| Age | Commit message (Collapse) | Author |
|---|
|
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix.
Fixes: 30fff9231fad ("udp: bind() optimisation")
Reported-by: Andrew Onyshchuk <oandrew@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260319181817.1901357-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc5).
net/netfilter/nft_set_rbtree.c
598adea720b97 ("netfilter: revert nft_set_rbtree: validate open interval overlap")
3aea466a43998 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
https://lore.kernel.org/abgaQBpeGstdN4oq@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260317110347.363875-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For RX CQEs with type CQE_RX_COALESCED_4, to measure the coalescing
efficiency, add counters to count how many contains 2, 3, 4 packets
respectively.
Also, add a counter for the error case of first packet with length == 0.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-4-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our NIC can have up to 4 RX packets on 1 CQE. To support this feature,
check and process the type CQE_RX_COALESCED_4. The default setting is
disabled, to avoid possible regression on latency.
And, add ethtool handler to switch this feature. To turn it on, run:
ethtool -C <nic> rx-cqe-frames 4
To turn it off:
ethtool -C <nic> rx-cqe-frames 1
The rx-cqe-nsec is the time out value in nanoseconds after the first
packet arrival in a coalesced CQE to be sent. It's read-only for this
NIC.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-3-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- cfg80211:
- guarantee pmsr work is cancelled
- mac80211:
- reject TDLS operations on non-TDLS stations
- fix crash in AP_VLAN bandwidth change
- fix leak or double-free on some TX preparation
failures
- remove keys needed for beacons _after_ stopping
those
- fix debugfs static branch race
- avoid underflow in inactive time
- fix another NULL dereference in mesh on invalid
frames
- ti/wlcore: avoid infinite realloc loop
* tag 'wireless-2026-03-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
wifi: mac80211: fix NULL deref in mesh_matches_local()
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
wifi: mac80211: use jiffies_delta_to_msecs() for sta_info inactive times
wifi: mac80211: remove keys after disabling beaconing
wifi: mac80211_hwsim: fully initialise PMSR capabilities
====================
Link: https://patch.msgid.link/20260318172515.381148-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/kasan/common.c:287)
[ 238.086439][ T318] kmem_cache_free (mm/slub.c:6168 (discriminator 3) mm/slub.c:6298 (discriminator 3))
[ 238.087007][ T318] skb_release_data (net/core/skbuff.c:1139)
[ 238.087491][ T318] consume_skb (net/core/skbuff.c:1451)
[ 238.087757][ T318] teql_master_xmit (net/sched/sch_teql.c:358)
[ 238.088116][ T318] dev_hard_start_xmit (./include/linux/netdevice.h:5324 ./include/linux/netdevice.h:5333 net/core/dev.c:3871 net/core/dev.c:3887)
[ 238.088468][ T318] sch_direct_xmit (net/sched/sch_generic.c:347)
[ 238.088820][ T318] __qdisc_run (net/sched/sch_generic.c:420 (discriminator 1))
[ 238.089166][ T318] __dev_queue_xmit (./include/net/sch_generic.h:229 ./include/net/pkt_sched.h:121 ./include/net/pkt_sched.h:117 net/core/dev.c:4196 net/core/dev.c:4802)
Workflow to reproduce:
1. Initialize a TEQL topology (dummy0 and ifb0 as slaves, teql0 up).
2. Start multiple sender workers continuously transmitting packets
through teql0 to drive teql_master_xmit().
3. In parallel, repeatedly delete and re-add the root qdisc on
dummy0 and ifb0 via RTNETLINK, forcing frequent teardown and reset activity
(teql_destroy() / qdisc_reset()).
4. After running both workloads concurrently for several iterations,
KASAN reports slab-use-after-free or double-free in the skb free path.
Fix this by moving dev_reset_queue to sch_generic.h and calling it, instead
of qdisc_reset, in teql_destroy since it handles both the lock and lockless
cases correctly for root qdiscs.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Reported-by: Xianrui Dong <keenanat2000@gmail.com>
Tested-by: Xianrui Dong <keenanat2000@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260315155422.147256-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Seems we have been carrying around repeated defines for unaligned mode
logic. Remove redundant ones.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260313111931.438911-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple PFs may reside on the same physical chip, running a single
firmware. Some of the resources and configurations may be shared among
these PFs. Currently, there is no good object to pin the configuration
knobs on.
Introduce a shared devlink instance, instantiated upon probe of
the first PF and removed during remove of the last PF. The shared
devlink instance is not backed by any device device, as there is
no PCI device related to it.
The implementation uses reference counting to manage the lifecycle:
each PF that probes calls devlink_shd_get() to get or create
the shared instance, and calls devlink_shd_put() when it removes.
The shared instance is automatically destroyed when the last PF removes.
Example:
pci/0000:08:00.0: index 0
nested_devlink:
auxiliary/mlx5_core.eth.0
devlink_index/1: index 1
nested_devlink:
pci/0000:08:00.0
pci/0000:08:00.1
auxiliary/mlx5_core.eth.0: index 2
pci/0000:08:00.1: index 3
nested_devlink:
auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1: index 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation to dev-less devlinks, add devlink_dev_driver_name()
that returns the driver name stored in devlink struct, and use it in
all trace events.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce devlink_bus_name() and devlink_dev_name() helpers and
convert all direct accesses to devlink->dev->bus->name and
dev_name(devlink->dev) to use them.
This prepares for dev-less devlink instances where these helpers
will be extended to handle the missing device.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip[6]tunnel_xmit() can drop packets if a too deep recursion level
is detected.
Add SKB_DROP_REASON_RECURSION_LIMIT drop reason.
We will use this reason later in __dev_queue_xmit().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260312201824.203093-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, the Linux TCP implementation does not shrink the
advertised window (RFC 7323 calls this "window retraction") with the
following exceptions:
- When an incoming segment cannot be added due to the receive buffer
running out of memory. Since commit 8c670bdfa58e ("tcp: correct
handling of extreme memory squeeze") a zero window will be
advertised in this case. It turns out that reaching the required
memory pressure is easy when window scaling is in use. In the
simplest case, sending a sufficient number of segments smaller than
the scale factor to a receiver that does not read data is enough.
- Commit b650d953cd39 ("tcp: enforce receive buffer memory limits by
allowing the tcp window to shrink") addressed the "eating memory"
problem by introducing a sysctl knob that allows shrinking the
window before running out of memory.
However, RFC 7323 does not only state that shrinking the window is
necessary in some cases, it also formulates requirements for TCP
implementations when doing so (Section 2.4).
This commit addresses the receiver-side requirements: After retracting
the window, the peer may have a snd_nxt that lies within a previously
advertised window but is now beyond the retracted window. This means
that all incoming segments (including pure ACKs) will be rejected
until the application happens to read enough data to let the peer's
snd_nxt be in window again (which may be never).
To comply with RFC 7323, the receiver MUST honor any segment that
would have been in window for any ACK sent by the receiver and, when
window scaling is in effect, SHOULD track the maximum window sequence
number it has advertised. This patch tracks that maximum window
sequence number rcv_mwnd_seq throughout the connection and uses it in
tcp_sequence() when deciding whether a segment is acceptable.
rcv_mwnd_seq is updated together with rcv_wup and rcv_wnd in
tcp_select_window(). If we count tcp_sequence() as fast path, it is
read in the fast path. Therefore, rcv_mwnd_seq is put into rcv_wnd's
cacheline group.
The logic for handling received data in tcp_data_queue() is already
sufficient and does not need to be updated.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-1-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to pass the pointer down to many socket
lookup functions.
UDP-Lite gone, and we do not need to do that.
Let's fetch net->ipv4.udp_table only where needed in IPv4
stack: __udp4_lib_lookup(), __udp4_lib_mcast_deliver(),
and udp_diag_dump().
Some functions are renamed as the wrapper functions are no
longer needed.
__udp4_lib_err() -> udp_err()
__udp_diag_destroy() -> udp_diag_destroy()
udp_dump_one() -> udp_diag_dump_one()
udp_dump() -> udp_diag_dump()
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to pass the pointer down to many socket
lookup functions.
UDP-Lite gone, and we do not need to do that.
Let's fetch net->ipv4.udp_table only where needed in IPv6
stack: __udp6_lib_lookup() and __udp6_lib_mcast_deliver().
__udp6_lib_err() is renamed to udpv6_err() as its wrapper
is no longer needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to fetch them from different pointers for
procfs or bpf iterator.
UDP always has its global or per-netns table in
net->ipv4.udp_table and struct udp_seq_afinfo.udp_table
is NULL.
OTOH, UDP-Lite had only one global table in the pointer.
We no longer use the field.
Let's remove it and udp_get_table_seq().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite had dedicated socket hash tables for
each, we have had to fetch them from different pointers.
UDP always has its global or per-netns table in
net->ipv4.udp_table and struct proto.h.udp_table is NULL.
OTOH, UDP-Lite had only one global table in the pointer.
We no longer use the field.
Let's remove it and udp_get_table_prot().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite supports variable-length checksum and has two socket
options, UDPLITE_SEND_CSCOV and UDPLITE_RECV_CSCOV, to control
the checksum coverage.
Let's remove the support.
setsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was only
available for UDP-Lite and returned -ENOPROTOOPT for UDP.
Now, the options are handled in ip_setsockopt() and
ipv6_setsockopt(), which still return the same error.
getsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was available
for UDP and always returned 0, meaning full checksum, but now
-ENOPROTOOPT is returned.
Given that getsockopt() is meaningless for UDP and even the options
are not defined under include/uapi/, this should not be a problem.
$ man 7 udplite
...
BUGS
Where glibc support is missing, the following definitions
are needed:
#define IPPROTO_UDPLITE 136
#define UDPLITE_SEND_CSCOV 10
#define UDPLITE_RECV_CSCOV 11
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP TX paths also have some code for UDP-Lite partial
checksum:
* udplite_csum() in udp_send_skb() and udp_v6_send_skb()
* udplite_getfrag() in udp_sendmsg() and udpv6_sendmsg()
Let's remove such code.
Now, we can use IPPROTO_UDP directly instead of sk->sk_protocol
or fl6->flowi6_proto for csum_tcpudp_magic() and csum_ipv6_magic().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite supports the partial checksum and the coverage is
stored in the position of the length field of struct udphdr.
In RX paths, udp4_csum_init() / udp6_csum_init() save the value
in UDP_SKB_CB(skb)->cscov and set UDP_SKB_CB(skb)->partial_cov
to 1 if the coverage is not full.
The subsequent processing diverges depending on the value,
but such paths are now dead.
Also, these functions have some code guarded for UDP:
* udp_unicast_rcv_skb / udp6_unicast_rcv_skb
* __udp4_lib_rcv() and __udp6_lib_rcv().
Let's remove the partial csum code and the unnecessary
guard for UDP-Lite in RX.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite shared most of the code, we have had
to check the protocol every time we increment SNMP stats.
Now that the UDP-Lite paths are dead, let's remove UDP-Lite
SNMP stats.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have deprecated IPv6 UDP-Lite sockets.
Let's drop support for IPv4 UDP-Lite sockets as well.
Most of the changes are similar to the IPv6 patch: removing
udplite.c and udp_impl.h, marking most functions in udp_impl.h
as static, moving the prototype for udp_recvmsg() to udp.h, and
adding INDIRECT_CALLABLE_SCOPE for it.
In addition, the INET_DIAG support for UDP-Lite is dropped.
We will remove the remaining dead code in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As announced in commit be28c14ac8bb ("udplite: Print deprecation
notice."), it's time to deprecate UDP-Lite.
As a first step, let's drop support for IPv6 UDP-Lite sockets.
We will remove the remaining dead code gradually.
Along with the removal of udplite.c, most of the functions exposed
via udp_impl.h are made static.
The prototypes of udpv6_sendmsg() and udpv6_recvmsg() are moved
to udp.h, but only udpv6_recvmsg() has INDIRECT_CALLABLE_DECLARE()
because udpv6_sendmsg() is exported for rxrpc since commit ed472b0c8783
("rxrpc: Call udp_sendmsg() directly").
Also, udpv6_recvmsg() needs INDIRECT_CALLABLE_SCOPE for
CONFIG_MITIGATION_RETPOLINE=n.
Note that udplite.h is included temporarily for udplite_csum().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit a3d2599b2446 ("ipv{4,6}/udp{,lite}: simplify proc
registration"), udp4_seq_show() and udp6_seq_show() are not
used in net/ipv4/udplite.c and net/ipv6/udplite.c.
Instead, udp_seq_ops and udp6_seq_ops are exposed to UDP-Lite.
Let's make udp4_seq_show() and udp6_seq_show() static.
udp_seq_ops and udp6_seq_ops are moved to udp_impl.h so that
we can make them static when the header is removed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73ac3 ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 648946966a08 ("netfilter: nft_set_rbtree: validate
open interval overlap").
There have been reports of nft failing to laod valid rulesets after this
patch was merged into -stable.
I can reproduce several such problem with recent nft versions, including
nft 1.1.6 which is widely shipped by distributions.
We currently have little choice here.
This commit can be resurrected at some point once the nftables fix that
triggers the false overlap positive has appeared in common distros
(see e83e32c8d1cd ("mnl: restore create element command with large batches" in
nftables.git).
Fixes: 648946966a08 ("netfilter: nft_set_rbtree: validate open interval overlap")
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it.
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20260311123110.1471930-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current page_pool alloc-cache size and refill values were chosen to
match the NAPI budget and to leave headroom for XDP_DROP recycling.
These fixed values do not scale well with large pages,
as they significantly increase a given page_pool's memory footprint.
Scale these values to better balance memory footprint across page sizes,
while keeping behavior on 4KB-page systems unchanged.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260309081301.103152-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc4).
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
db25c42c2e1f9 ("net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ")
dff1c3164a692 ("net/mlx5e: SHAMPO, Always calculate page size")
https://lore.kernel.org/aa7ORohmf67EKihj@sirena.org.uk
drivers/net/ethernet/ti/am65-cpsw-nuss.c
840c9d13cb1ca ("net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support")
a23c657e332f2 ("net: ethernet: ti: am65-cpsw: Use also port number to identify timestamps")
https://lore.kernel.org/abK3EkIXuVgMyGI7@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit missed that both functions can be called with dev == NULL.
Also add unlikely() hints for these conditions that only fuzzers can hit.
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260312043908.2790803-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Majority of tcp_release_cb() calls do nothing at all.
Provide tcp_release_cb_cond() helper so that release_sock()
can avoid these calls.
Also hint the compiler that __release_sock() and wake_up()
are rarely called.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-77 (-77)
Function old new delta
release_sock 258 181 -77
Total: Before=25235790, After=25235713, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260310124451.2280968-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When no H2G transport is loaded, vsock currently routes all CIDs to the
G2H transport (commit 65b422d9b61b ("vsock: forward all packets to the
host when no H2G is registered"). Extend that existing behavior: when
an H2G transport is loaded but does not claim a given CID, the
connection falls back to G2H in the same way.
This matters in environments like Nitro Enclaves, where an instance may
run nested VMs via vhost-vsock (H2G) while also needing to reach sibling
enclaves at higher CIDs through virtio-vsock-pci (G2H). With the old
code, any CID > 2 was unconditionally routed to H2G when vhost was
loaded, making those enclaves unreachable without setting
VMADDR_FLAG_TO_HOST explicitly on every connect.
Requiring every application to set VMADDR_FLAG_TO_HOST creates friction:
tools like socat, iperf, and others would all need to learn about it.
The flag was introduced 6 years ago and I am still not aware of any tool
that supports it. Even if there was support, it would be cumbersome to
use. The most natural experience is a single CID address space where H2G
only wins for CIDs it actually owns, and everything else falls through to
G2H, extending the behavior that already exists when H2G is absent.
To give user space at least a hint that the kernel applied this logic,
automatically set the VMADDR_FLAG_TO_HOST on the remote address so it
can determine the path taken via getpeername().
Add a per-network namespace sysctl net.vsock.g2h_fallback (default 1).
At 0 it forces strict routing: H2G always wins for CID > VMADDR_CID_HOST,
or ENODEV if H2G is not loaded.
Signed-off-by: Alexander Graf <graf@amazon.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260304230027.59857-1-graf@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
net->xfrm.nlsk is used in 2 types of contexts:
- fully under RCU, with rcu_read_lock + rcu_dereference and a NULL check
- in the netlink handlers, with requests coming from a userspace socket
In the 2nd case, net->xfrm.nlsk is guaranteed to stay non-NULL and the
object is alive, since we can't enter the netns destruction path while
the user socket holds a reference on the netns.
After adding the __rcu annotation to netns_xfrm.nlsk (which silences
sparse warnings in the RCU users and __net_init code), we need to tell
sparse that the 2nd case is safe. Add a helper for that.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
While testing other changes in vng I noticed that
nl_netdev.page_pool_check flakes. This never happens in real CI.
Turns out vng may boot and get to that test in less than a second.
page_pool_detached() records the detach time in seconds, so if
vng is fast enough detach time is set to 0. Other code treats
0 as "not detached". detach_time is only used to report the state
to the user, so it's not a huge deal in practice but let's fix it.
Store the raw ktime_t (nanoseconds) instead. A nanosecond value
of 0 is practically impossible.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Fixes: 69cb4952b6f6 ("net: page_pool: report when page pool was destroyed")
Link: https://patch.msgid.link/20260310003907.3540019-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the current port selection algorithm, ports after a reserved port
range or long time used port are used more often than others [1]. This
causes an uneven port usage distribution. This combines with cloud
environments blocking connections between the application server and the
database server if there was a previous connection with the same source
port, leading to connectivity problems between applications on cloud
environments.
The real issue here is that these firewalls cannot cope with
standards-compliant port reuse. This is a workaround for such situations
and an improvement on the distribution of ports selected.
The proposed solution is to implement a variant of RFC 6056 Algorithm 5.
The step size is selected randomly on every connect() call ensuring it
is a coprime with respect to the size of the range of ports we want to
scan. This way, we can ensure that all ports within the range are
scanned before returning an error. To enable this algorithm, the user
must configure the new sysctl option "net.ipv4.ip_local_port_step_width".
In addition, on graphs generated we can observe that the distribution of
source ports is more even with the proposed approach. [2]
[1] https://0xffsoftware.com/port_graph_current_alg.html
[2] https://0xffsoftware.com/port_graph_random_step_alg.html
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260309023946.5473-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a part of MANA hardening for CVM, add validation for the doorbell
ID (db_id) received from hardware in the GDMA_REGISTER_DEVICE response
to prevent out-of-bounds memory access when calculating the doorbell
page address.
In mana_gd_ring_doorbell(), the doorbell page address is calculated as:
addr = db_page_base + db_page_size * db_index
= (bar0_va + db_page_off) + db_page_size * db_index
A hardware could return values that cause this address to fall outside
the BAR0 MMIO region. In Confidential VM environments, hardware responses
cannot be fully trusted.
Add the following validations:
- Store the BAR0 size (bar0_size) in gdma_context during probe.
- Validate the doorbell page offset (db_page_off) read from device
registers does not exceed bar0_size during initialization, converting
mana_gd_init_registers() to return an error code.
- Validate db_id from GDMA_REGISTER_DEVICE response against the
maximum number of doorbell pages that fit within BAR0.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260306211212.543376-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b626 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
tcp_chrono_start() is small enough, and used in TCP sendmsg()
fast path (from tcp_skb_entail()).
Note clang is already inlining it from functions in tcp_output.c.
Inlining it improves performance and reduces bloat :
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 1/-84 (-83)
Function old new delta
tcp_skb_entail 280 281 +1
__pfx_tcp_chrono_start 16 - -16
tcp_chrono_start 68 - -68
Total: Before=25192434, After=25192351, chg -0.00%
Note that tcp_chrono_stop() is too big.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260308123549.2924460-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some modern cpus disable X86_FEATURE_RETPOLINE feature,
even if a direct call can still be beneficial.
Even when IBRS is present, an indirect call is more expensive
than a direct one:
Direct Calls:
Compilers can perform powerful optimizations like inlining,
where the function body is directly inserted at the call site,
eliminating call overhead entirely.
Indirect Calls:
Inlining is much harder, if not impossible, because the compiler
doesn't know the target function at compile time.
Techniques like Indirect Call Promotion can help by using
profile-guided optimization to turn frequently taken indirect calls
into conditional direct calls, but they still add complexity
and potential overhead compared to a truly direct call.
In this patch, I split tc_skip_wrapper in two different
static keys, one for tc_act() (tc_skip_wrapper_act)
and one for tc_classify() (tc_skip_wrapper_cls).
Then I enable the tc_skip_wrapper_cls only if the count
of builtin classifiers is above one.
I enable tc_skip_wrapper_act only it the count of builtin
actions is above one.
In our production kernels, we only have CONFIG_NET_CLS_BPF=y
and CONFIG_NET_ACT_BPF=y. Other are modules or are not compiled.
Tested on AMD Turin cpus, cls_bpf_classify() cost went
from 1% down to 0.18 %, and FDO will be able to inline
it in tcf_classify() for further gains.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307133601.3863071-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 18fd64d25422 ("netns-ipv4: reorganize netns_ipv4 fast path
variables") missed that __tcp_select_window() is reading
net->ipv4.sysctl_tcp_shrink_window.
Move this field to netns_ipv4_read_txrx group, as __tcp_select_window()
is used both in tx and rx paths.
Saves a potential cache line miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260307092214.2433548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following typical script is extremely disruptive,
because each graft operation calls dev_deactivate()
which resets all the queues of the device.
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
done
One can add "ip link set dev $ETH down/up" to reduce the disruption time:
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
ip link set dev $ETH down
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
ip link set dev $ETH up
done
Or we can add a @reset_needed flag to dev_deactivate() and
dev_deactivate_many().
This flag is set to true at device dismantle or linkwatch_do_dev(),
and to false for graft operations.
In the future, we might only stop one queue instead of the whole
device, ie call dev_deactivate_queue() instead of dev_deactivate().
I think the problem (quadratic behavior) was added in commit
2fb541c862c9 ("net: sch_generic: aviod concurrent reset and enqueue op
for lockless qdisc") but this does not look serious enough to deserve
risky backports.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307163430.470644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_v4_early_demux() has a single caller : ip_rcv_finish_core().
Move it to net/ipv4/ip_input.c and mark it static, for possible
compiler/linker optimizations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260306131130.654991-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inode->i_ino is being converted to a u64. sock.sk_ino (which caches the
inode number) must also be widened to avoid truncation on 32-bit
architectures where unsigned long is only 32 bits.
Change sk_ino from unsigned long to u64, and update the return type
of sock_i_ino() to match. Fix all format strings that print the
result of sock_i_ino() (%lu -> %llu), and widen the intermediate
variables and function parameters in the diag modules that were
using int to hold the inode number.
Note that the UAPI socket diag structures (inet_diag_msg.idiag_inode,
unix_diag_msg.udiag_ino, etc.) are all __u32 and cannot be changed
without breaking the ABI. The assignments to those fields will
silently truncate, which is the existing behavior.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-3-2257ad83d372@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
S1G defines use of NDP Block Ack (BA) for aggregation, requiring negotiation
of NDP ADDBA/DELBA action frames. If the S1G recipient supports HT-immediate
block ack, the sender must send an NDP ADDBA Request indicating it expects
only NDP BlockAck frames for the agreement.
Introduce support for NDP ADDBA and DELBA exchange in mac80211. The
implementation negotiates the BA mechanism during setup based on station
capabilities and driver support (IEEE80211_HW_SUPPORTS_NDP_BLOCKACK).
If negotiation fails due to mismatched expectations, a rejection with status code
WLAN_STATUS_REJECTED_NDP_BLOCK_ACK_SUGGESTED is returned as per IEEE 802.11-2024.
Trace sample:
IEEE 802.11 Wireless Management
Fixed parameters
Category code: Block Ack (3)
Action code: NDP ADDBA Request (0x80)
Dialog token: 0x01
Block Ack Parameters: 0x1003, A-MSDUs, Block Ack Policy
.... .... .... ...1 = A-MSDUs: Permitted in QoS Data MPDUs
.... .... .... ..1. = Block Ack Policy: Immediate Block Ack
.... .... ..00 00.. = Traffic Identifier: 0x0
0001 0000 00.. .... = Number of Buffers (1 Buffer = 2304 Bytes): 64
Block Ack Timeout: 0x0000
Block Ack Starting Sequence Control (SSC): 0x0010
.... .... .... 0000 = Fragment: 0
0000 0000 0001 .... = Starting Sequence Number: 1
IEEE 802.11 Wireless Management
Fixed parameters
Category code: Block Ack (3)
Action code: NDP ADDBA Response (0x81)
Dialog token: 0x02
Status code: BlockAck negotiation refused because, due to buffer constraints and other unspecified reasons, the recipient prefers to generate only NDP BlockAck frames (0x006d)
Block Ack Parameters: 0x1002, Block Ack Policy
.... .... .... ...0 = A-MSDUs: Not Permitted
.... .... .... ..1. = Block Ack Policy: Immediate Block Ack
.... .... ..00 00.. = Traffic Identifier: 0x0
0001 0000 00.. .... = Number of Buffers (1 Buffer = 2304 Bytes): 64
Block Ack Timeout: 0x0000
Signed-off-by: Ria Thomas <ria.thomas@morsemicro.com>
Link: https://patch.msgid.link/20260305091304.310990-1-ria.thomas@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
