_umount_ns 1.90e+09 1.50e+09 14186226.85 -21.38% *
max_commit_ms 139 111.60 9.72 -19.71% *
sys_cpu 4.90 3.86 0.88 -21.29%
write_bw_bytes 42935768.20 64318451.10 1609415.05 49.80% *
write_clat_ns_mean 366431.69 243202.60 14161.98 -33.63% *
write_clat_ns_p50 49203.20 20992 264.40 -57.34% *
write_clat_ns_p99 827392 653721.60 65904.74 -20.99% *
write_io_kbytes 2035940 2035940 0 0.00%
write_iops 10482.37 15702.75 392.92 49.80% *
write_lat_ns_max 1.01e+08 90516129 3910102.06 -10.29% *
write_lat_ns_mean 366556.19 243308.48 14154.51 -33.62% *
As you can see we get about a 33% decrease runtime, with a 50%
throughput increase, which is pretty significant.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unsigned type is a recommended practice (CWE-190, CWE-194) for bit
shifts to avoid problems with potential unwanted sign extensions.
Although there are no such cases in btrfs codebase, follow the
recommendation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is set after inserting the eb to the buffer tree and cleared
on it's removal. It was added in commit 34b41acec1ccc0 ("Btrfs: use a
bit to track if we're in the radix tree") and wanted to make use of it,
faa2dbf004e89e ("Btrfs: add sanity tests for new qgroup accounting
code"). Both are 10+ years old, we can remove the flag.
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is no longer being used. It was added by commit a826d6dcb32d
("Btrfs: check items for correctness as we search") but it's no longer
being used after commit f26c92386028 ("btrfs: remove reada
infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is no longer being used. It was added by commit ab0fff03055d
("btrfs: add READAHEAD extent buffer flag") and used in commits:
79fb65a1f6d9 ("Btrfs: don't call readahead hook until we have read the entire eb")
78e62c02abb9 ("btrfs: Remove extent_io_ops::readpage_io_failed_hook")
371cdc0700c7 ("btrfs: introduce subpage metadata validation check")
Finally all the code using it was removed by commit f26c92386028 ("btrfs: remove
reada infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag was added by commit 656f30dba7ab ("Btrfs: be aware of btree
inode write errors to avoid fs corruption") but it stopped being used
after commit 046b562b20a5 ("btrfs: use a separate end_io handler for
read_extent_buffer").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The functions qualify for the pure attribute as they always return the
same value for the same argument (in the given scope). This allows to
optimize the calls and cache the value.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After previous patch removing nodesize from parameters,
__alloc_dummy_extent_buffer() and alloc_dummy_extent_buffer() are
identical so we can drop one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers pass a valid fs_info so we can read the nodesize from that
instead of passing it as parameter.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Last use was in the readahead code that got removed by f26c9238602856
("btrfs: remove reada infrastructure").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The simple helper can be inlined, no need for the separate function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function set_page_extent_mapped() is now a simple wrapper so use the
folio helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And page_to_inode() can be replaced with folio_to_inode() now.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Now clear_page_extent_mapped() can deal with a folio
directly, so change its name to clear_folio_extent_mapped().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This mostly uses folios, convert it to take a folio instead and update
the callers to pass in the folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of taking the locked page, take the locked folio so we can pass
that into __process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing in a page for locked_page, pass in the folio instead.
We only use the folio itself to validate some range assumptions, and
then pass it into other functions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is only used inside inode.c by compress_file_range(),
so move it to inode.c and unexport it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is only one caller utilizing the @extra_gfp parameter,
alloc_eb_folio_array(). And in that case the extra_gfp is only assigned
to __GFP_NOFAIL.
Rename the @extra_gfp parameter to @nofail to indicate that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_alloc_folio_array() is only utilized in
btrfs_submit_compressed_read() and no other location, and the only
caller is not utilizing the @extra_gfp parameter.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When qgroups are enabled, during data reservation, we allocate the
ulist_nodes that track the exact reserved extents with GFP_ATOMIC
unconditionally. This is unnecessary, and we can follow the model
already employed by the struct extent_state we preallocate in the non
qgroups case, which should reduce the risk of allocation failures with
GFP_ATOMIC.
Add a prealloc node to struct ulist which ulist_add will grab when it is
present, and try to allocate it before taking the tree lock while we can
still take advantage of a less strict gfp mask. The lifetime of that
node belongs to the new prealloc field, until it is used, at which point
it belongs to the ulist linked list.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the core of the fiemap code lives in extent_io.c, which does
not make any sense because it's not related to extent IO at all (and it
was not as well before the big rewrite of fiemap I did some time ago).
The entry point for fiemap, btrfs_fiemap(), lives in inode.c since it's
an inode operation.
Since there's a significant amount of fiemap code, move all of it into a
dedicated file, including its entry point inode.c:btrfs_fiemap().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the lock_extent tightly coupled with
extent_clear_unlock_delalloc we can add a cached state to
extent_clear_unlock_delalloc and benefit from skipping the extra lookup
when we're doing cow.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently try_release_extent_mapping() as an int return type, but we
use it as a boolean. Its only caller, the release folio callback, also
returns a boolean which corresponds to try_release_extent_mapping()'s
return value. So change its return value type to bool as well as its
helper try_release_extent_state().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper will do the same thing as btrfs_alloc_page_array(), but
with folios.
One extra difference is, there is no extra helper for bulk allocation,
thus it may not be as efficient as the page version.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in having a static writepages callback in inode.c that
does nothing besides calling extent_writepages from extent_io.c.
So just remove the callback at inode.c and rename extent_writepages()
to btrfs_writepages().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in having a static readahead callback in inode.c that
does nothing besides calling extent_readahead() from extent_io.c.
So just remove the callback at inode.c and rename extent_readahead()
to btrfs_readahead().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in more headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Turn set_page_extent_mapped() into a wrapper around this version.
Saves a call to compound_head() for callers who already have a folio
and removes a couple of users of page->mapping.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need to do a forward declaration of struct extent_map_tree at
extent_io.h, as there are no function prototypes, inline functions or data
structures that refer to struct extent_map_tree.
So remove that forward declaration, which is not needed since commit
477a30ba5f8d ("btrfs: Sink extent_tree arguments in
try_release_extent_mapping").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
