| Age | Commit message (Collapse) | Author |
|---|
|
Rather than have 2 Dwfl unify the Dwfl in skip-callchain-idx with that
is used by libdw__addr2line().
Rename that variable in 'struct dso' from 'a2l_libdw' to just 'libdw' as
it is now used in more than addr2line.
The Dwfl in skip-callchain-idx uses a map address when being read with
dwfl_report_elf (rather than dwfl_report_offline that addr2line
uses).
skip-callchain-idx is wrong as the map address can vary between
processes because of ASLR, ie it should need a different Dwfl per
process.
In the code after this patch the base address becomes 0 and the mapped
PC is used with the dwfl functions.
This should increase the accuracy of skip-callchain-idx, but the impact
has only been build tested.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Argument is a pointer but EM_NONE (0) was being passed. Correct by
passing NULL.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some irregular stack traces are causing double frees and memory
leaks. Make the code robust by proactively freeing and being more
careful with the memory management of the leaf_srcline.
Fixes: 88c51002d06f9a68 ("perf addr2line: Add a libdw implementation")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The set_initial_registers field of Dwfl_Thread_Callbacks needs to be set
according to the arch of the stack samples being analyzed, not the arch
that perf itself is built for.
Currently perf fails to unwind stack samples collected from archs
different from that of the host perf is running on.
This patch moves the arch-specific implementations of set_initial_registers
from tools/perf/arch to tools/perf/utli/unwind-libdw-arch, similar to the
way the perf-regs-arch folder contains arch-specific functions related to
registers, and chooses the implementation based on the arch of the data
being processed.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Shimin Guo <shimin.guo@skydio.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Marking DSOs doesn't need inline frames traversing as the inline
frames are all part of the same DSO. Disable to improve performance
and also to avoid potential issues with dwarf information.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Better ensure a read e_machine is valid by checking the file appears
like an ELF file and the read e_machine value is less than EM_NUM.
This better avoids spurious e_machine values when looking for an
e_machine in say a thread.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The processing of DSO_BINARY_TYPE__GNU_DEBUGDATA in symsrc__init happens
with an open ELF file but the error path only closes the associate fd.
Fix the goto so that the ELF file is also ended and memory released.
Fixes: b10f74308e130527 ("perf symbol: Support .gnu_debugdata for symbols")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Blamed commit implemented logic to discover available vsock transports by
grepping /proc/kallsyms for known symbols. It incorrectly filtered entries
by type 'd'.
For some kernel configs having
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VSOCKETS_LOOPBACK=y
kallsyms reports
0000000000000000 d virtio_transport [vmw_vsock_virtio_transport]
0000000000000000 t loopback_transport
Overzealous filtering might have affected vsock test suit, resulting in
insufficient/misleading testing.
Do not filter symbols by type. It never helped much.
Fixes: 3070c05b7afd ("vsock/test: Introduce get_transports()")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260116-vsock_test-kallsyms-grep-v1-1-3320bc3346f2@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two tests using NetDrvContEnv. One basic test that sets up a netkit
pair, with one end in a netns. Use LOCAL_PREFIX_V6 and nk_forward BPF
program to ping from a remote host to the netkit in netns.
Second is a selftest for netkit queue leasing, using io_uring zero copy
test binary inside of a netns with netkit. This checks that memory
providers can be bound against virtual queues in a netkit within a
netns that are leasing from a physical netdev in the default netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-17-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new parameter `lease` to NetDrvContEnv that sets up queue leasing
in the env.
The NETIF also has some ethtool parameters changed to support memory
provider tests. This is needed in NetDrvContEnv rather than individual
test cases since the cleanup to restore NETIF can't be done, until the
netns in the env is gone.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-16-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-15-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add nk_forward.bpf.c, a BPF program that forwards skbs matching some IPv6
prefix received on eth0 ifindex to a specified netkit ifindex. This will
be needed by netkit container tests.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-14-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queue
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is currently only intended for
dumping as part of the queue-get operation. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest that attempts to add a teql qdisc as a qfq child.
Since teql _must_ be added as a root qdisc, the kernel should reject
this.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following warning is encountered when building selftests on powerpc/32.
CC csum
csum.c: In function 'recv_get_packet_csum_status':
csum.c:710:50: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
711 | cm->cmsg_len, CMSG_LEN(sizeof(struct tpacket_auxdata)));
| ~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
csum.c:710:63: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
cm->cmsg_len has type __kernel_size_t and CMSG() macro has the type
returned by sizeof() which is size_t.
size_t is 'unsigned int' on some platforms and 'unsigned long' on
other ones so use %zu instead of %lu.
The code in question was introduced by
commit 91a7de85600d ("selftests/net: add csum offload test").
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/8b69b40826553c1dd500d9d25e45883744f3f348.1768556791.git.chleroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a simple ipvtap test to test handling
IP-address add/remove on ipvlan interface.
It creates a veth-interface and then creates several
network-namespace with ipvlan0 interface in it linked to veth.
Then it starts to add/remove addresses on ipvlan0 interfaces
in several threads.
At finish, it checks that there is no duplicated addresses.
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop the assertions about IOMMU mappings sizes for VFIO_TYPE1_IOMMU
modes (both the VFIO mode and the iommufd compatibility mode). These
assertions fail when CONFIG_IOMMUFD_VFIO_CONTAINER is enabled, since
iommufd compatibility mode provides different huge page behavior than
VFIO for VFIO_TYPE1_IOMMU. VFIO_TYPE1_IOMMU is an old enough interface
that it's not worth changing the behavior of VFIO and iommufd to match
nor care about the IOMMU mapping sizes.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lore.kernel.org/kvm/20260109143830.176dc279@shazbot.org/
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260114211252.2581145-1-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Test IOMMU mapping the BAR mmaps created during vfio_pci_device_setup().
All IOMMU modes are tested: vfio_type1 variants are expected to succeed,
while non-type1 modes are expected to fail. iommufd compat mode can be
updated to expect success once kernel support lands. Native iommufd will
not support mapping vaddrs backed by MMIO (it will support dma-buf based
MMIO mapping instead).
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-3-44e036d95e64@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Update vfio_pci_bar_map() to align BAR mmaps for efficient huge page
mappings. The manual mmap alignment can be removed once mmap(!MAP_FIXED)
on vfio device fds improves to automatically return well-aligned
addresses.
Also add MADV_HUGEPAGE, which encourages the kernel to use huge pages
(e.g. when /sys/kernel/mm/transparent_hugepage/enabled is set to "madvise").
Drop MAP_FILE from mmap(). It is an ignored compatibility flag.
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-2-44e036d95e64@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Replace scattered string literals with MODE_* macros in iommu.h. This
provides a single source of truth for IOMMU mode name strings.
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-1-44e036d95e64@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add selftests that verify the keyring behaves correctly.
For simplicity this works with dm-verity as a module.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Tidy up sysret_rip style (cast spacing, main(void), const placement).
No functional change intended.
Signed-off-by: UYeol Jo <jouyeol8739@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260111210126.74752-1-jouyeol8739@gmail.com
|
|
Pick up upstream work and
d9b40d7262a2 ("selftests/x86: Add selftests include path for kselftest.h after centralization")
especially which is a build fix needed for a selftests cleanup coming
ontop of this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The variable 'i' in wrong_timers_test() is declared but never used.
This was detected by Cppcheck static analysis.
tools/testing/selftests/alsa/utimer-test.c:144:9: style: Unused variable: i [unusedVariable]
Remove it to clean up the code and silence the warning.
Signed-off-by: LeeYongjun <jun85566@gmail.com>
Link: https://patch.msgid.link/20260118065510.29644-1-jun85566@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes TCP handling, tests, documentation, non-audit elided code,
and minor cosmetic changes"
* tag 'landlock-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the IOCTL access right
selftests/landlock: Properly close a file descriptor
landlock: Improve the comment for domain_is_scoped
selftests/landlock: Use scoped_base_variants.h for ptrace_test
selftests/landlock: Fix missing semicolon
selftests/landlock: Fix typo in fs_test
landlock: Optimize stack usage when !CONFIG_AUDIT
landlock: Fix spelling
landlock: Clean up hook_ptrace_access_check()
landlock: Improve erratum documentation
landlock: Remove useless include
landlock: Fix wrong type usage
selftests/landlock: NULL-terminate unix pathname addresses
selftests/landlock: Remove invalid unix socket bind()
selftests/landlock: Add missing connect(minimal AF_UNSPEC) test
selftests/landlock: Fix TCP bind(AF_UNSPEC) test case
landlock: Fix TCP handling of short AF_UNSPEC addresses
landlock: Fix formatting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix resctrl initialization on Hygon CPUs
- Fix resctrl memory bandwidth counters on Hygon CPUs
- Fix x86 self-tests build bug
* tag 'x86-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Add selftests include path for kselftest.h after centralization
x86/resctrl: Fix memory bandwidth counter width for Hygon
x86/resctrl: Add missing resctrl initialization for Hygon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix two objtool build failures that trigger in uncommon build
environments"
* tag 'objtool-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: fix build failure due to missing libopcodes check
objtool: fix compilation failure with the x32 toolchain
|
|
Improve the error handling in passive TFO test to check the return value
from sendto(), and to fail if read() or fprintf() failed.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/24707c8133f7095c0e5a94afa69e75c3a80bf6e7.1768312014.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve the passive TFO test to report failure if the server or the
client timed out or exited with non-zero status.
Before this commit, TFO test didn't fail even if exit(EXIT_FAILURE) is
added to the first line of the run_server() and run_client() functions.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/214d399caec2e5de7738ced5736829915d507e4e.1768312014.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If grep.lineNumber is enabled in .gitconfig,
[grep]
lineNumber = true
ynl-regen.sh fails with the following error:
$ ./tools/net/ynl/ynl-regen.sh -f
...
ynl_gen_c.py: error: argument --mode: invalid choice: '4:' (choose from user, kernel, uapi)
GEN 4: net/ipv4/fou_nl.c
Let's specify --no-line-number explicitly.
Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide run-time validation of the __counted_by_ptr() annotation via
newly added PTR_BOUNDS LKDTM test.
Link: https://patch.msgid.link/20251020220118.1226740-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The s390 vDSO source directory was recently moved,
but this reference was not updated.
Fixes: c0087d807ae8 ("s390/vdso: Rename vdso64 to vdso")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The previous change centralizing kselftest.h include path in lib.mk caused x86
selftests to fail, as x86 Makefile overwrites CFLAGS using ":=", dropping the
include path added in lib.mk. Therefore, helpers.h could not find kselftest.h
during compilation.
Fix this by adding the tools/testing/sefltest to CFLAGS in x86 Makefile.
[ bp: Correct commit ID in Fixes: ]
Fixes: e6fbd1759c9e ("selftests: complete kselftest include centralization")
Closes: https://lore.kernel.org/lkml/CA+G9fYvKjQcCBMfXA-z2YuL2L+3Qd-pJjEUDX8PDdz2-EEQd=Q@mail.gmail.com/T/#m83fd330231287fc9d6c921155bee16c591db7360
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Brendan Jackman <jackmanb@google.com>
Link: https://patch.msgid.link/20251022062948.162852-1-reddybalavignesh9979@gmail.com
|
|
This version includes the following changes:
- Allow read only commands for non root users when permitted
- Fix file descriptor leak in isolate_cpus()
- Replace hardcoded libnl3 include path
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The file descriptor opened in isolate_cpus() when (!level) is true was
not being closed before returning, causing a file descriptor leak in
both the error path and the success path.
When write() fails at line 950, the function returns at line 953 without
closing the file descriptor. Similarly, on success, the function returns
at line 956 without closing the file descriptor.
Add close(fd) calls before both return statements to fix the resource
leak. This follows the same pattern used elsewhere in the same function
where file descriptors are properly closed before returning (see lines
1005 and 1027).
Fixes: 997074df658e ("tools/power/x86/intel-speed-select: Use cgroup v2 isolation")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Replace hardcoded libnl3 include path with pkg-config detection to
improve portability across different distributions and build environments.
The previous implementation used a fixed path constructed from the
compiler's sysroot, which could fail on systems with non-standard
library installations. Now the build system:
- Attempts to detect libnl-3.0 include paths using pkg-config
- Falls back to /usr/include/libnl3 if pkg-config is unavailable
- Maintains backward compatibility with existing build configurations
This ensures the tool builds correctly on a wider range of systems
while preserving existing behavior when pkg-config is not present.
Closes:https://bugzilla.kernel.org/show_bug.cgi?id=220819
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
When permitted by the file /dev/isst_interface, allow to issue commands
for non root users.
When user id is non root, check if "/dev/isst_interface" can still be
opened. If this file can be opened, allow all read only commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
On my arm64 machine, I get the following failure:
...
tester_init:PASS:tester_log_buf 0 nsec
process_subtest:PASS:obj_open_mem 0 nsec
process_subtest:PASS:specs_alloc 0 nsec
serial_test_map_kptr:PASS:rcu_tasks_trace_gp__open_and_load 0 nsec
...
test_map_kptr_success:PASS:map_kptr__open_and_load 0 nsec
test_map_kptr_success:PASS:test_map_kptr_ref1 refcount 0 nsec
test_map_kptr_success:FAIL:test_map_kptr_ref1 retval unexpected error: 2 (errno 2)
test_map_kptr_success:PASS:test_map_kptr_ref2 refcount 0 nsec
test_map_kptr_success:FAIL:test_map_kptr_ref2 retval unexpected error: 1 (errno 2)
...
#201/21 map_kptr/success-map:FAIL
In serial_test_map_kptr(), before test_map_kptr_success(), one
kern_sync_rcu() is used to have some delay for freeing the map.
But in my environment, one kern_sync_rcu() seems not enough and
caused the test failure.
In bpf_map_free_in_work() in syscall.c, the queue time for
queue_work(system_dfl_wq, &map->work)
may be longer than expected. This may cause the test failure
since test_map_kptr_success() expects all previous maps having been freed.
Since it is not clear how long queue_work() time takes, a bpf prog
is added to count the reference after bpf_kfunc_call_test_acquire().
If the number of references is 2 (for initial ref and the one just
acquired), all previous maps should have been released. This will
resolve the above 'retval unexpected error' issue.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260116052245.3692405-1-yonghong.song@linux.dev
|
|
If CONFIG_VXLAN is 'm', struct vxlanhdr will not be in vmlinux.h.
Add a ___local variant to support cases where vxlan is a module.
Fixes: 8517b1abe5ea ("selftests/bpf: Integrate test_tc_tunnel.sh tests into test_progs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115163457.146267-1-alan.maguire@oracle.com
|
|
Add support for the 'prepend' option when attaching tcx_ingress and
tcx_egress programs. This option allows inserting a BPF program at
the beginning of the TCX chain instead of appending it at the end.
The implementation uses BPF_F_BEFORE flag which automatically inserts
the program at the beginning of the chain when no relative reference
is specified.
This change includes:
- Modify do_attach_tcx() to support prepend insertion using BPF_F_BEFORE
- Update documentation to describe the new 'prepend' option
- Add bash completion support for the 'prepend' option on tcx attach types
- Add example usage in the documentation
- Add validation to reject 'overwrite' for non-XDP attach types
The 'prepend' option is only valid for tcx_ingress and tcx_egress attach
types. For XDP attach types, the existing 'overwrite' option remains
available.
Example usage:
# bpftool net attach tcx_ingress name tc_prog dev lo prepend
This feature is useful when the order of program execution in the TCX
chain matters and users need to ensure certain programs run first.
Co-developed-by: Siwan Kim <siwan.kim@navercorp.com>
Signed-off-by: Siwan Kim <siwan.kim@navercorp.com>
Signed-off-by: Gyutae Bae <gyutae.bae@navercorp.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260112034516.22723-1-gyutae.opensource@navercorp.com
|
|
As part of the vdso build restructuring, vgetrandom-chacha.S moved
into the vdso/vdso64 subdirectory. Update the selftest #include to
match.
Closes: https://lore.kernel.org/oe-lkp/202601161608.5cd5af9a-lkp@intel.com
Fixes: 693c819fedcd ("x86/entry/vdso: Refactor the vdso build")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260116204057.386268-4-hpa@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- Recognize all ZONE_DEVICE users as physaddr consumers
- Fix format string for extended_linear_cache_size_show()
- Fix target list setup for multiple decoders sharing the same
downstream port
- Restore HBIW check before derefernce platform data
- Fix potential infinite loop in __cxl_dpa_reserve()
- Check for invalid addresses returned from translation functions on
error
* tag 'cxl-fixes-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Check for invalid addresses returned from translation functions on errors
cxl/hdm: Fix potential infinite loop in __cxl_dpa_reserve()
cxl/acpi: Restore HBIW check before dereferencing platform_data
cxl/port: Fix target list setup for multiple decoders sharing the same dport
cxl/region: fix format string for resource_size_t
x86/kaslr: Recognize all ZONE_DEVICE users as physaddr consumers
|
|
Currently the only way of excluding certain tests from a collection is by
passing all the other tests explicitly via `--test`. Therefore, if the user
wants to skip a single test the resulting command line might be too big,
depending on the collection. Add an option `--skip` that takes care of
that.
Link: https://lore.kernel.org/r/20260116-selftests-add_skip_opt-v1-1-ab54afaae81b@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cpupower currently installs a cpupower.service unit file into unitdir
unconditionally, regardless of whether systemd is used by the host.
Improve the installation procedure by making this systemd step optional:
a 'SYSTEMD' build parameter that defaults to 'true' and can be set to
'false' to disable the installation of systemd's unit file.
Since 'SYSTEMD' defaults to true, the current behavior is kept as the
default.
Link: https://lore.kernel.org/r/20260113132753.1730020-2-joaomarcos.costa@bootlin.com
Signed-off-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add tests for OPEN_TREE_NAMESPACE.
Link: https://patch.msgid.link/20251229-work-empty-namespace-v1-2-bfb24c7b061f@kernel.org
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before the last commit, sync_linked_regs() corrupted the register whose
bounds are being updated by copying known_reg's id to it. The ids are
the same in value but known_reg has the BPF_ADD_CONST flag which is
wrongly copied to reg.
This later causes issues when creating new links to this reg.
assign_scalar_id_before_mov() sees this BPF_ADD_CONST and gives a new id
to this register and breaks the old links. This is exposed by the added
selftest.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Update the nested dirty log test to validate KVM's handling of READ faults
when dirty logging is enabled. Specifically, set the Dirty bit in the
guest PTEs used to map L2 GPAs, so that KVM will create writable SPTEs
when handling L2 read faults. When handling read faults in the shadow MMU,
KVM opportunistically creates a writable SPTE if the mapping can be
writable *and* the gPTE is dirty (or doesn't support the Dirty bit), i.e.
if KVM doesn't need to intercept writes in order to emulate Dirty-bit
updates.
To actually test the L2 READ=>WRITE sequence, e.g. without masking a false
pass by other test activity, route the READ=>WRITE and WRITE=>WRITE
sequences to separate L1 pages, and differentiate between "marked dirty
due to a WRITE access/fault" and "marked dirty due to creating a writable
SPTE for a READ access/fault". The updated sequence exposes the bug fixed
by KVM commit 1f4e5fc83a42 ("KVM: x86: fix nested guest live migration
with PML") when the guest performs a READ=>WRITE sequence with dirty guest
PTEs.
Opportunistically tweak and rename the address macros, and add comments,
to make it more obvious what the test is doing. E.g. NESTED_TEST_MEM1
vs. GUEST_TEST_MEM doesn't make it all that obvious that the test is
creating aliases in both the L2 GPA and GVA address spaces, but only when
L1 is using TDP to run L2.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260115172154.709024-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Currently, the test breaks if the SUT already has a default route
configured for IPv6. Fix by avoiding the use of the default namespace.
Fixes: 4ed591c8ab44 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Loopback transport can mangle data in rx queue when a linear skb is
followed by a small MSG_ZEROCOPY packet.
To exercise the logic, send out two packets: a weirdly sized one (to ensure
some spare tail room in the skb) and a zerocopy one that's small enough to
fit in the spare room of its predecessor. Then, wait for both to land in
the rx queue, and check the data received. Faulty packets merger manifests
itself by corrupting payload of the later packet.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260113-vsock-recv-coalescence-v2-2-552b17837cf4@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
