| Age | Commit message (Collapse) | Author |
|---|
|
The sched_ext selftests runner runs each test in the same process,
with each test possibly forking multiple times. When the main runner
has not flushed its stdout, the children inherit the buffered output
for previous tests and emit it during exit. This causes log spam.
Make sure stdout/stderr is fully flushed before each test.
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Jakub reports spurious failures of the 'conntrack_reverse_clash.sh'
selftest. A bogus test makes nat core resort to port rewrite even
though there is no need for this.
When the test is made, nf_nat_used_tuple() would already have caused us
to return if no other CPU had added a colliding entry.
Moreover, nf_nat_used_tuple() would have ignored the colliding entry if
their origin tuples had been the same.
All that is left to check is if the colliding entry in the hash table
is subject to NAT, and, if its not, if our entry matches in the reverse
direction, e.g. hash table has
addr1:1234 -> addr2:80, and we want to commit
addr2:80 -> addr1:1234.
Because we already checked that neither the new nor the committed entry is
subject to NAT we only have to check origin vs. reply tuple:
for non-nat entries, the reply tuple is always the inverted original.
Just in case there are more problems extend the error reporting
in the selftest while at it and dump conntrack table/stats on error.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/
Fixes: d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
misplacements
Add a test case for a bug fixed by Jamal [1] and for scenario where an
ets drr class is inserted into the active list twice.
- Try to delete ets drr class' qdisc while still keeping it in the
active list
- Try to add ets class to the active list twice
[1] https://lore.kernel.org/netdev/20251128151919.576920-1-jhs@mojatatu.com/
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251208190125.1868423-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) Fix refcount leaks in nf_conncount, from Fernando Fernandez Mancera.
This addresses a recent regression that came in the last -next
pull request.
2) Fix a null dereference in route error handling in IPVS, from Slavin
Liu. This is an ancient issue dating back to 5.1 days.
3) Always set ifindex in route tuple in the flowtable output path, from
Lorenzo Bianconi. This bug came in with the recent output path refactoring.
4) Prefer 'exit $ksft_xfail' over 'exit $ksft_skip' when we fail to
trigger a nat race condition to exercise the clash resolution path in
selftest infra, $ksft_skip should be reserved for missing tooling,
From myself.
* tag 'nf-25-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: prefer xfail in case race wasn't triggered
netfilter: always set route tuple out ifindex
ipvs: fix ipv4 null-ptr-deref in route error path
netfilter: nf_conncount: fix leaked ct in error paths
====================
Link: https://patch.msgid.link/20251210110754.22620-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After fixing traffic matching in the previous patch, the test does not need
to use the sleep anymore. So drop vx_wait() altogether, migrate all callers
of vx{10,20}_create_wait() to the corresponding _create(), and drop the now
unused _create_wait() helpers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/eabfe4fa12ae788cf3b8c5c876a989de81dfc3d3.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test runs an overlay traffic, forwarded over a multicast-routed VXLAN
underlay. In order to determine whether packets reach their intended
destination, it uses a TC match. For convenience, it uses a flower match,
which however does not allow matching on the encapsulated packet. So
various service traffic ends up being indistinguishable from the test
packets, and ends up confusing the test. To alleviate the problem, the test
uses sleep to allow the necessary service traffic to run and clear the
channel, before running the test traffic. This worked for a while, but
lately we have nevertheless seen flakiness of the test in the CI.
Fix the issue by using u32 to match the encapsulated packet as well. The
confusing packets seem to always be IPv6 multicast listener reports.
Realistically they could be ARP or other ICMP6 traffic as well. Therefore
look for ethertype IPv4 in the IPv4 traffic test, and for IPv6 / UDP
combination in the IPv6 traffic test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6438cb1613a2a667d3ff64089eb5994778f247af.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flower is commonly used to match on packets in many bash-based selftests.
A dump of a flower filter including statistics looks something like this:
[
{
"protocol": "all",
"pref": 49152,
"kind": "flower",
"chain": 0
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
}
]
The JQ query in the helper function tc_rule_stats_get() assumes this form
and looks for the second element of the array.
However, a dump of a u32 filter looks like this:
[
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0
},
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0,
"options": {
"fh": "800:",
"ht_divisor": 1
}
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
},
]
There's an extra element which the JQ query ends up choosing.
Instead of hard-coding a particular index, look for the entry on which a
selector .options.actions yields anything.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/12982a44471c834511a0ee6c1e8f57e3a5307105.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub says: "We try to reserve SKIP for tests skipped because tool is
missing in env, something isn't built into the kernel etc."
use xfail, we can't force the race condition to appear at will
so its expected that the test 'fails' occasionally.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175647.5c32f419@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add a regression test for bpf_d_path() to cover incorrect verifier
assumptions caused by an incorrect function prototype. The test
attaches to the fallocate hook, calls bpf_d_path() and verifies that
a simple prefix comparison on the returned pathname behaves correctly
after the fix in patch 1. It ensures the verifier does not assume
the buffer remains unwritten.
Co-developed-by: Zesen Liu <ftyg@live.com>
Signed-off-by: Zesen Liu <ftyg@live.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Link: https://lore.kernel.org/r/20251206141210.3148-3-electronlsr@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix
tfo.c: In function ‘run_server’:
tfo.c:84:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by evaluating the return value from read() and displaying an error message
if it reports an error.
Fixes: c65b5bb2329e3 ("selftests: net: add passive TFO test binary")
Cc: David Wei <dw@davidwei.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-14-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix
ksft.h: In function ‘ksft_ready’:
ksft.h:27:9: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’
ksft.h: In function ‘ksft_wait’:
ksft.h:51:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by checking the return value of the affected functions and displaying
an error message if an error is seen.
Fixes: 2b6d490b82668 ("selftests: drv-net: Factor out ksft C helpers")
Cc: Joe Damato <jdamato@fastly.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-11-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
support
Fix:
gcc: error: unrecognized command-line option ‘-Wflex-array-member-not-at-end’
by making the compiler option dependent on its support.
Fixes: 1838731f1072c ("selftest: af_unix: Add -Wall and -Wflex-array-member-not-at-end to CFLAGS.")
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-7-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 'poll_partial_rec_async' a uninitialized char variable 'token' with
is used for write/read instruction to synchronize between threads
via a pipe.
tls.c:2833:26: warning: variable 'token' is uninitialized
when passed as a const pointer argument
Initialize 'token' to '\0' to silence compiler warning.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20251205163242.14615-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Ingo Molnar:
- Standardize on ktime_t in restart_block::time as well (Thomas
Weißschuh)
- Futex selftests:
- Add robust list testcases (André Almeida)
- Formatting fixes/cleanups (Carlos Llamas)
* tag 'locking-futex-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Store time as ktime_t in restart block
selftests/futex: Create test for robust list
selftests/futex: Skip tests if shmget unsupported
selftests/futex: Add newline to ksft_exit_fail_msg()
selftests/futex: Remove unused test_futex_mpol()
|
|
This commit adds 3 tests to verify a common compiler generated
pattern for sign extension (r1 <<= 32; r1 s>>= 32).
The tests make sure the register bounds are correctly computed both for
positive and negative register values.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrew Pinski <andrew.pinski@oss.qualcomm.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20251202180220.11128-3-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add test cases for situations where adding the following types of file
descriptors to a cpumap entry should fail:
- Non-BPF file descriptor (expect -EINVAL)
- Nonexistent file descriptor (expect -EBADF)
Also tighten the assertion for the expected error when adding a
non-BPF_XDP_CPUMAP program to a cpumap entry.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20251208131449.73036-3-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If many dmabufs are present, reads of the dmabuf iterator can be
truncated at PAGE_SIZE or user buffer size boundaries before the fix in
"bpf: Fix truncated dmabuf iterator reads". Add a test to
confirm truncation does not occur.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Link: https://lore.kernel.org/r/20251204000348.1413593-2-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
glibc ≥ 2.42 (GCC 15) defaults to -std=gnu23, which promotes
-Wdiscarded-qualifiers to an error.
In C23, strstr() and strchr() return "const char *".
Change variable types to const char * where the pointers are never
modified (res, sym_sfx, next_path).
Suggested-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/20251206092825.1471385-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel is now built with -fms-extensions. Anonymous structs or
unions permitted by these extensions have been used in several places,
and can end up in the generated vmlinux.h file, for example:
struct ns_tree {
[...]
};
[...]
struct ns_common {
[...]
union {
struct ns_tree;
struct callback_head ns_rcu;
};
};
Trying to include this header for compiling a tool may result in build
warnings, if the compiler does not expect these extensions. This is the
case, for example, with bpftool:
In file included from skeleton/pid_iter.bpf.c:3:
.../tools/testing/selftests/bpf/tools/build/bpftool/vmlinux.h:64057:3:
warning: declaration does not declare anything
[-Wmissing-declarations]
64057 | struct ns_tree;
| ^~~~~~~~~~~~~~
Fix these build warnings in bpftool by turning on Microsoft extensions
when compiling the two BPF programs that rely on vmlinux.h.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Closes: https://lore.kernel.org/bpf/CAADnVQK9ZkPC7+R5VXKHVdtj8tumpMXm7BTp0u9CoiFLz_aPTg@mail.gmail.com/
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20251208130748.68371-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw
limited by the cooling hardware, may exceed battery power draw limit
when on AC power)
- amd/hsmp: Allow more than one data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous WMI
functions through fw_attributes (deprecates the custom BIOS features
interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 to utf8 string conversion when output size restricted
- Improve error code consistency for utf8 to utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing
projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C files as
well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was
successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits)
tools/power/x86/intel-speed-select: v1.24 release
tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets
tools/power/x86/intel-speed-select: Check feature status
platform/x86: asus-wmi: use brightness_set_blocking() for kbd led
fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
platform/x86: asus-armoury: add support for GA503QR
platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak
platform/x86: hp-wmi: Order DMI board name arrays
platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
platform: surface: replace use of system_wq with system_percpu_wq
platform: x86: replace use of system_wq with system_percpu_wq
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
acpi: platform_profile - Add max-power profile option
platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
platform/x86/amd/pmf: Refactor repetitive BIOS output handling
platform/x86/uniwill: Add TUXEDO devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto
Pull __auto_type to auto conversion from Peter Anvin:
"Convert '__auto_type' to 'auto', defining a macro for 'auto' unless
C23+ is in use"
* tag 'auto-type-conversion-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto:
tools/virtio: replace "__auto_type" with "auto"
selftests/bpf: replace "__auto_type" with "auto"
arch/x86: replace "__auto_type" with "auto"
arch/nios2: replace "__auto_type" and adjacent equivalent with "auto"
fs/proc: replace "__auto_type" with "const auto"
include/linux: change "__auto_type" to "auto"
compiler_types.h: add "auto" as a macro for "__auto_type"
|
|
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wireguard YNL conversion was missing the customary .deps entry.
NIPA doesn't catch this but my CentOS 9 system complains:
wireguard-user.c:72:10: error: ‘WGALLOWEDIP_A_FLAGS’ undeclared here
wireguard-user.c:58:67: error: parameter 1 (‘value’) has incomplete type
58 | const char *wireguard_wgallowedip_flags_str(enum wgallowedip_flag value)
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~
And similarly does Ubuntu 22.04.
One extra complication here is that we renamed the header guard,
so we need to compat with both old and new guard define.
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251207013848.1692990-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace one instance of "__auto_type" with "auto" in:
tools/virtio/linux/compiler.h
This file *does* include <linux/compiler_types.h> directly, so there
is no need to duplicate the definition.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
|
|
Replace instances of "__auto_type" with "auto" in:
tools/testing/selftests/bpf/prog_tests/socket_helpers.h
This file does not seem to be including <linux/compiler_types.h>
directly or indirectly, so copy the definition but guard it with
!defined(auto).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
|
|
nr_dying_descendants
Replace the manual sleep-and-retry logic in test_kmem_dead_cgroups()
with the new helper `cg_read_key_long_poll()`. This change improves
the robustness of the test by polling the "nr_dying_descendants"
counter in `cgroup.stat` until it reaches 0 or the timeout is exceeded.
Additionally, increase the retry timeout to 8 seconds (from 5 seconds)
based on testing results:
- With 5-second timeout: 4/20 runs passed.
- With 8-second timeout: 20/20 runs passed.
The 8 second timeout is based on stress testing of test_kmem_dead_cgroups()
under load: 5 seconds was occasionally not enough for reclaim of dying
descendants to complete, whereas 8 seconds consistently covered the observed
latencies. This value is intended as a generous upper bound for the
asynchronous reclaim and is not tied to any specific kernel constant, so it
can be adjusted in the future if reclaim behavior changes.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
test_memcg_sock() currently requires that memory.stat's "sock " counter
is exactly zero immediately after the TCP server exits. On a busy system
this assumption is too strict:
- Socket memory may be freed with a small delay (e.g. RCU callbacks).
- memcg statistics are updated asynchronously via the rstat flushing
worker, so the "sock " value in memory.stat can stay non-zero for a
short period of time even after all socket memory has been uncharged.
As a result, test_memcg_sock() can intermittently fail even though socket
memory accounting is working correctly.
Make the test more robust by polling memory.stat for the "sock "
counter and allowing it some time to drop to zero instead of checking
it only once. The timeout is set to 3 seconds to cover the periodic
rstat flush interval (FLUSH_TIME = 2*HZ by default) plus some
scheduling slack. If the counter does not become zero within the
timeout, the test still fails as before.
On my test system, running test_memcontrol 50 times produced:
- Before this patch: 6/50 runs passed.
- After this patch: 50/50 runs passed.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce a new helper function `cg_read_key_long_poll()` in
cgroup_util.h. This function polls the specified key in a cgroup file
until it matches the expected value or the retry limit is reached,
with configurable wait intervals between retries.
This helper is particularly useful for handling asynchronously updated
cgroup statistics (e.g., memory.stat), where immediate reads may
observe stale values, especially on busy systems. It allows tests and
other utilities to handle such cases more flexibly.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit c69993ecdd4d: "perf: Support deferred
user unwind"), perf can use deferred callchains for userspace stack
trace with frame pointers like below:
$ perf record --call-graph fp,defer ...
This will be transparent to users when it comes to other commands like
perf report and perf script. They will merge the deferred callchains
to the previous samples as if they were collected together.
ARM SPE updates
- Extensive enhancements to support various kinds of memory
operations including GCS, MTE allocation tags, memcpy/memset,
register access, and SIMD operations.
- Add inverted data source filter (inv_data_src_filter) support to
exclude certain data sources.
- Improve documentation.
Vendor event updates:
- Intel: Updated event files for Sierra Forest, Panther Lake, Meteor
Lake, Lunar Lake, Granite Rapids, and others.
- Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE
definitions.
- RISC-V: Added JSON support for T-HEAD C920V2.
Misc:
- Improve pointer tracking in data type profiling. It'd give better
output when the variable is using container_of() to convert type.
- Annotation support for perf c2c report in TUI. Press 'a' key to
enter annotation view from cacheline browser window. This will show
which instruction is causing the cacheline contention.
- Lots of fixes and test coverage improvements!"
* tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits)
libperf: Use 'extern' in LIBPERF_API visibility macro
perf stat: Improve handling of termination by signal
perf tests stat: Add test for error for an offline CPU
perf stat: When no events, don't report an error if there is none
perf tests stat: Add "--null" coverage
perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask
libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map
perf stat: Allow no events to open if this is a "--null" run
perf test kvm: Add some basic perf kvm test coverage
perf tests evlist: Add basic evlist test
perf tests script dlfilter: Add a dlfilter test
perf tests kallsyms: Add basic kallsyms test
perf tests timechart: Add a perf timechart test
perf tests top: Add basic perf top coverage test
perf tests buildid: Add purge and remove testing
perf tests c2c: Add a basic c2c
perf c2c: Clean up some defensive gets and make asan clean
perf jitdump: Fix missed dso__put
perf mem-events: Don't leak online CPU map
perf hist: In init, ensure mem_info is put on error paths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Address various objtool scalability bugs/inefficiencies exposed by
allmodconfig builds, plus improve the quality of alternatives
instructions generated code and disassembly"
* tag 'objtool-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Simplify .annotate_insn code generation output some more
objtool: Add more robust signal error handling, detect and warn about stack overflows
objtool: Remove newlines and tabs from annotation macros
objtool: Consolidate annotation macros
x86/asm: Remove ANNOTATE_DATA_SPECIAL usage
x86/alternative: Remove ANNOTATE_DATA_SPECIAL usage
objtool: Fix stack overflow in validate_branch()
|
|
Pull nfsd updates from Chuck Lever:
- Mike Snitzer's mechanism for disabling I/O caching introduced in
v6.18 is extended to include using direct I/O. The goal is to further
reduce the memory footprint consumed by NFS clients accessing large
data sets via NFSD.
- The NFSD community adopted a maintainer entry profile during this
cycle. See
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst
- Work continues on hardening NFSD's implementation of the pNFS block
layout type. This type enables pNFS clients to directly access the
underlying block devices that contain an exported file system,
reducing server overhead and increasing data throughput.
- The remaining patches are clean-ups and minor optimizations. Many
thanks to the contributors, reviewers, testers, and bug reporters who
participated during the v6.19 NFSD development cycle.
* tag 'nfsd-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (38 commits)
NFSD: nfsd-io-modes: Separate lists
NFSD: nfsd-io-modes: Wrap shell snippets in literal code blocks
NFSD: Add toctree entry for NFSD IO modes docs
NFSD: add Documentation/filesystems/nfs/nfsd-io-modes.rst
NFSD: Implement NFSD_IO_DIRECT for NFS WRITE
NFSD: Make FILE_SYNC WRITEs comply with spec
NFSD: Add trace point for SCSI fencing operation.
NFSD: use correct reservation type in nfsd4_scsi_fence_client
xdrgen: Don't generate unnecessary semicolon
xdrgen: Fix union declarations
NFSD: don't start nfsd if sv_permsocks is empty
xdrgen: handle _XdrString in union encoder/decoder
xdrgen: Fix the variable-length opaque field decoder template
xdrgen: Make the xdrgen script location-independent
xdrgen: Generalize/harden pathname construction
lockd: don't allow locking on reexported NFSv2/3
MAINTAINERS: add a nfsd blocklayout reviewer
nfsd: Use MD5 library instead of crypto_shash
nfsd: stop pretending that we cache the SEQUENCE reply.
NFS: nfsd-maintainer-entry-profile: Inline function name prefixes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This mainly fixes handling of disconnected directories and adds new
tests"
* tag 'landlock-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add disconnected leafs and branch test suites
selftests/landlock: Add tests for access through disconnected paths
landlock: Improve variable scope
landlock: Fix handling of disconnected directories
selftests/landlock: Fix makefile header list
landlock: Make docs in cred.h and domain.h visible
landlock: Minor comments improvements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add LLC statistics columns:
LLCkRPS = Last Level Cache Thousands of References Per Second
LLC%hit = Last Level Cache Hit %
- Recognize Wildcat Lake and Nova Lake platforms
- Add MSR check for Android
- Add APERF check for VMWARE
- Add RAPL check for AWS
- Minor fixes to turbostat (and x86_energy_perf_policy)
* tag 'turbostat-v2025.12.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (21 commits)
tools/power turbostat: version 2025.12.02
tools/power turbostat: Print wide names only for RAW 64-bit columns
tools/power turbostat: Print percentages in 8-columns
tools/power turbostat: Print "nan" for out of range percentages
tools/power turbostat: Validate APERF access for VMWARE
tools/power turbostat: Enhance perf probe
tools/power turbostat: Validate RAPL MSRs for AWS Nitro Hypervisor
tools/power x86_energy_perf_policy: Fix potential NULL pointer dereference
tools/power x86_energy_perf_policy: Fix format string in error message
tools/power x86_energy_perf_policy: Simplify Android MSR probe
tools/power x86_energy_perf_policy: Add Android MSR device support
tools/power turbostat: Add run-time MSR driver probe
tools/power turbostat: Set per_cpu_msr_sum to NULL after free
tools/power turbostat: Add LLC stats
tools/power turbostat: Remove dead code
tools/power turbostat: Refactor floating point printout code
tools/power turbostat.8: Update example
tools/power turbostat: Refactor added-counter value printing code
tools/power turbostat: Refactor added column header printing
tools/power turbostat: Add Wildcat Lake and Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"These are mainly bug fixes and code updates.
There is a new feature to divide up memmap= carve outs and a fix
caught in linux-next for that patch. Managing memmap memory on the fly
for multiple VM's was proving difficult and Mike provided a driver
which allows for the memory to be better manged.
Summary:
- Allow exposing RAM carveouts as NVDIMM DIMM devices
- Prevent integer overflow in ramdax_get_config_data()
- Replace use of system_wq with system_percpu_wq
- Documentation: btt: Unwrap bit 31-30 nested table
- tools/testing/nvdimm: Use per-DIMM device handle"
* tag 'libnvdimm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Prevent integer overflow in ramdax_get_config_data()
Documentation: btt: Unwrap bit 31-30 nested table
nvdimm: replace use of system_wq with system_percpu_wq
tools/testing/nvdimm: Use per-DIMM device handle
nvdimm: allow exposing RAM carveouts as NVDIMM DIMM devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Enable parallel hotplug for RISC-V
- Optimize vector regset allocation for ptrace()
- Add a kernel selftest for the vector ptrace interface
- Enable the userspace RAID6 test to build and run using RISC-V vectors
- Add initial support for the Zalasr RISC-V ratified ISA extension
- For the Zicbop RISC-V ratified ISA extension to userspace, expose
hardware and kernel support to userspace and add a kselftest for
Zicbop
- Convert open-coded instances of 'asm goto's that are controlled by
runtime ALTERNATIVEs to use riscv_has_extension_{un,}likely(),
following arm64's alternative_has_cap_{un,}likely()
- Remove an unnecessary mask in the GFP flags used in some calls to
pagetable_alloc()
* tag 'riscv-for-linus-6.19-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: Add Zicbop prefetch test
riscv: hwprobe: Expose Zicbop extension and its block size
riscv: Introduce Zalasr instructions
riscv: hwprobe: Export Zalasr extension
dt-bindings: riscv: Add Zalasr ISA extension description
riscv: Add ISA extension parsing for Zalasr
selftests: riscv: Add test for the Vector ptrace interface
riscv: ptrace: Optimize the allocation of vector regset
raid6: test: Add support for RISC-V
raid6: riscv: Allow code to be compiled in userspace
raid6: riscv: Prevent compiler from breaking inline vector assembly code
riscv: cmpxchg: Use riscv_has_extension_likely
riscv: bitops: Use riscv_has_extension_likely
riscv: hweight: Use riscv_has_extension_likely
riscv: checksum: Use riscv_has_extension_likely
riscv: pgtable: Use riscv_has_extension_unlikely
riscv: Remove __GFP_HIGHMEM masking
RISC-V: Enable HOTPLUG_PARALLEL for secondary CPUs
|
|
Make sure 1) a timer callback can also reference the associated
struct_ops, and then make sure 2) the timer callback cannot get a
dangled pointer to the struct_ops when the map is freed.
The test schedules a timer callback from a struct_ops program since
struct_ops programs do not pin the map. It is possible for the timer
callback to run after the map is freed. The timer callback calls a
kfunc that runs .test_1() of the associated struct_ops, which should
return MAP_MAGIC when the map is still alive or -1 when the map is
gone.
The first subtest added in this patch schedules the timer callback to
run immediately, while the map is still alive. The second subtest added
schedules the callback to run 500ms after syscall_prog runs and then
frees the map right after syscall_prog runs. Both subtests then wait
until the callback runs to check the return of the kfunc.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-7-ameryhung@gmail.com
|
|
Add a test to make sure implicit struct_ops association does not
break backward compatibility nor return incorrect struct_ops.
struct_ops programs should still be allowed to be reused in
different struct_ops map. The associated struct_ops map set implicitly
however will be poisoned. Trying to read it through the helper
bpf_prog_get_assoc_struct_ops() should result in a NULL pointer.
While recursion of test_1() cannot happen due to the associated
struct_ops being ambiguois, explicitly check for it to prevent stack
overflow if the test regresses.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-6-ameryhung@gmail.com
|
|
Test BPF_PROG_ASSOC_STRUCT_OPS command that associates a BPF program
with a struct_ops. The test follows the same logic in commit
ba7000f1c360 ("selftests/bpf: Test multi_st_ops and calling kfuncs from
different programs"), but instead of using map id to identify a specific
struct_ops, this test uses the new BPF command to associate a struct_ops
with a program.
The test consists of two sets of almost identical struct_ops maps and BPF
programs associated with the map. Their only difference is the unique
value returned by bpf_testmod_multi_st_ops::test_1().
The test first loads the programs and associates them with struct_ops
maps. Then, it exercises the BPF programs. They will in turn call kfunc
bpf_kfunc_multi_st_ops_test_1_prog_arg() to trigger test_1() of the
associated struct_ops map, and then check if the right unique value is
returned.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-5-ameryhung@gmail.com
|
|
Add low-level wrapper and libbpf API for BPF_PROG_ASSOC_STRUCT_OPS
command in the bpf() syscall.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-4-ameryhung@gmail.com
|
|
Add a new BPF command BPF_PROG_ASSOC_STRUCT_OPS to allow associating
a BPF program with a struct_ops map. This command takes a file
descriptor of a struct_ops map and a BPF program and set
prog->aux->st_ops_assoc to the kdata of the struct_ops map.
The command does not accept a struct_ops program nor a non-struct_ops
map. Programs of a struct_ops map is automatically associated with the
map during map update. If a program is shared between two struct_ops
maps, prog->aux->st_ops_assoc will be poisoned to indicate that the
associated struct_ops is ambiguous. The pointer, once poisoned, cannot
be reset since we have lost track of associated struct_ops. For other
program types, the associated struct_ops map, once set, cannot be
changed later. This restriction may be lifted in the future if there is
a use case.
A kernel helper bpf_prog_get_assoc_struct_ops() can be used to retrieve
the associated struct_ops pointer. The returned pointer, if not NULL, is
guaranteed to be valid and point to a fully updated struct_ops struct.
For struct_ops program reused in multiple struct_ops map, the return
will be NULL.
prog->aux->st_ops_assoc is protected by bumping the refcount for
non-struct_ops programs and RCU for struct_ops programs. Since it would
be inefficient to track programs associated with a struct_ops map, every
non-struct_ops program will bump the refcount of the map to make sure
st_ops_assoc stays valid. For a struct_ops program, it is protected by
RCU as map_free will wait for an RCU grace period before disassociating
the program with the map. The helper must be called in BPF program
context or RCU read-side critical section.
struct_ops implementers should note that the struct_ops returned may not
be initialized nor attached yet. The struct_ops implementer will be
responsible for tracking and checking the state of the associated
struct_ops map if the use case expects an initialized or attached
struct_ops.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-3-ameryhung@gmail.com
|
|
We have seen a number of issues like [1]; failures to deduplicate
key kernel data structures like task_struct. These are often hard
to debug from pahole even with verbose output, especially when
identity/equivalence checks fail deep in a nested struct comparison.
Here we add debug messages of the form
libbpf: STRUCT 'task_struct' size=2560 vlen=194 cand_id[54222] canon_id[102820] shallow-equal but not equiv for field#23 'sched_class': 0
These will be emitted during dedup from pahole when --verbose/-V
is specified. This greatly helps identify exactly where dedup
failures are experienced.
[1] https://lore.kernel.org/bpf/b8e8b560-bce5-414b-846d-0da6d22a9983@oracle.com/
Changes since v1:
- updated debug messages to refer to shallow-equal, added ids (Andrii)
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203191507.55565-1-alan.maguire@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fix from Steven Rostedt:
- Fix incorrect variable in error message in config-bisect.pl
If the old config file fails to get copied as the last good or bad
config file, then it fails the program and prints an error message.
But the variable used to print what the old config's name was
incorrect. It was $config when it should have been $output_config.
* tag 'ktest-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix uninitialized var in config-bisect.pl
|
|
Use 'extern' on LIBPERF_API to address this issue that started appearing
with gcc 15, first seen in ubuntu 25.10:
evlist.c: In function 'perf_evlist__purge':
evlist.c:202:17: error: implicit declaration of function 'perf_evsel__delete'; did you mean 'perf_evsel__exit'? [-Wimplicit-function-declaration]
202 | perf_evsel__delete(pos);
| ^~~~~~~~~~~~~~~~~~
| perf_evsel__exit
evlist.c:202:17: error: nested extern declaration of 'perf_evsel__delete' [-Werror=nested-externs]
evlist.c: In function 'perf_evlist__open':
evlist.c:261:23: error: implicit declaration of function 'perf_evsel__open'; did you mean 'perf_evsel__exit'? [-Wimplicit-function-declaration]
261 | err = perf_evsel__open(evsel, evsel->cpus, evsel->threads);
| ^~~~~~~~~~~~~~~~
| perf_evsel__exit
evlist.c:261:23: error: nested extern declaration of 'perf_evsel__open' [-Werror=nested-externs]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Adapt the ftracetest script to be run from a different folder
This uses the already existing OPT_TEST_DIR but extends it further to
run independent tests, then add an --rv flag to allow using the
script for testing RV (mostly) independently on ftrace.
- Add basic RV selftests in selftests/verification for more validations
Add more validations for available/enabled monitors and reactors.
This could have caught the bug introducing kernel panic solved above.
Tests use ftracetest.
- Convert react() function in reactor to use va_list directly
Use a central helper to handle the variadic arguments. Clean up
macros and mark functions as static.
- Add lockdep annotations to reactors to have lockdep complain of
errors
If the reactors are called from improper context. Useful to develop
new reactors. This highlights a warning in the panic reactor that is
related to the printk subsystem and not to RV.
- Convert core RV code to use lock guards and __free helpers
This completely removes goto statements.
- Fix compilation if !CONFIG_RV_REACTORS
Fix the warning by keeping LTL monitor variable as always static.
* tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix compilation if !CONFIG_RV_REACTORS
rv: Convert to use __free
rv: Convert to use lock guard
rv: Add explicit lockdep context for reactors
rv: Make rv_reacting_on() static
rv: Pass va_list to reactors
selftests/verification: Add initial RV tests
selftest/ftrace: Generalise ftracetest to use with RV
|
