| Age | Commit message (Collapse) | Author |
|---|
|
DAMON selftest for working set size estimation collects DAMON's working
set size measurements of the running artificial memory access generator
program until the program is finished. Depending on how quickly the
program finishes, and how quickly DAMON starts, the number of collected
working set size measurements may vary, and make the test results
unreliable. Ensure it collects 40 measurements by using the repeat mode
of the artificial memory access generator program, and finish the
measurements only after the desired number of collections are made.
Link: https://lkml.kernel.org/r/20260117020731.226785-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'access_memory' is an artificial memory access generator program that is
used for a few DAMON selftests. It accesses a given number of regions one
by one only once, and exits. Depending on systems, the test workload may
exit faster than expected, making the tests unreliable. For reliable
control of the artificial memory access pattern, add a mode to make it
repeat running.
Link: https://lkml.kernel.org/r/20260117020731.226785-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON reads and writes Accessed bits of page tables without manual TLB
flush for two reasons. First, it minimizes the overhead. Second, real
systems that need DAMON are expected to be memory intensive enough to
cause periodic TLB flushes. For test setups that use small test
workloads, however, the system's TLB could be big enough to cover whole or
most accesses of the test workload. In this case, no page table walk
happens and DAMON cannot show any access from the test workload.
The test workload for DAMON's working set size estimation selftest is such
a case. It accesses only 10 MiB working set, and it turned out there are
test setups that have TLBs large enough to cover the 10 MiB data accesses.
As a result, the test fails depending on the test machine.
Make it more reliable by trying larger working sets up to 160 MiB when it
fails.
Link: https://lkml.kernel.org/r/20260117020731.226785-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: improve leak detection and wss estimation
reliability".
Two DAMON selftets, namely 'sysfs_memcg_leak' and
'sysfs_update_schemes_tried_regions_wss_estimation' frequently show
intermittent failures due to their unreliable leak detection and working
set size estimation. Make those more reliable.
This patch (of 5):
sysfs_memcg_path_leak.sh determines if the memory leak has happened by
seeing if Slab size on /proc/meminfo increases more than expected after an
action. Depending on the system and background workloads, the reasonable
expectation varies. For the reason, the test frequently shows
intermittent failures. Use kmemleak, which is much more reliable and
correct, instead.
Link: https://lkml.kernel.org/r/20260117020731.226785-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260117020731.226785-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This self test is asserting internal implementation details and is highly
vulnerable to internal kernel changes as a result.
It is currently failing locally from at least v6.17, and it seems that it
may have been failing for longer in many configurations/hardware as it
skips if e.g. CONFIG_ANON_VMA_NAME is not specified.
With these skips and the fact that run_vmtests.sh won't run the tests in
certain configurations it is likely we have simply missed this test being
broken in CI for a long while.
I have tried multiple versions of these tests and am unable to find a
working bisect as previous versions of the test fail also.
The tests are essentially mmap()'ing a series of mappings with no hint and
asserting what the get_unmapped_area*() functions will come up with, with
seemingly few checks for what other mappings may already be in place.
It then appears to be mmap()'ing with a hint, and making a series of
similar assertions about the internal implementation details of the
hinting logic.
Commit 0ef3783d7558 ("selftests/mm: add support to test 4PB VA on PPC64"),
commit 3bd6137220bb ("selftests/mm: virtual_address_range: avoid reading
from VM_IO mappings"), and especially commit a005145b9c96 ("selftests/mm:
virtual_address_range: mmap() without PROT_WRITE") are good examples of
the whack-a-mole nature of maintaining this test.
The last commit there being particularly pertinent as it was accounting
for an internal implementation detail change that really should have no
bearing on self-tests, that is commit e93d2521b27f ("x86/vdso: Split
virtual clock pages into dedicated mapping").
The purpose of the mm self-tests are to assert attributes about the API
exposed to users, and to ensure that expectations are met.
This test is emphatically not doing this, rather making a series of
assumptions about internal implementation details and asserting them.
It therefore, sadly, seems that the best course is to remove this test
altogether.
Link: https://lkml.kernel.org/r/20260116132053.857887-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pfnmap currently checks the target file in FIXTURE_SETUP(pfnmap), meaning
once for every test, and skips the test if any check fails.
The target file is the same for every test so this is a little overkill.
More importantly, this approach means that the whole suite will report
PASS even if all the tests are skipped because kernel configuration (e.g.
CONFIG_STRICT_DEVMEM=y) prevented /dev/mem from being mapped, for
instance.
Let's ensure that KSFT_SKIP is returned as exit code if any check fails by
performing the checks in pfnmap_init(), run once. That function also
takes care of finding the offset of the pages to be mapped and saves it in
a global. The file is now opened only once and the fd saved in a global,
but it is still mapped/unmapped for every test, as some of them modify the
mapping.
Link: https://lkml.kernel.org/r/20260122170224.4056513-10-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make sure pagemap_ioctl exits with an appropriate value:
* If the tests are run, call ksft_finished() to report the right
status instead of reporting PASS unconditionally.
* Report SKIP if userfaultfd isn't available (in line with other
tests)
* Report FAIL if we failed to open /proc/self/pagemap, as this file
has been added a long time ago and doesn't depend on any CONFIG
option (returning -EINVAL from main() is meaningless)
Link: https://lkml.kernel.org/r/20260122170224.4056513-9-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
One of the pagemap_ioctl tests attempts to fault in pages by memcpy()'ing
them to an unused buffer. This probably worked originally, but since
commit 46036188ea1f ("selftests/mm: build with -O2") the compiler is free
to optimise away that unused buffer and the memcpy() with it. As a result
there might not be any resident page in the mapping and the test may fail.
We don't need to copy all that memory anyway. Just fault in every page.
While at it also make sure to compute the number of pages once using
simple integer arithmetic instead of ceilf() and implicit conversions.
Link: https://lkml.kernel.org/r/20260122170224.4056513-8-kevin.brodsky@arm.com
Fixes: 46036188ea1f ("selftests/mm: build with -O2")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
FORCE_READ(*addr) ensures that the compiler will emit a load from addr.
Several tests need to trigger such a load for a range of pages, ensuring
that every page is faulted in, if it wasn't already.
Introduce a new helper force_read_pages() that does exactly that and
replace existing loops with a call to it.
The step size (regular/huge page size) is preserved for all loops, except
in split_huge_page_test. Reading every byte is unnecessary; we now read
every huge page, matching the following call to check_huge_file().
Link: https://lkml.kernel.org/r/20260122170224.4056513-7-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Many cow tests rely on FORCE_READ() to populate pages. Introduce a helper
to make sure that the pages are actually populated, and fail otherwise.
Link: https://lkml.kernel.org/r/20260122170224.4056513-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 5bbc2b785e63 ("selftests/mm: fix FORCE_READ to read input value
correctly") modified FORCE_READ() to take a value instead of a pointer.
It also changed most of the call sites accordingly, but missed many of
them in cow.c. In those cases, we ended up with the pointer itself being
read, not the memory it points to.
No failure occurred as a result, so it looks like the tests work just fine
without faulting in. However, the huge_zeropage tests explicitly check
that pages are populated, so those became skipped.
Convert all the remaining FORCE_READ() to fault in the mapped page, as was
originally intended. This allows the huge_zeropage tests to run again (3
tests in total).
Link: https://lkml.kernel.org/r/20260122170224.4056513-5-kevin.brodsky@arm.com
Fixes: 5bbc2b785e63 ("selftests/mm: fix FORCE_READ to read input value correctly")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
check_config.sh checks that liburing is available by running the compiler
provided as its first argument. This makes two assumptions:
1. CC consists of only one word
2. No extra flag is required
Unfortunately, there are many situations where these assumptions don't
hold. For instance:
- When using Clang, CC consists of multiple words
- When cross-compiling, extra flags may be required to allow the
compiler to find headers
Remove these assumptions by passing down CC and CFLAGS as-is from the
Makefile, so that the same command line is used as when actually building
the tests.
Link: https://lkml.kernel.org/r/20260122170224.4056513-4-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 96ed62ea0298 ("mm: page_frag: fix a compile error when kernel is
not compiled") introduced a check to avoid attempting to build the
page_frag module if <linux/page_frag_cache.h> is missing.
Unfortunately this check only works if KDIR points to /lib/modules/... or
an in-tree kernel build. It always fails if KDIR points to an out-of-tree
build (i.e. when the kernel was built with O=... make) because only
generated headers are present under $KDIR/include/ in that case.
A recent commit switched KDIR to default to the kernel's build directory,
so that check is no longer justified.
Link: https://lkml.kernel.org/r/20260122170224.4056513-3-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: wang lian <lianux.mm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Various mm kselftests improvements/fixes", v3.
Various improvements/fixes for the mm kselftests:
- Patch 1-3 extend support for more build configurations: out-of-tree
$KDIR, cross-compilation, etc.
- Patch 4-7 fix issues related to faulting in pages, introducing a new
helper for that purpose.
- Patch 8 fixes the value returned by pagemap_ioctl (PASS was always
returned, which explains why the issue fixed in patch 6 went
unnoticed).
- Patch 9 improves the exit code of pfnmap.
Net results:
- 1 test no longer fails (patch 7)
- 3 tests are no longer skipped (patch 4)
- More accurate return values for whole suites (patch 8, 9)
- Extra tests are more likely to be built (patch 1-3)
This patch (of 9):
KDIR currently defaults to the running kernel's modules directory when
building the page_frag module. The underlying assumption is that most
users build the kselftests in order to run them against the system they're
built on.
This assumption seems questionable, and there is no guarantee that the
module can actually be built against the running kernel.
Switch the default value of KDIR to the kernel's build directory, i.e.
$(O) if O= or KBUILD_OUTPUT= is used, and the source directory otherwise.
This seems like the least surprising option: the test module is built
against the kernel that has been previously built.
Note: we can't use $(top_srcdir) in mm/Makefile because it is only defined
once lib.mk is included.
Link: https://lkml.kernel.org/r/20260122170224.4056513-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20260122170224.4056513-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove test_generic_01.sh since block layer may reorder I/O, making
the test prone to false positives. Apply the improvements to
test_generic_02.sh instead, which supposes for covering ublk dispatch
io order.
Rework test_generic_02 to verify that ublk dispatch doesn't reorder I/O
by comparing request start order with completion order using bpftrace.
The bpftrace script now:
- Tracks each request's start sequence number in a map keyed by sector
- On completion, verifies the request's start order matches expected
completion order
- Reports any out-of-order completions detected
The test script:
- Wait bpftrace BEGIN code block is run
- Pins fio to CPU 0 for deterministic behavior
- Uses block_io_start and block_rq_complete tracepoints
- Checks bpftrace output for reordering errors
Reported-and-tested-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move integrity-focused tests into new 'integrity' group:
- test_null_04.sh -> test_integrity_01.sh
- test_loop_08.sh -> test_integrity_02.sh
Move recovery-focused tests into new 'recover' group:
- test_generic_04.sh -> test_recover_01.sh
- test_generic_05.sh -> test_recover_02.sh
- test_generic_11.sh -> test_recover_03.sh
- test_generic_14.sh -> test_recover_04.sh
Update Makefile to reflect the reorganization.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When running tests in parallel with high JOBS count (e.g., JOBS=64),
the existing timeouts can be insufficient due to system load:
- Increase state wait loops from 20/50 to 100 iterations in
_recover_ublk_dev(), __ublk_quiesce_dev(), and __ublk_kill_daemon()
to handle slower state transitions under heavy load
- Add --timeout=20 to udevadm settle calls to prevent indefinite
hangs when udev event queue is overwhelmed by rapid device
creation/deletion
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add _ublk_sleep() helper function that uses different sleep times
depending on whether tests run in parallel or sequential mode.
Usage: _ublk_sleep <normal_secs> <parallel_secs>
Export JOBS variable from Makefile so test scripts can detect parallel
execution, and use _ublk_sleep in test_part_02.sh to handle the
partition scan delay (1s normal, 5s parallel).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add convenient Makefile targets for running specific test groups:
- run_generic, run_batch, run_null, run_loop, run_stripe, run_stress, etc.
- run_all for running all tests
Test groups are auto-detected from TEST_PROGS using pattern matching
(test_<group>_<num>.sh -> group), and targets are generated dynamically
using define/eval templates.
Supports parallel execution via JOBS variable:
- JOBS=1 (default): sequential with kselftest TAP output
- JOBS>1: parallel execution with xargs -P
Usage examples:
make run_null # Sequential execution
make run_stress JOBS=4 # Parallel with 4 jobs
make run_all JOBS=8 # Run all tests with 8 parallel jobs
With JOBS=8, running time of `make run_all` is reduced to 2m2s from 6m5s
in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Track device IDs in UBLK_DEVS array when created. Update
_cleanup_test() to only delete devices created by this test
instead of using 'del -a' which removes all devices.
This prepares for running tests concurrently where each test
should only clean up its own devices.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add _ublk_del_dev() to delete a specific ublk device by ID and
use it in all test scripts instead of calling UBLK_PROG directly.
Also remove unused _remove_ublk_devices() function.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Encapsulate each test case in its own function for better organization
and maintainability:
- _setup_device(): device and backfile initialization
- _test_fill_and_verify(): initial data population
- _test_corrupted_reftag(): reftag corruption detection test
- _test_corrupted_data(): data corruption detection test
- _test_bad_apptag(): apptag mismatch detection test
Also fix temp file creation to use ${UBLK_TEST_DIR}/fio_err_XXXXX instead of
creating in current directory.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove intermediate TDIR variable and set UBLK_TEST_DIR directly
in _prep_test(). Remove default initialization since the directory
is created dynamically when tests run.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow get_func_args, and get_func_ip fsession selftests to run on arm64.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c44658f ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This new test simply checks that helper bpf_xdp_store_bytes can
successfully read from a read-only map.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/4fdb934a713b2d7cf133288c77f6cfefe9856440.1769875479.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Create and use a temporary directory for the files created during
test runs. If TMPDIR environment variable is set use it as a base
for the temporary directory path.
TMPDIR=/mnt/scratch make run_tests
and
TMPDIR=/mnt/scratch ./test_generic_01.sh
will place test directory under /mnt/scratch
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Log test start and end time in dmesg, so generated log messages
during the test run can be linked to specific test from the test
suite.
(switch to `date +%F %T`)
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The null target doesn't handle IO, so disable partition scan to avoid IO
failures caused by integrity verification during the kernel's partition
table read.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Encapsulate each test case in its own function that creates the
device, runs checks, and deletes only that device. This avoids
calling _cleanup_test multiple times.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This test exercises partition scanning behavior, so move it to
the test_part_* group for consistency.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test_part_01.sh to test the UBLK_F_NO_AUTO_PART_SCAN feature
flag which allows suppressing automatic partition scanning during
device startup while still allowing manual partition probing.
The test verifies:
- Normal behavior: partitions are auto-detected without the flag
- With flag: partitions are not auto-detected during START_DEV
- Manual scan: blockdev --rereadpt works with the flag
Also update kublk tool to support --no_auto_part_scan option and
recognize the feature flag.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add automatic TID derivation in test_common.sh based on the script
filename. The TID is extracted by stripping the "test_" prefix and
".sh" suffix from the script name (e.g., test_loop_01.sh -> loop_01).
This removes the need for each test script to manually define TID,
reducing boilerplate and preventing potential mismatches between
the script name and TID. Scripts can still override TID after
sourcing test_common.sh if needed.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder
- Fix off-by-one line number in 'rustdoc' KUnit tests
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'
- Clean objtool warning by adding one more 'noreturn' function
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'
'kernel' crate:
- Fix build error when using expressions in formatting arguments
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly
- Always inline functions using 'build_assert' with arguments
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host
'macros' crate:
- Fix 'rusttest' build error by ignoring example
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'
Plus clean a few typos in docs and comments"
* tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (28 commits)
rust: num: bounded: clean __new documentation and comments
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
drm/tyr: depend on `COMMON_CLK` to fix build error
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
kbuild: rust: clean libpin_init_internal in mrproper
rust: proc-macro2: rebuild if the version text changes
rust: num: bounded: add missing comment for always inlined function
rust: sync: refcount: always inline functions using build_assert with arguments
rust: bits: always inline functions using build_assert with arguments
scripts: generate_rust_analyzer: compile sysroot with correct edition
scripts: generate_rust_analyzer: compile quote with correct edition
scripts: generate_rust_analyzer: quote: treat `core` and `std` as dependencies
scripts: generate_rust_analyzer: syn: treat `std` as a dependency
scripts: generate_rust_analyzer: remove sysroot assertion
rust: kbuild: give `--config-path` to `rustfmt` in `.rsi` target
scripts: generate_rust_analyzer: Add pin_init_internal deps
scripts: generate_rust_analyzer: Add pin_init -> compiler_builtins dep
scripts: generate_rust_analyzer: Add compiler_builtins -> core dep
rust: macros: ignore example with module parameters
rust: num: bounded: mark __new as unsafe
...
|
|
Adding support to call bpf_get_stackid helper from trigger programs,
so far added for kprobe multi.
Adding the --stacktrace/-g option to enable it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-7-jolsa@kernel.org
|
|
Adding test that attaches fentry/fexitand verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-6-jolsa@kernel.org
|
|
Adding test that attaches kprobe/kretprobe and verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-5-jolsa@kernel.org
|
|
We now include the attached function in the stack trace,
fixing the test accordingly.
Fixes: c9e208fa93cd ("selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-4-jolsa@kernel.org
|
|
Recent x86 kernels export __preempt_count as a ksym, while some old kernels
between v6.1 and v6.14 expose the preemption counter via
pcpu_hot.preempt_count. The existing selftest helper unconditionally
dereferenced __preempt_count, which breaks BPF program loading on such old
kernels.
Make the x86 preemption count lookup version-agnostic by:
- Marking __preempt_count and pcpu_hot as weak ksyms.
- Introducing a BTF-described pcpu_hot___local layout with
preserve_access_index.
- Selecting the appropriate access path at runtime using ksym availability
and bpf_ksym_exists() and bpf_core_field_exists().
This allows a single BPF binary to run correctly across kernel versions
(e.g., v6.18 vs. v6.13) without relying on compile-time version checks.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260130021843.154885-1-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding test that makes sure we can't mix sleepable and non-sleepable
bpf programs in the BPF_MAP_TYPE_PROG_ARRAY map and that we can do
tail call in the sleepable program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260130081208.1130204-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test_rss_flow_label_6only test case fails on devices that do not
support IPv6 flow label hashing. Make it skip neatly, consistent with
the behavior of the test_rss_flow_label case.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260128090217.663366-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add BAR_SUBRANGE_TEST to the pci_endpoint kselftest suite.
The test uses the PCITEST_BAR_SUBRANGE ioctl and will skip when the
chosen BAR is disabled (-ENODATA), when the endpoint/controller does not
support subrange mapping (-EOPNOTSUPP), or when the BAR is reserved for
the test register space (-EBUSY).
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-9-den@valinux.co.jp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, CAN and wireless.
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth:
- sfc: fix deadlock in RSS config read
- ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth:
- bonding: fix use-after-free due to enslave fail
- mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect"
* tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: fix segmentation of forwarding fraglist GRO
wifi: mac80211: correctly decode TTLM with default link map
selftests: mptcp: join: fix local endp not being tracked
selftests: mptcp: check subflow errors in close events
mptcp: only reset subflow errors when propagated
selftests: mptcp: check no dup close events after error
mptcp: avoid dup SUB_CLOSED events after disconnect
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
net/mlx5: Fix vhca_id access call trace use before alloc
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
net: phy: micrel: fix clk warning when removing the driver
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
net: bridge: fix static key check
nfc: nci: Fix race between rfkill and nci_unregister_device().
gve: fix probe failure if clock read fails
net/mlx5e: Account for netdev stats in ndo_get_stats64
net/mlx5e: TC, delete flows only for existing peers
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
...
|
|
XDR specification files can contain lines prefixed with '%' that
pass through unchanged to generated output. Traditional rpcgen
removes the '%' and emits the remainder verbatim, allowing direct
insertion of C includes, pragma directives, or other language-
specific content into the generated code.
Until now, xdrgen silently discarded these lines during parsing.
This prevented specifications from including necessary headers or
preprocessor directives that might be required for the generated
code to compile correctly.
The grammar now captures pass-through lines instead of ignoring
them. A new AST node type represents pass-through content, and
the AST transformer strips the leading '%' character. Definition
and source generators emit pass-through content in document order,
preserving the original placement within the specification.
This brings xdrgen closer to feature parity with traditional
rpcgen while maintaining the existing document-order processing
model.
Existing generated xdrgen source code has been regenerated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a kselftest for RISC-V control flow integrity implementation for
user mode. There is not a lot going on in the kernel to enable landing
pad for user mode. CFI selftests are intended to be compiled with a
zicfilp and zicfiss enabled compiler. This kselftest simply checks if
landing pads and shadow stacks for the process are enabled or not and
executes ptrace selftests on CFI. The selftest then registers a
SIGSEGV signal handler. Any control flow violations are reported as
SIGSEGV with si_code = SEGV_CPERR. The test will fail on receiving
any SEGV_CPERR. The shadow stack part has more changes in the kernel,
and thus there are separate tests for that.
- Exercise 'map_shadow_stack' syscall
- 'fork' test to make sure COW works for shadow stack pages
- gup tests
Kernel uses FOLL_FORCE when access happens to memory via
/proc/<pid>/mem. Not breaking that for shadow stack.
- signal test. Make sure signal delivery results in token creation on
shadow stack and consumes (and verifies) token on sigreturn
- shadow stack protection test. attempts to write using regular store
instruction on shadow stack memory must result in access faults
- ptrace test: adds landing pad violation, clears ELP and continues
In case the toolchain doesn't support the CFI extension, the CFI
kselftest won't be built.
Test output
===========
"""
TAP version 13
1..5
This is to ensure shadow stack is indeed enabled and working
This is to ensure shadow stack is indeed enabled and working
ok 1 shstk fork test
ok 2 map shadow stack syscall
ok 3 shadow stack gup tests
ok 4 shadow stack signal tests
ok 5 memory protections of shadow stack memory
"""
Suggested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-28-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated to apply; cleaned up patch description, code comments]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
We've run out of bits to describe RISC-V ISA extensions in our initial
hwprobe key, RISCV_HWPROBE_KEY_IMA_EXT_0. So, let's add
RISCV_HWPROBE_KEY_IMA_EXT_1, along with the framework to set the
appropriate hwprobe tuple, and add testing for it.
Based on a suggestion from Andrew Jones <andrew.jones@oss.qualcomm.com>,
also fix the documentation for RISCV_HWPROBE_KEY_IMA_EXT_0.
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Similar to IPIP, introduce specific selftest for IP6IP6 flowtable SW
acceleration in nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
