| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
|
|
Merge updates of Intel thermal drivers for 6.20/7.0:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake
platform (Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle THERMAL_TEMP_INVALID
that can be passed to it via sysfs as expected (Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
* thermal-intel:
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: intel: Use sysfs_emit() in a sysfs show function
thermal: intel: fix typo "nagative" in comment for cpu argument
thermal: intel: int340x: Use sysfs_emit{_at}() in sysfs show functions
thermal: intel: selftests: workload_hint: Support slow workload hints
thermal: int340x: processor_thermal: Enable slow workload type hints
thermal: intel: intel_pch_thermal: Drop explicit driver data clearing
thermal: intel: intel_tcc_cooling: Add CPU models in the support list
|
|
Preserve original relative order of anonymous or same-named
types to improve the consistency.
No functional changes.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260202120114.3707141-1-dolinux.peng@gmail.com
|
|
Add support for normalized CXL address translation through ACPI PRM method
to support AMD Zen5 platforms. Including a conventions doc that explains
how the translation is implemented and for future implementations that
need such setup to comply with the current implementation method.
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
|
|
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
|
|
Add AMD Zen5 support for address translation.
Zen5 systems may be configured to use 'Normalized addresses'. Then,
host physical addresses (HPA) are different from their system physical
addresses (SPA). The endpoint has its own physical address space and
an incoming HPA is already converted to the device's physical address
(DPA). Thus it has interleaving disabled and CXL endpoints are
programmed passthrough (DPA == HPA).
Host Physical Addresses (HPAs) need to be translated from the endpoint
to its CXL host bridge, esp. to identify the endpoint's root decoder
and region's address range. ACPI Platform Runtime Mechanism (PRM)
provides a handler to translate the DPA to its SPA. This is documented
in:
AMD Family 1Ah Models 00h–0Fh and Models 10h–1Fh
ACPI v6.5 Porting Guide, Publication # 58088
https://www.amd.com/en/search/documentation/hub.html
With Normalized Addressing this PRM handler must be used to translate
an HPA of an endpoint to its SPA.
Do the following to implement AMD Zen5 address translation:
Introduce a new file core/atl.c to handle ACPI PRM specific address
translation code. Naming is loosely related to the kernel's AMD
Address Translation Library (CONFIG_AMD_ATL) but implementation does
not depend on it, nor it is vendor specific. Use Kbuild and Kconfig
options respectively to enable the code depending on architecture and
platform options.
AMD Zen5 systems support the ACPI PRM CXL Address Translation firmware
call (see ACPI v6.5 Porting Guide, Address Translation - CXL DPA to
System Physical Address). Firmware enables the PRM handler if the
platform has address translation implemented. Check firmware and
kernel support of ACPI PRM using the specific GUID. On success enable
address translation by setting up the earlier introduced root port
callback, see function cxl_prm_setup_translation(). Setup is done in
cxl_setup_prm_address_translation(), it is the only function that
needs to be exported. For low level PRM firmware calls, use the ACPI
framework.
Identify the region's interleaving ways by inspecting the address
ranges. Also determine the interleaving granularity using the address
translation callback. Note that the position of the chunk from one
interleaving block to the next may vary and thus cannot be considered
constant. Address offsets larger than the interleaving block size
cannot be used to calculate the granularity. Thus, probe the
granularity using address translation for various HPAs in the same
interleaving block.
[ dj: Add atl.o build to cxl_test ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-11-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
This test allows to test the various storage key handling functions.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When using the TEST_HARNESS_MAIN macro definition to declare the main
function, it is required to use the EXPECT*() and ASSERT*() macros in
conjunction and not ksft_test_result_*(). Otherwise, even if a test item
fails, the test will still return a success result because
ksft_test_result_*() does not affect the test harness state.
Convert the code to use EXPECT/ASSERT() variants, which ensures that the
overall test result is fail if one of the EXPECT()s fails.
[ tglx: Massaged change log to explain _why_ ksft_test_result*() is the wrong
choice ]
Fixes: f341a20f6d7e ("selftests/futex: Refactor futex_requeue with kselftest_harness.h")
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/tencent_51851B741CC4B5EC9C22AFF70BA82BB60805@qq.com
|
|
We had a few patches in this area and no explicit coverage so far.
The test case covers the scenario addressed by the previous fix;
reusing the existing udpgro_fwd.sh script to leverage part of the
of the virtual network setup, even if such script is possibly not
a perfect fit.
Note that the mentioned script already contains several shellcheck
violation; this patch does not fix the existing code, just avoids
adding more issues in the new one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/768ca132af81e83856e34d3105b86c37e566a7ad.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to stress bpf_timer_start and map_delete race
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-10-alexei.starovoitov@gmail.com
|
|
Now bpf_timer can be used in tracepoints, so these tests are no longer
relevant.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-9-alexei.starovoitov@gmail.com
|
|
Add stress tests for BPF timers that run in NMI context using perf_event
programs attached to PERF_COUNT_HW_CPU_CYCLES.
The tests cover three scenarios:
- nmi_race: Tests concurrent timer start and async cancel operations
- nmi_update: Tests updating a map element (effectively deleting and
inserting new for array map) from within a timer callback
- nmi_cancel: Tests timer self-cancellation attempt.
A common test_common() helper is used to share timer setup logic across
all test modes.
The tests spawn multiple threads in a child process to generate
perf events, which trigger the BPF programs in NMI context. Hit counters
verify that the NMI code paths were actually exercised.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-8-alexei.starovoitov@gmail.com
|
|
Add test that verifies that bpf_timer_cancel_async works: can cancel
callback successfully.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-7-alexei.starovoitov@gmail.com
|
|
Extend BPF timer selftest to run stress test for async cancel.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-6-alexei.starovoitov@gmail.com
|
|
Refactor timer selftests, extracting stress test into a separate test.
This makes it easier to debug test failures and allows to extend.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-5-alexei.starovoitov@gmail.com
|
|
The machine can be calculated from a thread via its maps.
Don't require the machine argument to simplify callers and also to delay
computing the machine until a little later.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 64-bits of feature data to record the ELF machine and flags.
This allows readers to initialize based on the data.
For example, `perf kvm stat` wants to initialize based on the kind of
data to be read, but at initialization time there are no threads to base
this data upon and using the host means cross platform support won't
work.
The values in the perf_env also act as a cache for these within the
session.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow e_flags as well as e_machine to be computed using the e_machine
helper.
This isn't currently used, the argument is always NULL, but it will be
used for a new header feature.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pass the e_machine to the kvm functions so that they aren't just wired
to EM_HOST.
In the case of a session move some setup until the session
is created.
As the session isn't fully running the default EM_HOST is returned as no
e_machine can be found in a running machine.
This is, however, some marginal progress to cross platform support.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
`perf kvm stat` supports record and report options.
By using the arch directory a report for a different machine type cannot
be supported.
Move the kvm-stat code out of the arch directory and into
util/kvm-stat-arch following the pattern of perf-regs and dwarf-regs.
Avoid duplicate symbols by renaming functions to have the architecture
name within them.
For global variables, wrap them in an architecture specific function.
Selecting the architecture to use with `perf kvm stat` is selected by
EM_HOST, ie no different than before the change.
Later the ELF machine can be determined from the session or a header
feature (ie EM_HOST at the time of the record).
The build and #define HAVE_KVM_STAT_SUPPORT is now redundant so remove
across Makefiles and in the build.
Opportunistically constify architectural structs and arrays.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When building tools/perf the CFLAGS can contain a directory for the
installed headers.
As the headers may be being installed while building libperf.a this can
cause headers to be partially installed and found in the include path
while building an object file for libperf.a.
The installed header may reference other installed headers that are
missing given the partial nature of the install and then the build fails
with a missing header file.
Avoid this by ensuring the libperf source headers are always first in
the CFLAGS.
Fixes: 3143504918105156 ("libperf: Make libperf.a part of the perf build")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure the `perf kvm stat live -p ..` has some basic functionality.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quan Zhou <zhouquan@iscas.ac.cn>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a selftest to ensure BPF stream functions can now be called
while holding a lock.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftests for the new bpf_stream_print_stack kfunc.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test that two registers with their id=0 (unlinked) in the cached state
can be mapped to a single id (linked) in the current state.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-6-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If perf is built with LIBCAPSTONE_DLOPEN=1, support dlopen-ing
libcapstone.so and then calling the necessary functions by looking them
up using dlsym.
The types come from capstone.h which means the libcapstone feature check
needs to pass, and NO_CAPSTONE=1 hasn't been defined. This will cause
the definition of HAVE_LIBCAPSTONE_SUPPORT.
Earlier versions of this code tried to declare the necessary
capstone.h constants and structs, but they weren't stable and caused
breakages across libcapstone releases.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using libcap was removed in commit e25ebda78e230283 ("perf cap: Tidy up
and improve capability testing") and improve capability testing"),
however, some build documentation and a use of the NO_LIBCAP=1 were
lingering.
Remove these left over bits.
Fixes: e25ebda78e230283 ("perf cap: Tidy up and improve capability testing")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Linux Accurate ECN test sets using ACE counters and AccECN options to
cover several scenarios: Connection teardown, different ACK conditions,
counter wrapping, SACK space grabbing, fallback schemes, negotiation
retransmission/reorder/loss, AccECN option drop/loss, different
handshake reflectors, data with marking, and different sysctl values.
The packetdrill used is commit cbe405666c9c8698ac1e72f5e8ffc551216dfa56
of repo: https://github.com/minuscat/packetdrill/tree/upstream_accecn.
And corresponding patches are sent to google/packetdrill email list.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-16-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, GRO does not flush packets when the CWR bit is set.
A corresponding self-test is being added, in which the CWR flag
is set for two consecutive packets, but the first packet with the
CWR flag set will not be flushed immediately.
+===================+==========+===============+===========+
| Packet id | CWR flag | Payload | Flushing? |
+===================+==========+===============+===========+
| 0 | 0 | PAYLOAD_LEN | 0 |
| ... | 0 | PAYLOAD_LEN | 1 |
+-------------------+----------+---------------+-----------+
| NUM_PACKETS/2 - 1 | 1 | payload_len | 0 |
| NUM_PACKETS/2 | 1 | payload_len | 1 |
+-------------------+----------+---------------+-----------+
| ... | 0 | PAYLOAD_LEN | 0 |
| NUM_PACKETS | 0 | PAYLOAD_LEN | 1 |
+===================+==========+===============+===========+
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new kselftest to verify that the total_bw value in
/sys/kernel/debug/sched/debug remains consistent across all CPUs
under different sched_ext BPF program states:
1. Before a BPF scheduler is loaded
2. While a BPF scheduler is loaded and active
3. After a BPF scheduler is unloaded
The test runs CPU stress threads to ensure DL server bandwidth
values stabilize before checking consistency. This helps catch
potential issues with DL server bandwidth accounting during
sched_ext transitions.
Co-developed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-8-arighi@nvidia.com
|
|
Add a selftest to validate the correct behavior of the deadline server
for the ext_sched_class.
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-7-arighi@nvidia.com
|
|
Update to avoid conflicts with /urgent patches.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The "splice" alternate mode for mptcp_connect.sh/.c is available now,
this patch adds mptcp_connect_splice.sh to test it in the MPTCP CI by
default.
Note that this mode is also supported by stable kernel versions, but
optimised in this patch series.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-6-31332ba70d7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new 'splice' io mode for mptcp_connect to test
the newly added read_sock() and splice_read() functions of MPTCP.
do_splice() efficiently transfers data directly between two file
descriptors (infd and outfd) without copying to userspace, using
Linux's splice() system call.
Usage:
./mptcp_connect.sh -m splice
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-5-31332ba70d7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the default (non-JSON) output more compact. Looking at RSS
context dumps is pretty much impossible without this, because
default print shows the indirection table with line per entry:
'indir': [0,
1,
2,
...
And indirection tables have 100-200 entries each.
The compact output is far more readable:
'indir': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260131203029.1173492-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test which checks that the RSS table is at least 4x the max
queue count supported by the device. The original RSS spec from
Microsoft stated that the RSS indirection table should be 2 to 8
times the CPU count, presumably assuming queue per CPU. If the
CPU count is not a power of two, however, a power-of-2 table
2x larger than queue count results in a 33% traffic imbalance.
Validate that the indirection table is at least 4x the queue
count. This lowers the imbalance to 16% which empirically
appears to be more acceptable to memcache-like workloads.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260131225454.1225151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The init_enable_count test is flaky. The test forks 1024 children before
attaching the scheduler to verify that existing tasks get ops.init_task()
called. The children were using sleep(1) before exiting.
7900aa699c34 ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free()
to finish_task_switch()") changed when tasks are removed from scx_tasks -
previously when the task_struct was freed, now immediately in
finish_task_switch() when the task dies.
Before the commit, pre-forked children would linger on scx_tasks until freed
regardless of when they exited, so the scheduler would always see them during
iteration. The sleep(1) was unnecessary. After the commit, children are
removed as soon as they die. The sleep(1) masks the problem in most cases but
the test becomes flaky depending on timing.
Fix by synchronizing properly using a pipe. All children block on read() and
the parent signals them to exit by closing the write end after attaching the
scheduler. The children are auto-reaped so there's no need to wait on them.
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Changwoo Min <changwoo@igalia.com>
Cc: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Besides the parameters that are passed via command line arguments,
the wrapper's behavior is affected by several environment variables.
Document that. While here, use __doc__ for its description.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <e0ccee75f7e7fb499e0f59d5b84469f4b6a21627.1769500383.git.mchehab+huawei@kernel.org>
|
|
Documentation builds were using "-q" for a long time, but sometimes
it is nice to see the Sphinx progress, without increasing build
verbosity - which would also turn on kernel-doc verbosity.
Instead of doing that, let's parse the sphinx-build already-existing
-v: each time it is used, it increases the verbosity level.
With that, if the default is to use -q, a single -v will disable
quiet mode. Passing more -v will keep increasing its verbosity.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <38b24e97a3cbd2def418359a8e69b1b087a945ad.1769500383.git.mchehab+huawei@kernel.org>
|
|
the "\1" inside a docstring requires proper scaping to not be
considered a hex character and break the build.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-doc/63e99049-cc72-4156-83af-414fdde34312@gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <2fff8ef1d0d64e8b68f15f5c07613f302d773855.1769500383.git.mchehab+huawei@kernel.org>
|
|
Fixup and refactor downstream port enumeration to prepare for CXL port
protocol error handling. Main motivation is to move endpoint
component register mapping to a port object.
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
cxl/port: Move dport probe operations to a driver event
cxl/port: Move decoder setup before dport creation
cxl/port: Cleanup dport removal with a devres group
cxl/port: Reduce number of @dport variables in cxl_port_add_dport()
cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition
|
|
Fix a pointer arithmetic error in scx_sdt during freeing that
causes the allocator to use the wrong memory address for the
allocation's data header.
Fixes: 36929ebd17ae ("tools/sched_ext: add arena based scheduler")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Towards the end goal of making all CXL RAS capability handling uniform
across host bridge ports, upstream switch ports, and endpoint ports, move
dport RAS setup. Move it to cxl_switch_port_probe() context for switch / VH
dports (via cxl_port_add_dport()) and cxl_endpoint_port_probe() context for
an RCH dport. Rename the RAS setup helper to devm_cxl_dport_ras_setup() for
symmetry with devm_cxl_switch_port_decoders_setup().
Only the RCH version needs to be exported and the cxl_test mocking can be
deleted with a dev_is_pci() check on the dport_dev.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-7-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for adding more register setup to the cxl_port_add_dport()
path (for RAS register mapping), move the dport creation event to a driver
callback. This achieves two goals, it puts driver operations logically
where they belong, in a driver, and it obviates the gymnastics of
DECLARE_TESTABLE() which just makes a mess of grepping for CXL symbols.
In other words, a driver callback is less of an ongoing maintenance burden
than this DECLARE_TESTABLE arrangement that does not scale and diminishes
the grep-ability of the codebase.
cxl_port_add_dport() moves mostly unmodified from drivers/cxl/core/port.c.
The only deliberate change is that it now assumes that the device_lock is
held on entry and the driver is attached (just like cxl_port_probe()).
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-6-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
- Fix a build error on ia32-x86_64 cross builds
- Replace locally open coded ALIGN_UP(), ALIGN_UP_POW2()
and MAX(), which, beyond being duplicates, the
ALIGN_UP_POW2() is also buggy
- Fix objtool klp-diff regression caused by a recent
change to the bug table format
- Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL build
failure
* tag 'objtool-urgent-2026-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
livepatch/klp-build: Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL
objtool/klp: Fix bug table handling for __WARN_printf()
objtool: Replace custom macros in elf.c with shared ones
objtool: Print bfd_vma as unsigned long long on ia32-x86_64 cross build
|
|
schedulers
Add scx_bpf_error() calls when scx_bpf_create_dsq() fails in the remaining
schedulers to improve debuggability:
- scx_simple.bpf.c: simple_init()
- scx_sdt.bpf.c: sdt_init()
- scx_cpu0.bpf.c: cpu0_init()
- scx_flatcg.bpf.c: fcg_init()
This follows the same pattern established in commit 2f8d489897ae
("sched_ext: Add error logging for dsq creation failures") for other
schedulers and ensures consistent error reporting across all schedulers.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Problem
=======
Commit 658eb5ab916d ("delayacct: add delay max to record delay peak")
introduced the delay max for getdelays, which records abnormal latency
peaks and helps us understand the magnitude of such delays. However, the
peak latency value alone is insufficient for effective root cause
analysis. Without the precise timestamp of when the peak occurred, we
still lack the critical context needed to correlate it with other system
events.
Solution
========
To address this, we need to additionally record a precise timestamp when
the maximum latency occurs. By correlating this timestamp with system
logs and monitoring metrics, we can identify processes with abnormal
resource usage at the same moment, which can help us to pinpoint root
causes.
Use Case
========
bash-4.4# ./getdelays -d -t 227
print delayacct stats ON
TGID 227
CPU count real total virtual total delay total delay average delay max delay min delay max timestamp
46 188000000 192348334 4098012 0.089ms 0.429260ms 0.051205ms 2026-01-15T15:06:58
IO count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
SWAP count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
RECLAIM count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
THRAS HING count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
COMPACT count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
WPCOPY count delay total delay average delay max delay min delay max timestamp
182 19413338 0.107ms 0.547353ms 0.022462ms 2026-01-15T15:05:24
IRQ count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
Link: https://lkml.kernel.org/r/20260119100241520gWubW8-5QfhSf9gjqcc_E@zte.com.cn
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At present the mm selftests are integrated into the kselftest harness by
having it run run_vmtest.sh and letting it pick it's default set of tests
to invoke, rather than by telling the kselftest framework about each test
program individually as is more standard. This has some unfortunate
interactions with the kselftest harness:
- If any of the tests hangs the harness will kill the entire mm
selftests run rather than just the individual test, meaning no
further tests get run.
- The timeout applied by the harness is applied to the whole run rather
than an individual test which frequently leads to the suite not being
completed in production testing.
Deploy a crude but effective mitigation for these issues by telling the
kselftest framework to run each of the test categories that run_vmtests.sh
has separately. Since kselftest really wants to run test programs this is
done by providing a trivial wrapper script for each categorty that invokes
run_vmtest.sh, this is not a thing of great elegence but it is clear and
simple. Since run_vmtests.sh is doing runtime support detection, scenario
enumeration and setup for many of the tests we can't consistently tell the
framework about the individual test programs.
This has the side effect of reordering the tests, hopefully the testing
is not overly sensitive to this.
Link: https://lkml.kernel.org/r/20260123-selftests-mm-run-suites-separately-v2-1-3e934edacbfa@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the test fails, it shows whole sampled working set size measurements.
The purpose is showing the distribution of the measured values, to let
the tester know if it was just intermittent failure. Multiple same values
on the output are therefore unnecessary. It was not a big deal since the
test was failing only once in the past. But the test can now fail
multiple times with increased working set size, until it passes or the
working set size reaches a limit. Hence the noisy output can be quite
long and annoying. Print only the deduplicated distribution information.
Link: https://lkml.kernel.org/r/20260117020731.226785-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
