| Age | Commit message (Collapse) | Author |
|---|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During Function Level Reset recovery, the MANA driver reads
hardware BAR0 registers that may temporarily contain garbage values.
The SHM (Shared Memory) offset read from GDMA_REG_SHM_OFFSET is used
to compute gc->shm_base, which is later dereferenced via readl() in
mana_smc_poll_register(). If the hardware returns an unaligned or
out-of-range value, the driver must not blindly use it, as this would
propagate the hardware error into a kernel crash.
The following crash was observed on an arm64 Hyper-V guest running
kernel 6.17.0-3013-azure during VF reset recovery triggered by HWC
timeout.
[13291.785274] Unable to handle kernel paging request at virtual address ffff8000a200001b
[13291.785311] Mem abort info:
[13291.785332] ESR = 0x0000000096000021
[13291.785343] EC = 0x25: DABT (current EL), IL = 32 bits
[13291.785355] SET = 0, FnV = 0
[13291.785363] EA = 0, S1PTW = 0
[13291.785372] FSC = 0x21: alignment fault
[13291.785382] Data abort info:
[13291.785391] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
[13291.785404] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[13291.785412] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[13291.785421] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000014df3a1000
[13291.785432] [ffff8000a200001b] pgd=1000000100438403, p4d=1000000100438403, pud=1000000100439403, pmd=0068000fc2000711
[13291.785703] Internal error: Oops: 0000000096000021 [#1] SMP
[13291.830975] Modules linked in: tls qrtr mana_ib ib_uverbs ib_core xt_owner xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables cfg80211 8021q garp mrp stp llc binfmt_misc joydev serio_raw nls_iso8859_1 hid_generic aes_ce_blk aes_ce_cipher polyval_ce ghash_ce sm4_ce_gcm sm4_ce_ccm sm4_ce sm4_ce_cipher hid_hyperv sm4 sm3_ce sha3_ce hv_netvsc hid vmgenid hyperv_keyboard hyperv_drm sch_fq_codel nvme_fabrics efi_pstore dm_multipath nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vmw_vmci vsock dmi_sysfs ip_tables x_tables autofs4
[13291.862630] CPU: 122 UID: 0 PID: 61796 Comm: kworker/122:2 Tainted: G W 6.17.0-3013-azure #13-Ubuntu VOLUNTARY
[13291.869902] Tainted: [W]=WARN
[13291.871901] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 01/08/2026
[13291.878086] Workqueue: events mana_serv_func
[13291.880718] pstate: 62400005 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[13291.884835] pc : mana_smc_poll_register+0x48/0xb0
[13291.887902] lr : mana_smc_setup_hwc+0x70/0x1c0
[13291.890493] sp : ffff8000ab79bbb0
[13291.892364] x29: ffff8000ab79bbb0 x28: ffff00410c8b5900 x27: ffff00410d630680
[13291.896252] x26: ffff004171f9fd80 x25: 000000016ed55000 x24: 000000017f37e000
[13291.899990] x23: 0000000000000000 x22: 000000016ed55000 x21: 0000000000000000
[13291.904497] x20: ffff8000a200001b x19: 0000000000004e20 x18: ffff8000a6183050
[13291.908308] x17: 0000000000000000 x16: 0000000000000000 x15: 000000000000000a
[13291.912542] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000000
[13291.916298] x11: 0000000000000000 x10: 0000000000000001 x9 : ffffc45006af1bd8
[13291.920945] x8 : ffff000151129000 x7 : 0000000000000000 x6 : 0000000000000000
[13291.925293] x5 : 000000015f214000 x4 : 000000017217a000 x3 : 000000016ed50000
[13291.930436] x2 : 000000016ed55000 x1 : 0000000000000000 x0 : ffff8000a1ffffff
[13291.934342] Call trace:
[13291.935736] mana_smc_poll_register+0x48/0xb0 (P)
[13291.938611] mana_smc_setup_hwc+0x70/0x1c0
[13291.941113] mana_hwc_create_channel+0x1a0/0x3a0
[13291.944283] mana_gd_setup+0x16c/0x398
[13291.946584] mana_gd_resume+0x24/0x70
[13291.948917] mana_do_service+0x13c/0x1d0
[13291.951583] mana_serv_func+0x34/0x68
[13291.953732] process_one_work+0x168/0x3d0
[13291.956745] worker_thread+0x2ac/0x480
[13291.959104] kthread+0xf8/0x110
[13291.961026] ret_from_fork+0x10/0x20
[13291.963560] Code: d2807d00 9417c551 71000673 54000220 (b9400281)
[13291.967299] ---[ end trace 0000000000000000 ]---
Disassembly of mana_smc_poll_register() around the crash site:
Disassembly of section .text:
00000000000047c8 <mana_smc_poll_register>:
47c8: d503201f nop
47cc: d503201f nop
47d0: d503233f paciasp
47d4: f800865e str x30, [x18], #8
47d8: a9bd7bfd stp x29, x30, [sp, #-48]!
47dc: 910003fd mov x29, sp
47e0: a90153f3 stp x19, x20, [sp, #16]
47e4: 91007014 add x20, x0, #0x1c
47e8: 5289c413 mov w19, #0x4e20
47ec: f90013f5 str x21, [sp, #32]
47f0: 12001c35 and w21, w1, #0xff
47f4: 14000008 b 4814 <mana_smc_poll_register+0x4c>
47f8: 36f801e1 tbz w1, #31, 4834 <mana_smc_poll_register+0x6c>
47fc: 52800042 mov w2, #0x2
4800: d280fa01 mov x1, #0x7d0
4804: d2807d00 mov x0, #0x3e8
4808: 94000000 bl 0 <usleep_range_state>
480c: 71000673 subs w19, w19, #0x1
4810: 54000200 b.eq 4850 <mana_smc_poll_register+0x88>
4814: b9400281 ldr w1, [x20] <-- **** CRASHED HERE *****
4818: d50331bf dmb oshld
481c: 2a0103e2 mov w2, w1
...
From the crash signature x20 = ffff8000a200001b, this address
ends in 0x1b which is not 4-byte aligned, so the 'ldr w1, [x20]'
instruction (readl) triggers the arm64 alignment fault (FSC = 0x21).
The root cause is in mana_gd_init_vf_regs(), which computes:
gc->shm_base = gc->bar0_va + mana_gd_r64(gc, GDMA_REG_SHM_OFFSET);
The offset is used without any validation. The same problem exists
in mana_gd_init_pf_regs() for sriov_base_off and sriov_shm_off.
Fix this by validating all offsets before use:
- VF: check shm_off is within BAR0, properly aligned to 4 bytes
(readl requirement), and leaves room for the full 256-bit
(32-byte) SMC aperture.
- PF: check sriov_base_off is within BAR0, aligned to 8 bytes
(readq requirement), and leaves room to safely read the
sriov_shm_off register at sriov_base_off + GDMA_PF_REG_SHM_OFF.
Then check sriov_shm_off leaves room for the full SMC aperture.
All arithmetic uses subtraction rather than addition to avoid
integer overflow on garbage values.
Define SMC_APERTURE_SIZE (32 bytes, derived from the 256-bit aperture
width)
Return -EPROTO on invalid values. The existing recovery path in
mana_serv_reset() already handles -EPROTO by falling through to PCI
device rescan, giving the hardware another chance to present valid
register values after reset.
Fixes: 9bf66036d686 ("net: mana: Handle hardware recovery events when probing the device")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/afQUMClyjmBVfD+u@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a cfg80211_chandef_add_npca() helper function that takes an
existing chandef without NPCA and sets the NPCA information from
the format used in UHR operation and UHR Parameters Update.
Link: https://patch.msgid.link/20260428112708.5cdc4e69a306.I95d396ac671da438f340b1afb735ebfe33164894@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For UHR multi-link power management, the driver/device needs
to know if the AP supports it, to be able to use it. Track
the AP's extended MLD capabilities and operations so it does.
Link: https://patch.msgid.link/20260428110915.e4038a00e4b2.I323686be5d4a73e8b962019a30d51309496b86a6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The max_channel_switch_time field in struct wiphy_nan_capa was documented
as being in milliseconds, but it is actually in microseconds as defined
in the Wi-Fi Aware specification and as indicated in the nl80211
NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME attribute.
Fix the documentation to say microseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504121734.d0a0152f7d8c.I47e5c91f7ead4f8006fb13f9194d95a55cf9c398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
kernel test robot reported this Sparse warning:
$ make C=1 net/ipv4/ipmr.o
net/ipv4/ipmr.c:312:24: error: incompatible types in comparison expression (different address spaces):
net/ipv4/ipmr.c:312:24: struct mr_table [noderef] __rcu *
net/ipv4/ipmr.c:312:24: struct mr_table *
Let's add __rcu annotation to netns_ipv4.mrt.
Fixes: b3b6babf4751 ("ipmr: Free mr_table after RCU grace period.")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605030032.glNApko7-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502180755.359554-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In MLD, MRC and QQIC fields are not correctly encoded when
generating query packets. Since the receiver of the query
interprets these fields using the MLDv2 floating-point
decoding logic, any value that exceeds the linear threshold
is incorrectly parsed as an exponential value, leading to
an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC (16-bit) and QQIC (8-bit) fields are
properly encoded when transmitting query packets with
intervals that exceed their respective linear thresholds
(32768 for MRD; 128 for QQI).
RFC3810: If Maximum Response Code >= 32768, the Maximum
Response Code field represents a floating-point value as
follows:
0 1 2 3 4 5 6 7 8 9 A B C D E F
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC3810: If QQIC >= 128, the QQIC field represents a
floating-point value as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-5-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename mldv2_mrc() to mldv2_mrd() as it is used to calculate
the Maximum Response Delay from the Maximum Response Code.
Introduce a new API mldv2_qqi() to define the existing
calculation logic of QQI from QQIC. This also organizes
the existing mld_update_qi() API.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-3-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1) Using this_cpu_inc() is better than going through this_cpu_ptr():
- Single instruction on x86.
- Store tearing prevention.
2) Change tcf_action_update_stats() to use this_cpu_add().
3) Add WRITE_ONCE() to __qdisc_qstats_drop() and qstats_drop_inc()
in preparation for lockless "tc qdisc show".
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 3/17 up/down: 72/-216 (-144)
Function old new delta
dualpi2_enqueue_skb 462 511 +49
tcf_ife_act 1061 1077 +16
taprio_enqueue 613 620 +7
codel_qdisc_enqueue 149 143 -6
tcf_vlan_act 684 676 -8
tcf_skbedit_act 626 618 -8
tcf_police_act 725 717 -8
tcf_mpls_act 1297 1289 -8
tcf_gate_act 310 302 -8
tcf_gact_act 222 214 -8
tcf_csum_act 2438 2430 -8
tcf_bpf_act 709 701 -8
tcf_action_update_stats 124 115 -9
pie_qdisc_enqueue 865 856 -9
pfifo_enqueue 116 107 -9
choke_enqueue 2069 2059 -10
plug_enqueue 139 128 -11
bfifo_enqueue 121 110 -11
tcf_nat_act 1501 1489 -12
gred_enqueue 1743 1668 -75
Total: Before=24388609, After=24388465, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260501135916.2566766-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ip_vs_ctl.c file and the associated ip_vs.h file are the only places
in the kernel where HK_TYPE_KTHREAD cpumask is being retrieved and used.
Now that HK_TYPE_KTHREAD/HK_TYPE_DOMAIN cpumask can be changed at run
time. We need to use RCU to guard access to this cpumask to avoid a
potential UAF problem as the returned cpumask may be freed before it
is being used.
We can replace HK_TYPE_KTHREAD by HK_TYPE_DOMAIN as they are aliases
of each other, but keeping the HK_TYPE_KTHREAD name can highlight the
fact that it is the kthread initiated by ipvs that is being controlled.
Fixes: 03ff73510169 ("cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko reports for races and possible crash around
the usage of est_cpulist_valid and sysctl_est_cpulist.
The problem is that we do not lock est_mutex in some
places which can lead to wrong write ordering and
as result problems when calling cpumask_weight()
and cpumask_empty().
Fix them by moving the est_max_threads read/write under
locked est_mutex. Do the same for one ip_vs_est_reload_start()
call to protect the cpumask_empty() usage of sysctl_est_cpulist.
To remove the chance of deadlock while stopping the
estimation kthreads, keep the data structure for kthread 0
even after last estimator is removed and do not hold mutexes
while stopping this task. Now we will use a new flag 'needed'
to know when kthread 0 should run. The kthreads above 0
do not use mutexes, so stop them under est_mutex because
their kthread data still can be destroyed if they do not
serve estimators. Now all kthreads will be started by
the est_reload_work to properly serialize the stop/start
for kthread 0.
Reduce the use of service_mutex in ip_vs_est_calc_phase()
because under est_mutex we can safely walk est_kt_arr to
stop the kthreads above slot 0.
As ip_vs_stop_estimator() for tot_stats should be called
under service_mutex, do it early in the netns exit path
in ip_vs_flush() to avoid locking the mutex again later.
It still should be called in ip_vs_control_net_cleanup_sysctl()
when we are called during netns init error. Use -2 for ktid
as indicator if estimator was already stopped.
Finally, fix use-after-free for kd->est_row in
ip_vs_est_calc_phase(). est->ktrow should simply switch to
a delay value while estimator is linked to est_temp_list.
Link: https://sashiko.dev/#/patchset/20260331165015.2777765-1-longman%40redhat.com
Link: https://sashiko.dev/#/patchset/20260420171308.87192-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260422125123.40658-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260424175858.54752-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260425103918.7447-1-ja%40ssi.bg
Fixes: f0be83d54217 ("ipvs: add est_cpulist and est_nice sysctl vars")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Make the according transformations to the two users (sja1105 and felix).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260430114529.3536911-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/Space.c is the last remnant of the linux-2.4.x driver model
that required each subsystem and device driver init function to be called
from init/main.c explicitly, before the introduction of initcall levels.
In linux-7.0, this was only used for a handful of ISA network drivers,
with the ne2000 driver being the last one.
Fold the code into ne.c directly, with minimal changes to preserve
the existing command line parsing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cs89x0 driver is really two in one, and they are mutually exclusive:
- the ISA driver was used on 486-era PCs. It likely has no remaining
users, like the other ethernet drivers that got removed in
linux-7.1. The DMA support in here is the last device driver use of
the deprecated isa_bus_to_virt() interface, all other users are either
x86 specific or or got converted to the normal dma-mapping interface.
The driver was maintained by Andrew Morton at the time, based on
the linux-2.2 vendor driver from Cirrus Logic.
- the platform_driver instance was used on some embedded Arm boards
around the same time, such as the EP7211 Development Kit. This
is the same chip, but uses modern devicetree based probing and no DMA.
This was added by Alexander Shiyan.
Remove the ISA driver as a cleanup, including all of the outdated
documentation referring to its configuration.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Replace skb_try_make_writable() by skb_ensure_writable() in
nft_fwd_netdev and the flowtable to deal with uncloned packets
having their network header in paged fragments.
2) Drop packet if output device does not exist and ensure sufficient
headroom in nft_fwd_netdev before transmitting the skb.
3) Use the existing dup recursion counter in nft_fwd_netdev for the
neigh_xmit variant, from Weiming Shi.
4) Add .check_hooks interface to x_tables to detach the control plane
hook check based on the match/target configuration. Then, update
nft_compat to use .check_hooks from .validate path, this fixes a
lack of hook validation for several match/targets.
5) Fix incorrect .usersize in xt_CT, from Florian Westphal.
6) Fix a memleak with netdev tables in dormant state,
from Florian Westphal.
7) Several patches to check if the packet is a fragment, then skip
layer 4 inspection, for x_tables and nf_tables; as well as common
nf_socket infrastructure. The xt_hashlimit match drops fragments
to stay consistent with the existing approach when failing to parse
the layer 4 protocol header.
8) Ensure sufficient headroom in the flowtable before transmitting
the skb.
9) Fix the flowtable inline vlan approach for double-tagged vlan:
Reverse the iteration over .encap[] since it represents the
encapsulation as seen from the ingress path. Postpone pushing
layer 2 header so output device is available to calculate needed
headroom. Finally, add and use nf_flow_vlan_push() to fix it.
10) Fix flowtable inline pppoe with GSO packets. Moreover, use
FLOW_OFFLOAD_XMIT_DIRECT to fill up destination hardware
address since neighbour cache does not exist in pppoe.
11) Use skb_pull_rcsum() to decapsulate vlan and pppoe headers, for
double-tagged vlan in particular this should provide some benefits
in certain scenarios.
More notes regarding 9-11):
- sashiko is also signalling to use it for IPIP headers, but that needs
more adjustments such setting skb->protocol after removing the IPIP
header, will follow up in a separated patch.
- I plan to submit selftests to cover double-tagged-vlan. As for pppoe,
it should be possible but that would mandate a few userspace dependencies.
This has been semi-automatically tested by me and reporters describing
broken double-vlan-tagged and pppoe currently in the flowtable.
* tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
netfilter: flowtable: fix inline pppoe encapsulation in xmit path
netfilter: flowtable: fix inline vlan encapsulation in xmit path
netfilter: flowtable: ensure sufficient headroom in xmit path
netfilter: xtables: fix L4 header parsing for non-first fragments
netfilter: nf_tables: skip L4 header parsing for non-first fragments
netfilter: nf_socket: skip socket lookup for non-first fragments
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
netfilter: xt_CT: fix usersize for v1 and v2 revision
netfilter: nft_compat: run xt_check_hooks_{match,target}() from .validate
netfilter: x_tables: add .check_hooks to matches and targets
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
netfilter: nft_fwd_netdev: add device and headroom validate with neigh forwarding
netfilter: replace skb_try_make_writable() by skb_ensure_writable()
====================
Link: https://patch.msgid.link/20260501122237.296262-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_{skip_exthdr,find_hdr}() and ip6_{tnl_parse_tlv_enc_lim,
protocol_deliver_rcu}() iterate over IPv6 extension headers until they
find a non-extension-header protocol or run out of packet data. The
loops have no iteration counter, relying solely on the packet length
to bound them. For a crafted packet with 8-byte extension headers
filling a 64KB jumbogram, this means a worst case of up to ~8k
iterations with a skb_header_pointer call each. ipv6_skip_exthdr(),
for example, is used where it parses the inner quoted packet inside
an incoming ICMPv6 error:
- icmpv6_rcv
- checksum validation
- case ICMPV6_DEST_UNREACH
- icmpv6_notify
- pskb_may_pull() <- pull inner IPv6 header
- ipv6_skip_exthdr() <- iterates here
- pskb_may_pull()
- ipprot->err_handler() <- sk lookup
The per-iteration cost of ipv6_skip_exthdr itself is generally
light, but skb_header_pointer becomes more costly on reassembled
packets: the first ~1232 bytes of the inner packet are in the skb's
linear area, but the remaining ~63KB are in the frag_list where
skb_copy_bits is needed to read data.
Initially, the idea was to add a configurable limit via a new
sysctl knob with default 8, in line with knobs from commit
47d3d7ac656a ("ipv6: Implement limits on Hop-by-Hop and Destination
options"), but two reasons eventually argued against it:
- It adds to UAPI that needs to be maintained forever, and
upcoming work is restricting extension header ordering anyway,
leaving little reason for another sysctl knob
- exthdrs_core.c is always built-in even when CONFIG_IPV6=n,
where struct net has no .ipv6 member, so the read site would
need an ifdef'd fallback to a constant anyway
Therefore, just use a constant (IP6_MAX_EXT_HDRS_CNT). All four
extension header walking functions are now bound by this limit.
Note that the check in ip6_protocol_deliver_rcu() happens right
before the goto resubmit, such that we don't have to have a test
for ipv6_ext_hdr() in the fast-path.
There's an ongoing IETF draft-iurman-6man-eh-occurrences to enforce
IPv6 extension headers ordering and occurrence. The latter also
discusses security implications. As per RFC8200 section 4.1, the
occurrence rules for extension headers provide a practical upper
bound which is 8. In order to be conservative, let's define
IP6_MAX_EXT_HDRS_CNT as 12 to leave enough room for quirky setups.
In the unlikely event that this is still not enough, then we might
need to reconsider a sysctl.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260429154648.809751-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address two issues in the inline pppoe encapsulation:
- Add needs_gso_segment flag to segment PPPoE packets in software
given that there is no GSO support for this.
- Use FLOW_OFFLOAD_XMIT_DIRECT since neighbour cache is not available
in point-to-point device, use the hardware address that is obtained
via flowtable path discovery (ie. fill_forward_path).
Fixes: 18d27bed0880 ("netfilter: flowtable: inline pppoe encapsulation in xmit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc2).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_sigpool is no longer used. It existed only as a workaround for
issues in the design of the crypto_ahash API, which have been avoided by
switching to the much easier-to-use library APIs instead. Remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-6-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since tcp-ao now uses the crypto library API instead of crypto_ahash,
and MACs and keys now have a statically-known maximum size, many tcp-ao
functions can no longer fail. Propagate this change up into the return
types of various functions.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-5-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to inline tcp_mstamp_refresh() in fast path only:
- tcp_rcv_established()
- tcp_write_xmit()
Add tcp_mstamp_refresh_inline() for this purpose.
Add noinline qualifier on tcp_mstamp_refresh() for the other paths,
to reduce bloat.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 1/4 up/down: 26/-123 (-97)
Function old new delta
tcp_rcv_established 2238 2264 +26
tcp_connect 4027 4003 -24
tcp_tsq_write 152 120 -32
tcp_send_active_reset 476 444 -32
tcp_send_window_probe 235 200 -35
Total: Before=25316710, After=25316613, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260429010809.784315-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Fixes: 47e91f56008b ("bonding: use RCU protection for 3ad xmit path")
Reported-by: syzbot+9bb2ff2a4ab9e17307e1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69f0a82f.050a0220.3aadc4.0000.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260428123207.3809211-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qstats_overlimit_inc() is only used to increment per cpu overlimits.
It can use this_cpu_inc() to avoid this_cpu_ptr() extra cost
and avoid potential store tearing.
Change qstats_overlimit_inc() name and its argument type.
Also add a WRITE_ONCE() in qdisc_qstats_overlimit() to prevent
store tearing.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-91 (-91)
Function old new delta
tcf_skbmod_act 772 764 -8
tcf_police_act 733 725 -8
tcf_gate_act 318 310 -8
tcf_pedit_act 1295 1284 -11
tcf_mirred_to_dev 1126 1114 -12
tcf_ife_act 1077 1061 -16
tcf_mirred_act 1324 1296 -28
Total: Before=24274627, After=24274536, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260428070919.3109557-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit db359fccf212 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf212 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the
forwarding rule targets the same device or two devices forward to each
other, neigh_xmit() triggers dev_queue_xmit() which re-enters
nf_hook_egress(), causing infinite recursion and stack overflow.
Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT
to the shared header nf_dup_netdev.h as a static inline, so that
nft_fwd_netdev can use the recursion counter directly without exported
function call overhead. Guard neigh_xmit() with the same recursion
limit already used in nf_do_netdev_egress().
[ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
Fixes: f87b9464d152 ("netfilter: nft_fwd_netdev: Support egress hook")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) IEEE1394 ARP payload contains no target hardware address in the
ARP packet. Apparently, arp_tables was never updated to deal with
IEEE1394 ARP properly. To deal with this, return no match in case
the target hardware address selector is used, either for inverse or
normal match. Moreover, arpt_mangle disallows mangling of the target
hardware and IP address because, it is not worth to adjust the
offset calculation to fix this, we suspect no users of arp_tables
for this family.
2) Use list_del_rcu() to delete device hooks in nf_tables, this hook
list is RCU protected, concurrent netlink dump readers can be
walking on this list, fix it by adding a helper function and use it
for consistency. From Florian Westphal.
3) Add list_splice_rcu(), this is useful for joining the local list of
new device hooks to the RCU protected hook list in chain and
flowtable. Reviewed by Paul E. McKenney.
4) Use list_splice_rcu() to publish the new device hooks in chain and
flowtable to fix concurrent netlink dump traversal.
5) Add a new hook transaction object to track device hook deletions.
The current approach moves device hooks to be deleted around during
the preparation phase, this breaks concurrent RCU reader via netlink
dump. This new hook transaction is combined with NFT_HOOK_REMOVE
flag to annotate hooks for removal in the preparation phase.
6) xt_policy inbound policy check in strict mode can lead to
out-of-bound access of the secpath array due to incorrect.
The iteration over the secpath needs to be reversed in the inbound
to check for the human readable policy, expecting inner in first
position and outer in second position, the secpath from inbound
actually stores outer in first position then in second position.
From Jiexun Wang.
7) Fix possible zero shift in nft_bitwise triggering UBSAN splat,
reject zero shift from control plane, from Kai Ma.
8) Replace simple_strtoul() in the conntrack SIP helper since it relies
on nul-terminated strings. From Florian Westphal.
* tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_sip: don't use simple_strtoul
netfilter: reject zero shift in nft_bitwise
netfilter: xt_policy: fix strict mode inbound policy matching
netfilter: nf_tables: add hook transactions for device deletions
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
rculist: add list_splice_rcu() for private lists
netfilter: nf_tables: use list_del_rcu for netlink hooks
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
====================
Link: https://patch.msgid.link/20260428095840.51961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to providing HE/EHT/UHR operation, also check
and provide HT/VHT operation, so that drivers have it and
can use it, e.g. to correctly calculate station bandwidth.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.32ad98454543.Ia9692671b699164edcc0bdaf4fdbdbefc50b18f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The HT/VHT/HE/EHT/UHR operation can change, and might thus be
updated on each beacon update. Move them to the beacon struct
and parse them out of the beacon also on updates, not just on
starting the AP.
This also fixes checks in two ways:
- Regulatory checks in nl80211_validate_ap_phy_operation() are
now done also on updates, disallowing enabling HE/EHT/UHR on
channels that don't allow that after start. This checks only
operation now, but clients can't use it without operation.
- NL80211_ATTR_UHR_OPERATION is now required whenever UHR is
present in the beacon, and rejected otherwise.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.f70758a46904.I0d21120b41eed661eefc61d5417dadaae7145845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
