| Age | Commit message (Collapse) | Author |
|---|
|
The file_reader/on_open_expect_fault fails consistently on my system.
It expects a page fault on first dynptr read of some range the exe
file of the current process because it has paged out that page range
earlier. However a lot can happen to that range (which depending on
the actual memory layout could contain text section, data section,
sections )related to dynamic linking...) between the moment it was
paged out and the moment the bpf program expected to hit a pagefault
actually run.
A bit of instrumentation with mincore() shows that pages from that
range were accessed several times before the program is run. In
particular the call of file_reader__load() seems to fault all the
range in.
Move the call to madvise(MADV_PAGEOUT) to just before attaching the
program to minimize the risk of having those page pulled back in from
under our feet.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260420134637.2513867-1-jmarchan@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Cover all three sleepable tracepoint types (tp_btf.s, raw_tp.s, tp.s)
and sys_exit (via bpf_task_pt_regs) with functional tests using
bpf_copy_from_user() on getcwd. Verify alias and bare SEC variants,
bpf_prog_test_run_raw_tp() with BPF_F_TEST_RUN_ON_CPU rejection,
attach-time rejection on non-faultable tracepoints, and load-time
rejection for sleepable tp_btf on non-faultable tracepoints.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-6-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Add SEC_DEF entries for sleepable tracepoint variants:
- "tp_btf.s+" for sleepable BTF-based raw tracepoints
- "raw_tp.s+" for sleepable raw tracepoints
- "raw_tracepoint.s+" (alias)
- "tp.s+" for sleepable classic tracepoints
- "tracepoint.s+" (alias)
Extract sec_name_match_prefix() to share the prefix matching logic
between attach_tp() and attach_raw_tp(), eliminating duplicated
loops and hardcoded strcmp() checks for bare section names.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-5-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Add a bpf_tcp_ca selftest for the TCP_NODELAY restriction in
bpf-tcp-cc.
Update bpf_cubic to exercise init() and cwnd_event_tx_start(),
and check that both callbacks reject bpf_setsockopt(TCP_NODELAY)
with -EOPNOTSUPP.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260421155804.135786-5-kafai.wan@linux.dev
|
|
Add a sockops selftest for the TCP_NODELAY restriction in
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
With BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG enabled,
bpf_setsockopt(TCP_NODELAY) returns -EOPNOTSUPP from
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB, avoiding
unbounded recursion and kernel stack overflow.
Other cases continue to work as before, including
BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-4-kafai.wan@linux.dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
|
|
Since v2026.02.14
Display HT siblings in cpu# order.
Add Module-ID column.
Print Core-ID and APIC-ID in hex.
Fix misc bugs.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On large systems with HT sibling cpu#'s more than 32 apart,
HT siblings were processed and displayed in reverse order.
This was due to how set_thread_siblings() parsed the
sibling-bit-mask.
Update set_thread_siblings to instead parse the sibling-list,
like other cpu lists, and to thus order HT siblings
by ascending CPU number, no matter the size of the system.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Get the "module_id" from the Linux topology "cluster_id".
If the there is more than one id, show it by default.
Module joins Die etc. in the "topology" group.
Display in hex, as it is usually based mask of the APIC-id
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The core_id is based on a mask of the apic_id.
Print them both in hex, rather than decimal,
to make this relationship visibly clear.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Make printer helper functions more readable by factoring
out a local 'sep' variable.
Remove the redundant parentheses around sprintf() calls.
Remove an unnecessary cast to "unsigned int" by using the '%08llx' instead
of '%08x'.
No functional changes.
[lenb: fix typos, simplify]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When the "--cpu-set" option limits turbostat to run on
a higher numbered HT sibling, it exits upon dividing by zero.
This is because the HT support handles higher numbered siblings
at the same time as lower numbered siblings. But when that lower
number sibling is dis-allowed, the higher numbered sibling is
never processed. The result is a time delta of 0, which results
in a divide by 0 for any of the "per-second" metrics.
Enhance the HT enumeration code to record all siblings (up to SMT4).
Consult this complete HT sibling list to determine when
to process an HT sibling, and when to skip it.
Fixes: a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
"turbostat --cpu-set 0" appears to hang if cpu0 has an HT sibling.
This is because the initialization code recognizes that it does not
have to open perf files for the HT sibling, but the HT support
in the collection code sees the HT sibling and tries to read
from an uninitialized file descriptor, 0 (standard input).
Access HT siblings only when they are in the allowed set.
Fixes: a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The '-P' short option (shorthand for --no-perf) is not present in the
optstring of the second call to getopt_long_only(). This results in
the "unrecognized option" error when the tool reaches the main parsing
loop.
Add 'P' to the second getopt_long_only() call to ensure it is
consistently recognized.
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe bug fixes:
- Prevent re-registration
Add an earlier check to reject re-registering an already active
fprobe before its state is modified during the initialization phase
- Robustness in failure paths:
- Ensure fprobes are correctly removed from all internal tables
and properly RCU-freed during registration failure
- Make unregister_fprobe() proceed with unregistration even if
temporary memory allocation fails
- RCU safety in module unloading
Avoid a potential "sleep in RCU" warning by removing a kcalloc()
call in the module notifier path. This also tries to remove
fprobe_hash_node even if memory allocation fails.
- Type-aware unregistration
Fix a bug where unregistering an fprobe did not account for
different types (entry-only vs entry-exit) at the same address,
which previously left "junk" entries in the underlying
ftrace/fgraph ops
- Unregistration of empty ftrace_ops
Avoid unneeded performance overhead due to making registered
ftrace_ops empty - which means 'trace all functions'. This counts
remaining entries and unregister ftrace_ops when it becomes empty.
Two new selftests to check above fixes:
- Module Unloading Test:
Specifically verifies that fprobe events on a module are correctly
cleaned up and do not trigger 'trace-all' behavior when the module
is removed.
- Multiple Fprobe Events Test:
Ensure that having multiple fprobes on the same function correctly
manages the ftrace hash map during removal"
* tag 'probes-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add a testcase for multiple fprobe events
selftests/ftrace: Add a testcase for fprobe events on module
tracing/fprobe: Fix to unregister ftrace_ops if it is empty on module unloading
tracing/fprobe: Check the same type fprobe on table as the unregistered one
tracing/fprobe: Avoid kcalloc() in rcu_read_lock section
tracing/fprobe: Remove fprobe from hash in failure path
tracing/fprobe: Unregister fprobe even if memory allocation fails
tracing/fprobe: Reject registration of a registered fprobe before init
|
|
Add a testcase for multiple fprobe events on the same function
so that it clears ftrace hash map correctly when removing the
events.
Link: https://lore.kernel.org/all/177669370353.132053.16801520791509406141.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add a testcase for fprobe events on module, which unloads a kernel
module on which fprobe events are probing and ensure the ftrace
hash map is cleared correctly.
Link: https://lore.kernel.org/all/177669369564.132053.623527664540176496.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
The initial fix for this regression was incomplete, as it did not
handle multi-package systems with sparse core ids.
Fixes: ef0e60083f76 ("tools/power turbostat: Fix AMD RAPL regression")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull more crypto library updates from Eric Biggers:
"Crypto library fix and documentation update:
- Fix an integer underflow in the mpi library
- Improve the crypto library documentation"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: docs: Add rst documentation to Documentation/crypto/
docs: kdoc: Expand 'at_least' when creating parameter list
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
|
|
Pull to receive:
05909810a946 ("tools/sched_ext: scx_qmap: Silence task_ctx lookup miss")
which conflicts with the cid-form qmap rework on for-7.2. Resolved
by applying the same silence-on-NULL semantics to the arena-backed
lookup_task_ctx() and qmap_select_cpu() on for-7.2.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_fork() dispatches ops.init_task to exactly one scheduler - the one
owning the forking task's cgroup. A task forked inside a sub-scheduler's
cgroup is init'd into the sub only; the root scheduler has no task_ctx
entry for it. When that task later appears as @prev in the root's
qmap_dispatch() (or flows through core-sched comparison via task_qdist),
the bpf_task_storage_get() legitimately misses.
qmap treated those misses as fatal via scx_bpf_error("task_ctx lookup
failed") and aborted the scheduler as soon as the first cross-sched
task hit the root. Drop the error in the sites where the miss is
legitimate: lookup_task_ctx() (helper; callers already check for NULL),
qmap_dispatch()'s @prev branch (bookkeeping-only), task_qdist()
(returns 0 which makes the comparison a no-op), and qmap_select_cpu()
(returns prev_cpu as a no-op fallback instead of -ESRCH). The existing
scx_error was a paranoid guard from the pre-sub-sched world where every
task was owned by the one and only scheduler.
v2: qmap_select_cpu() returns prev_cpu on NULL instead of -ESRCH, so
the root scheduler doesn't error on cross-sched tasks that pass
through it (Andrea Righi).
Fixes: 4f8b122848db ("sched_ext: Add basic building blocks for nested sub-scheduler dispatching")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
|
|
Replace teamd daemon usage with ip link commands for team device
setup. teamd -d daemonizes and returns to the shell before port
addition completes, creating a race: the test may create the macvlan
(and check for its address on a slave) before teamd has finished
adding ports. This makes the test inherently dependent on scheduling
timing.
Using ip commands makes port addition synchronous, removing the race
and making the test deterministic.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-16-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test that exercises the ndo_change_rx_flags path through a
macvlan -> bridge -> team -> dummy stack. This triggers dev_uc_add
under addr_list_lock which flips promiscuity on the lower device.
With the new work queue approach, this must not deadlock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-15-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The nr_cpus variable is defined in scx_cpu0.bpf.c but never used in
the BPF logic. Remove both in BPF and userspace side.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix up a few cases where we assume vlen is 16 bits.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-6-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With extended kinds, 32 becomes a valid (but not used)
BTF info kind value; fix up the test to check for the
"Invalid kind" rather than "Invalid btf_info" message.
Since all bits are used in BTF info, it is no longer
possible to craft an invalid BTF info value. Use
127 (new maximum possible kind value).
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-5-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adjust btf_vlen() usage to handle 24-bit vlen.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-4-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that vlen is 24 bits, btf_vlen() must return a __u32.
Adjust use cases in libbpf accordingly. Also add error
handling to avoid vlen overflow in btf_type_inc_vlen().
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BTF maximum vlen is encoded using 16 bits with a maximum vlen
of 65535. This has sufficed for structs, function parameters
and enumerated type values. However, with upcoming BTF location
information - in particular information about inline sites -
this limit is surpassed. Use bits 16-23 - currently unused in
BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1),
or 16 million.
Also extend BTF kind encoding from 5 to 7 bits, giving a maximum
available number of kinds of 128. Since with the BTF location work
we use another 3 kinds, we are fast approaching the current limit
of 32.
Convert BTF_MAX_* values to enums to allow them to be encoded in
kernel BTF; this will allow us to detect if the running kernel
supports a 24-bit vlen or not. Add one for max _possible_
(not used) kind.
Fix up a few places in the kernel where a 16-bit vlen is assumed;
remove BTF_INFO_MASK as now all bits are used.
The vlen expansion was suggested by Andrii in [1]; the kind expansion
is tackled here too as it may be needed also to support new kinds
in BTF.
[1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix regressions in non-bash shells and busybox support, and revert a
commit that regressed in build and installation when one or more tests
fail to build.
Fix duplicated test number reporting introduced in ktap support patch"
* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix duplicated test number reporting
selftests: Fix runner.sh for non-bash shells
selftests: Fix runner.sh busybox support
selftests: Deescalate error reporting
|
|
Replace all variations of "paddr" variables in KVM selftests with "gpa",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_paddr_t to
gpa_t.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In x86's nested TDP APIs, use the appropriate gpa_t typedef and rename
variables from nested_paddr to l2_gpa to match KVM x86's nomenclature.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use gpa_t instead of u64 for obvious declarations of GPA variables.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all variations of "vaddr" variables in KVM selftests with "gva",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_vaddr_t to
gva_t.
Opportunistically use gva_t instead of u64 for relevant variables, and
fixup indentation as appropriate.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
guest PA
Rename inject_uer()'s @paddr to @hpa to make it more obvious that it
injects an error using a host PA, not a guest PA.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename arm64's translate_to_host_paddr() to translate_hva_to_hpa() and
update variable names to match, as using "vaddr" and "paddr" terminology
is super confusing due to selftests using those exact names for *guest*
addresses.
Opportunisitically drop superfluous local page_addr and paddr variables.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the helper
for populating the initial GVA bitmap to drop the defunct terminology and
use "vm" for the scope.
Opportunistically fixup the declaration of the API, which has been broken
since day 1. The flaw went unnoticed because the sole caller is defined
after the weak version, i.e. can see the prototype without a previous
declaration.
No functional change intended.
Fixes: e8b9a055fa04 ("KVM: arm64: selftests: Align VA space allocator with TTBR0")
Link: https://patch.msgid.link/20260420212004.3938325-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the API
for finding an unused range of virtual memory to drop the defunct
terminology and use "vm" for the scope.
Opportunistically clean up the function comment to drop superfluous
and redundant information.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, drop "vaddr_" from
the core memory allocation APIs as the information is extraneous and does
more harm than good. E.g. the APIs don't _just_ allocate virtual memory,
they allocate backing physical memory and install mappings in the guest
page tables. And as proven by kmalloc() and malloc(), developers generally
expect that allocations come with a working virtual address.
Opportunistically clean up the function comment for vm_alloc(), and drop
the misleading and superfluous comments for its wrappers.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use u8 instead of uint8_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint8_t/u8/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use s16 instead of int16_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int16_t/s16/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use u16 instead of uint16_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint16_t/u16/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use s32 instead of int32_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int32_t/s32/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use u32 instead of uint32_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint32_t/u32/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use s64 instead of int64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int64_t/s64/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use u64 instead of uint64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint64_t/u64/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
Include <linux/types.h> in include/kvm_util_types.h, iinclude/test_util.h,
and include/x86/pmu.h to pick up the tools-defined u64. Arguably, all
headers (especially kvm_util_types.h) should have already been including
stdint.h to get uint64_t from the libc headers, but the missing dependency
only rears its head once KVM uses u64 instead of uint64_t.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: rename pread_uint64() => pread_u64, expand on types.h include]
Link: https://patch.msgid.link/20260420212004.3938325-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fix various Hyper-V selftests to use gpa_t for variables that contain
guest physical addresses, rather than gva_t. In practice, the bugs are
benign as both gva_t and gpa_t are u64 typedefs, i.e. gpa_t and gva_t are
interchangeable from a functional perspective, the code is just confusing.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: call out that both are u64 typedefs]
Link: https://patch.msgid.link/20260420212004.3938325-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all occurrences of vm_paddr_t with gpa_t to align with KVM code
and with the conversion helpers (e.g. addr_hva2gpa()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_paddr_/gpa_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop bogus changelog blurb about renaming functions]
Link: https://patch.msgid.link/20260420212004.3938325-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all occurrences of vm_vaddr_t with gva_t to align with KVM code
and with the conversion helpers (e.g. addr_gva2hva()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_vaddr_/gva_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy, and
dropping renames of functions that allocate memory within a given VM.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop renames of allocator APIs]
Link: https://patch.msgid.link/20260420212004.3938325-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull to receive:
2d2b026c3ea7 ("sched_ext: Deny SCX kfuncs to non-SCX struct_ops programs")
which modifies scx_kfunc_context_filter() to avoid conflicts with planned
changes in for-7.2.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
