| Age | Commit message (Collapse) | Author |
|---|
|
Btrfs relies on mapping_set_folio_order_range() to set the minimal
folio order for all its data inodes, but that function will be no-op if
transparent hugepage is not enabled.
Guard the bs > ps support behind CONFIG_TRANSPARENT_HUGEPAGE, just like
all other filesystems.
Fixes: 98077f7f2180 ("btrfs: enable experimental bs > ps support")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make btrfs use the library APIs instead of crypto_shash, for all
checksum computations. This has many benefits:
- Allows future checksum types, e.g. XXH3 or CRC64, to be more easily
supported. Only a library API will be needed, not crypto_shash too.
- Eliminates the overhead of the generic crypto layer, including an
indirect call for every function call and other API overhead. A
microbenchmark of btrfs_check_read_bio() with crc32c checksums shows a
speedup from 658 cycles to 608 cycles per 4096-byte block.
- Decreases the stack usage of btrfs by reducing the size of checksum
contexts from 384 bytes to 240 bytes, and by eliminating the need for
some functions to declare a checksum context at all.
- Increases reliability. The library functions always succeed and
return void. In contrast, crypto_shash can fail and return errors.
Also, the library functions are guaranteed to be available when btrfs
is loaded; there's no longer any need to use module softdeps to try to
work around the crypto modules sometimes not being loaded.
- Fixes a bug where blake2b checksums didn't work on kernels booted with
fips=1. Since btrfs checksums are for integrity only, it's fine for
them to use non-FIPS-approved algorithms.
Note that with having to handle 4 algorithms instead of just 1-2, this
commit does result in a slightly positive diffstat. That being said,
this wouldn't have been the case if btrfs had actually checked for
errors from crypto_shash, which technically it should have been doing.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With all the preparation patches, we're able to finally enable btrfs
block size (sector size) larger than page size support and give it a
full fstests run.
And obviously this new feature is hidden behind experimental flags, and
should not be considered as a core feature yet as btrfs' default block
size is still 4K.
But this is still a feature that will shine in the future where 16K
block sized device are widely adopted.
For now there are some features explicitly disabled:
- Direct IO
This is the most complex part to support, the root reason is we can
not control the pages of iov iter passed in.
User space programs can only ensure the virtual addresses are
contiguous, but have no control on their physical addresses.
Our bs > ps support heavily relies on large folios, and direct IO
memory can easily break it.
So direct IO is disabled and will always fall back to buffered IO.
- RAID56
In theory we can convert RAID56 to use large folios, but it will need
to be converted back to page based if we want to support direct IO in
the future.
So just reject it for now.
- Encoded send
- Encoded read
Both are utilizing btrfs_encoded_read_regular_fill_pages(), and send
is utilizing vmallocated memory.
Unfortunately for vmallocated memory we can not guarantee the minimal
folio order.
For send, it will just always fallback to regular writes, which reads
from page cache and will follow the existing folio order requirement.
- Encoded write
Encoded write itself is allocating pages by themselves, and we can
easily change it to follow the minimal order.
But since encoded read is already disabled, there is no need to only
enable encoded write.
Finally just like what we did for bs < ps support in the past, add a
warning message for bs > ps mounts.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This involves converting the following functions to use proper folio
sizes/shifts:
- zstd_compress_folios()
- zstd_decompress_bio()
The function zstd_decompress() is already using block size correctly
without using page size, thus it needs no modification.
And since zstd compression is calling kmap_local_folio(), the existing
code cannot handle large folios with HIGHMEM, as kmap_local_folio()
requires us to handle one page range each time.
I do not really think it's worth to spend time on some feature that will
be deprecated eventually. So here just add an extra explicit rejection
for bs > ps with HIGHMEM feature enabled kernels.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently if block size < page size, btrfs only supports one single
config, 4K.
This is mostly to reduce the test configurations, as 4K is going to be
the default block size for all architectures.
However all other major filesystems have no artificial limits on the
support block size, and some are already supporting block size > page
sizes.
Since the btrfs subpage block support has been there for a long time,
it's time for us to enable all block size <= page size support.
So here enable all block sizes support as long as it's no larger than
page size for experimental builds.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Annual typo fixing pass. Strangely codespell found only about 30% of
what is in this patch, the rest was done manually using text
spellchecker with a custom dictionary of acceptable terms.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we manually check the block size against 3 different values:
- 4K
- PAGE_SIZE
- MIN_BLOCKSIZE
Those 3 values can match or differ from each other. This makes it
pretty complex to output the supported block sizes.
Considering we're going to add block size > page size support soon, this
can make the support block size sysfs attribute much harder to
implement.
To make it easier, factor out a helper, btrfs_supported_blocksize() to
do a simple check for the block size.
Then utilize it in the two locations:
- btrfs_validate_super()
This is very straightforward
- supported_sectorsizes_show()
Iterate through all valid block sizes, and only output supported ones.
This is to make future full range block sizes support much easier.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass over all header files and add missing forward declarations,
includes or fix include types.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_is_empty_uuid() we have our custom code to check if an uuid is
empty, however there a kernel uuid library that has a function named
uuid_is_null() which does the same and probably more efficient.
So change btrfs_is_empty_uuid() to use uuid_is_null(), which is almost
a directly replacement, it just wraps the necessary casting since our
uuid types are u8 arrays while the uuid kernel library uses the uuid_t
type, which is just a typedef of an u8 array of 16 elements as well.
Also since the function is now to trivial, make it a static inline
function in fs.h.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's a generic helper not specific to ioctls and used in several places,
so move it out from ioctl.c and into fs.c. While at it change its return
type from int to bool and declare the loop variable in the loop itself.
This also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781340 161037 16920 1959297 1de581 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The declarations for the exclusive operation functions are located at fs.h
but their definitions are in ioctl.c, which doesn't make much sense since
(most of them) are used in several files other than ioctl.c. Since they
are used in several files and they are generic enough, move them out of
ioctl.c and into fs.c, even the ones that are currently only used at
ioctl.c, for the sake of having them all in the same C file.
This also reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ctree module is about the implementation of the btree data structure
and not a place holder for generic filesystem things like the csum
algorithm details. Move the functions related to the csum algorithm
details away from ctree.c and into fs.c, which is a far better place for
them. Also fix missing punctuation in comments and change one multiline
comment to a single line comment since everything fits in under 80
characters.
For some reason this also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Since the introduction of per-fs feature sysfs interface
(/sys/fs/btrfs/<UUID>/features/), the content of that directory is never
updated.
Thus for the following case, that directory will not show the new
features like RAID56:
# mkfs.btrfs -f $dev1 $dev2 $dev3
# mount $dev1 $mnt
# btrfs balance start -f -mconvert=raid5 $mnt
# ls /sys/fs/btrfs/$uuid/features/
extended_iref free_space_tree no_holes skinny_metadata
While after unmount and mount, we got the correct features:
# umount $mnt
# mount $dev1 $mnt
# ls /sys/fs/btrfs/$uuid/features/
extended_iref free_space_tree no_holes raid56 skinny_metadata
[CAUSE]
Because we never really try to update the content of per-fs features/
directory.
We had an attempt to update the features directory dynamically in commit
14e46e04958d ("btrfs: synchronize incompat feature bits with sysfs
files"), but unfortunately it get reverted in commit e410e34fad91
("Revert "btrfs: synchronize incompat feature bits with sysfs files"").
The problem in the original patch is, in the context of
btrfs_create_chunk(), we can not afford to update the sysfs group.
The exported but never utilized function, btrfs_sysfs_feature_update()
is the leftover of such attempt. As even if we go sysfs_update_group(),
new files will need extra memory allocation, and we have no way to
specify the sysfs update to go GFP_NOFS.
[FIX]
This patch will address the old problem by doing asynchronous sysfs
update in the cleaner thread.
This involves the following changes:
- Make __btrfs_(set|clear)_fs_(incompat|compat_ro) helpers to set
BTRFS_FS_FEATURE_CHANGED flag when needed
- Update btrfs_sysfs_feature_update() to use sysfs_update_group()
And drop unnecessary arguments.
- Call btrfs_sysfs_feature_update() in cleaner_kthread
If we have the BTRFS_FS_FEATURE_CHANGED flag set.
- Wake up cleaner_kthread in btrfs_commit_transaction if we have
BTRFS_FS_FEATURE_CHANGED flag
By this, all the previously dangerous call sites like
btrfs_create_chunk() need no new changes, as above helpers would
have already set the BTRFS_FS_FEATURE_CHANGED flag.
The real work happens at cleaner_kthread, thus we pay the cost of
delaying the update to sysfs directory, but the delayed time should be
small enough that end user can not distinguish though it might get
delayed if the cleaner thread is busy with removing subvolumes or
defrag.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a large patch, but because they're all macros it's impossible to
split up. Simply copy all of the item accessors in ctree.h and paste
them in accessors.h, and then update any files to include the header so
everything compiles.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments, style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing() and the read only helpers that also aren't directly
related to the ctree code. Move these into a fs.h header, which will
serve as the location for file system wide related helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
