summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2026-02-17selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter ↵Aleksei Oladko
enabled The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv4 packet contains a zero IP header checksum. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by calculating and setting a valid IPv4 header checksum for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. Fixed by using the payload_template_calc_checksum() / payload_template_expand_checksum() helpers that are only available in v6.3 and newer kernels. Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-17selftests: forwarding: bridge_mdb_max: add tests for mdb_n_entries warningNikolay Aleksandrov
Recently we were able to trigger a warning in the mdb_n_entries counting code. Add tests that exercise different ways which used to trigger that warning. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://patch.msgid.link/20260213070031.1400003-3-nikolay@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-17selftests: drv-net: add HDS payload sweep test for devmem TCPBobby Eshleman
Add check_rx_hds test that verifies header/data split works across payload sizes. The test sweeps payload sizes from 1 byte to 8KB, if any data propagates up to userspace as SCM_DEVMEM_LINEAR, then the test fails. This shows that regardless of payload size, ncdevmem's configuration of hds-thresh to 0 is respected. Add -L (--fail-on-linear) flag to ncdevmem that causes the receiver to fail if any SCM_DEVMEM_LINEAR cmsg is received. Use socat option for fixed block sizing and tcp nodelay to disable nagle's algo to avoid buffering. Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com> Link: https://patch.msgid.link/20260211-fbnic-tcp-hds-fixes-v1-4-55d050e6f606@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-16tools/sched_ext: scx_userland: fix stale data on restartDavid Carlier
Reset all counters, tasks and vruntime_head list on restart. Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-02-16tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in ↵David Carlier
fcg_read_stats fcg_read_stats() had a VLA allocating 21 * nr_cpus * 8 bytes on the stack, risking stack overflow on large CPU counts (nr_cpus can be up to 512). Fix by using a single heap allocation with the correct size, reusing it across all stat indices, and freeing it at the end. Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-02-15Merge tag 'docs-7.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux Pull documentation fixes from Jonathan Corbet: "A handful of small, late-arriving documentation fixes" * tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: docs: toshiba_haps: fix grammar error in SSD warning Docs/mm: fix typos and grammar in page_tables.rst Docs/core-api: fix typos in rbtree.rst docs: clarify wording in programming-language.rst docs: process: maintainer-pgp-guide: update kernel.org docs link docs: kdoc_parser: allow __exit in function prototypes
2026-02-14Merge tag 'loongarch-7.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Select HAVE_CMPXCHG_{LOCAL,DOUBLE} - Add 128-bit atomic cmpxchg support - Add HOTPLUG_SMT implementation - Wire up memfd_secret system call - Fix boot errors and unwind errors for KASAN - Use BPF prog pack allocator and add BPF arena support - Update dts files to add nand controllers - Some bug fixes and other small changes * tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: dts: loongson-2k1000: Add nand controller support LoongArch: dts: loongson-2k0500: Add nand controller support LoongArch: BPF: Implement bpf_addr_space_cast instruction LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions LoongArch: BPF: Use BPF prog pack allocator LoongArch: Use IS_ERR_PCPU() macro for KGDB LoongArch: Rework KASAN initialization for PTW-enabled systems LoongArch: Disable instrumentation for setup_ptwalker() LoongArch: Remove some extern variables in source files LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT LoongArch: Handle percpu handler address for ORC unwinder LoongArch: Use %px to print unmodified unwinding address LoongArch: Prefer top-down allocation after arch_mem_init() LoongArch: Add HOTPLUG_SMT implementation LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE LoongArch: Wire up memfd_secret system call LoongArch: Replace seq_printf() with seq_puts() for simple strings LoongArch: Add 128-bit atomic cmpxchg support LoongArch: Add detection for SC.Q support LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
2026-02-14Merge tag 'memblock-v7.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock updates from Mike Rapoport: - update tools/include/linux/mm.h to fix memblock tests compilation - drop redundant struct page* parameter from memblock_free_pages() and get struct page from the pfn - add underflow detection for size calculation in memtest and warn about underflow when VM_DEBUG is enabled * tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm/memtest: add underflow detection for size calculation memblock: drop redundant 'struct page *' argument from memblock_free_pages() memblock test: include <linux/sizes.h> from tools mm.h stub
2026-02-13Merge tag 'bootconfig-v7.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig updates from Masami Hiramatsu: - Update the bootconfig parser to stop searching for a value when it encounters a newline character - Update the tests for bootconfig parser to ensure the good examples to be parsed correctly by comparing the expected results * tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Check the parsed output of the good examples bootconfig: Terminate value search if it hits a newline
2026-02-13Merge tag 'platform-drivers-x86-v7.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: "Highlights: - amd/pmf: - Avoid overwriting BIOS input values when events occur rapidly - Fix PMF driver issues related to S4 (in part on crypto/ccp side) - Add NPU metrics API (for accel side consumers) - Allow disabling Smart PC function through a module parameter - asus-wmi & HID/asus: - Unification of backlight control (replaces quirks) - Support multiple interfaces for controlling keyboard/RGB brightness - Simplify init sequence - hp-wmi: - Add manual fan control for Victus S models - Add fan mode keep-alive - Fix platform profile values for Omen 16-wf1xxx - Add EC offset to get the thermal profile - intel/pmc: Show substate residencies also for non-primary PMCs - intel/ISST: - Store and restore data for all domains - Write interface improvements - lenovo-wmi: - Support multiple Capability Data - Add HWMON reporting and tuning support - mellanox/mlx-platform: Add HI173 & HI174 support - surface/aggregator_registry: Add Surface Pro 11 (QCOM) - thinkpad_acpi: Add support for HW damage detection capability - uniwill: Implement cTGP setting - wmi: - Introduce marshalling support - Convert a few drivers to use the new buffer-based WMI API - tools/power/x86/intel-speed-select: Allow read operations for non-root - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits) platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch. platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010 HID: asus: add support for the asus-wmi brightness handler platform/x86: asus-wmi: add keyboard brightness event handler platform/x86: asus-wmi: remove unused keyboard backlight quirk HID: asus: listen to the asus-wmi brightness device instead of creating one platform/x86: asus-wmi: Add support for multiple kbd led handlers HID: asus: early return for ROG devices HID: asus: move vendor initialization to probe HID: asus: fortify keyboard handshake HID: asus: use same report_id in response HID: asus: initialize additional endpoints only for certain devices HID: asus: simplify RGB init sequence platform/wmi: string-kunit: Add missing oversized string test case platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function platform/x86/uniwill: Implement cTGP setting platform/x86: uniwill-laptop: Introduce device descriptor system platform/x86/amd: Use scope-based cleanup for wbrf_record() ...
2026-02-13selftests/bpf: Add powerpc support for get_preempt_count() in selftestSaket Kumar Bhaskar
get_preempt_count() is enabled to return preempt_count for powerpc, so that bpf_in_interrupt()/bpf_in_nmi()/bpf_in_serving_softirq()/ bpf_in_task()/bpf_in_hardirq()/get_preempt_count() works for powerpc as well. Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Link: https://lore.kernel.org/r/20260212092558.370623-1-skb99@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13bpf: use reg->var_off instead of reg->off for pointersEduard Zingerman
This commit consolidates static and varying pointer offset tracking logic. All offsets are now represented solely using `.var_off` and min/max fields. The reasons are twofold: - This simplifies pointer tracking code, as each relevant function needs to check the `.var_off` field anyway. - It makes it easier to widen pointer registers for the purpose of loop convergence checks, by forgoing the `regsafe()` logic demanding `.off` fields to be identical. The changes are spread across many functions and are hard to group into smaller patches. Some of the logical changes include: - Checks in __check_ptr_off_reg() are reordered so that the tnum_is_const() check is done before operating on reg->var_off.value. - check_packet_access() now uses check_mem_region_access() to handle possible 'off' overflow cases. - In check_helper_mem_access() utility functions like check_packet_access() are now called with 'off=0', as these utility functions now account for the complete register offset range. - In check_reg_type() a call to __check_ptr_off_reg() is added before a call to btf_struct_ids_match(). This prevents btf_struct_ids_match() from potentially working on non-constant reg->var_off.value. - regsafe() is relaxed to avoid comparing '.off' field for pointers. As a precaution, the changes are verified in [1] by adding a pass checking that no pointer has non-zero '.off' field on each do_check_insn() iteration. [1] https://github.com/eddyz87/bpf/tree/ptrs-off-migration Notable selftests changes: - `.var_off` value changed because it now combines static and varying offsets. Affected tests: - linked_list/incorrect_node_var_off - linked_list/incorrect_head_var_off2 - verifier_align/packet_variable_offset - Overflowing `smax_value` bound leads to a pointer with big negative or positive offset to be rejected immediately (previously overflowing `rX += const` instruction updated `.off` field avoiding the overflow). Affected tests: - verifier_align/dubious_pointer_arithmetic - verifier_bounds/var_off_insn_off_test1 - Invalid access to packet now reports full offset inside a packet. Affected tests: - verifier_direct_packet_access/test23_x_pkt_ptr_4 - A change in check_mem_region_access() behavior: when register `.smin_value` is negative, it reports "rX min value is negative..." before calling into __check_mem_access() which reports "invalid access to ...". In the tests below, the `.off` field was negative, while `.smin_value` remained positive. This is no longer the case after the changes in this commit. Affected tests: - verifier_gotox/jump_table_invalid_mem_acceess_neg - verifier_helper_packet_access/test15_cls_helper_fail_sub - verifier_helper_value_access/imm_out_of_bound_2 - verifier_helper_value_access/reg_out_of_bound_2 - verifier_meta_access/meta_access_test2 - verifier_value_ptr_arith/known_scalar_from_different_maps - lower_oob_arith_test_1 - value_ptr_known_scalar_3 - access_value_ptr_known_scalar - Usage of check_mem_region_access() instead of __check_mem_access() in check_packet_access() changes the reported message from "rX offset is outside ..." to "rX min/max value is outside ...". Affected tests: - verifier_xdp_direct_packet_access/* - In check_func_arg_reg_off() the check for zero offset now operates on `.var_off` field instead of `.off` field. For tests where the pattern looks like `kfunc(reg_with_var_off, ...)`, this changes the reported error: - previously the error "variable ... access ... disallowed" was reported by __check_ptr_off_reg(); - now "R1 must have zero offset ..." is reported by check_func_arg_reg_off() itself. Affected tests: - verifier/calls.c "calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset" Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-2-00820e4d3438@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13selftests/bpf: enable fsession_test on riscv64Menglong Dong
Now that the RISC-V trampoline JIT supports BPF_TRACE_FSESSION, run the fsession selftest on riscv64 as well as x86_64. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Tested-by: Björn Töpel <bjorn@kernel.org> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/r/20260208053311.698352-4-dongml2@chinatelecom.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13selftests/bpf: Fix map_kptr grace period waitKumar Kartikeya Dwivedi
Commit c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast") broke map_kptr selftest since it removed the function we were kprobing. Use a new kfunc that invokes call_rcu_tasks_trace and sets a program provided pointer to an integer to 1. Technically this can be unsafe if the memory being written to from the callback disappears, but this is just for usage in a test where we ensure we spin until we see the value to be set to 1, so it's ok. Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Fixes: c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20260211185747.3630539-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13selftests/bpf: Adjust selftest due to function renameIhor Solodrai
do_filp_open() was renamed in commit 541003b576c3 ("rename do_filp_open() to do_file_open()") This broke test_profiler, because it uses a kretprobe on that function. Fix it by renaming accordingly. Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Closes: https://lore.kernel.org/bpf/djwjf2vfb7gro3rfag666bojod6ytcectahnb5z6hx2hawimtj@sx47ghzjg4lw/ Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260210235855.215679-1-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13libbpf: Fix invalid write loop logic in bpf_linker__add_buf()Amery Hung
Fix bpf_linker__add_buf()'s logic of copying data from memory buffer into memfd. In the event of short write not writing entire buf_sz bytes into memfd file, we'll append bytes from the beginning of buf *again* (corrupting ELF file contents) instead of correctly appending the rest of not-yet-read buf contents. Closes: https://github.com/libbpf/libbpf/issues/945 Fixes: 6d5e5e5d7ce1 ("libbpf: Extend linker API to support in-memory ELF files") Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20260209230134.3530521-1-ameryhung@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13libbpf: Add gating for arena globals relocation featureEmil Tsalapatis
Add feature gating for the arena globals relocation introduced in commit c1f61171d44b. The commit depends on a previous commit in the same patchset that is absent from older kernels (12a1fe6e12db "bpf/verifier: Do not limit maximum direct offset into arena map"). Without this commit, arena globals relocation with arenas >= 512MiB fails to load and breaks libbpf's backwards compatibility. Introduce a libbpf feature to check whether the running kernel allows for full range ldimm64 offset, and only relocate arena globals if it does. Fixes: c1f61171d44b ("libbpf: Move arena globals to the end of the arena") Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260210184532.255475-1-emil@etsalapatis.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13selftests/bpf: Migrate align.c tests to test_loader frameworkEduard Zingerman
While working on pointer tracking changes I found it necessary to update expected log messages in align.c series of tests. As a preliminary step, migrate these tests to test_loader framework. The tests in question load BPF program and check if expected log is produced, the log is specified as: .matches = { ... {4, "R3", "32"}, ... } Where: - '4' is an *instruction number* (contrary to the field name in struct bpf_reg_match). - 'R3' is the name of the register to check. - '32' is the value expected for this register. Mimic the same logic using __msg macro. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260211051310.2782558-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-13selftests: netconsole: Increase port listening timeoutPin-yen Lin
wait_for_port() can wait up to 2 seconds with the sleep and the polling in wait_local_port_listen() combined. So, in netcons_basic.sh, the socat process could die before the test writes to the netconsole. Increase the timeout to 3 seconds to make netcons_basic.sh pass consistently. Fixes: 3dc6c76391cb ("selftests: net: Add IPv6 support to netconsole basic tests") Signed-off-by: Pin-yen Lin <treapking@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260210005939.3230550-1-treapking@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-13tools/power turbostat: version 2026.02.14Len Brown
Since release 2025.12.02: Add L2 statistics columns for recent Intel processors: L2MRPS = L2 Cache M-References Per Second L2%hit = L2 Cache Hit % Sort work and output by cpu# rather than core# This commit: Version number and white space (indent -l160) No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Fix and document --header_iterationsLen Brown
The "header_iterations" option is commonly used to de-clutter the screen of redundant header label rows in an interactive session: Eg. every 10 rows: $ sudo turbostat --header_iterations 10 -S -q -i 1 But --header_iterations was missing from turbostat.8 Also turbostat help advertised the "-N" short option that did not actually work: $ turbostat --help -N, --header_iterations num print header every num iterations Repair "-N" Document "--header_iterations" on turbostat.8 Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Use strtoul() for iteration parsingKaushlendra Kumar
Replace strtod() with strtoul() and check errno for -n/-N options, since num_iterations and header_iterations are unsigned long counters. Reject zero and conversion errors; negative inputs wrap to large positive values per standard unsigned semantics. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Favor cpu# over core#Len Brown
Turbostat collects statistics and outputs results in "topology order", which means it prioritizes the core# over the cpu#. The strategy is to minimize wakesups to a core -- which is important when measuring an idle system. But core order is problematic, because Linux core#'s are physical (within each package), and thus subject to APIC-id scrambling that may be done by the hardware or the BIOS. As a result users may be are faced with rows in a confusing order: sudo turbostat -q --show topology,Busy%,CPU%c6,UncMHz sleep 1 Core CPU Busy% CPU%c6 UncMHz - - 1.25 72.18 3400 0 4 7.74 0.00 1 5 1.77 88.59 2 6 0.48 96.73 3 7 0.21 98.34 4 8 0.14 96.85 5 9 0.26 97.55 6 10 0.44 97.24 7 11 0.12 96.18 8 0 5.41 0.31 3400 8 1 0.19 12 2 0.41 0.22 12 3 0.08 32 12 0.04 99.21 33 13 0.25 94.92 Abandon the legacy "core# topology order" in favor of simply ordering by cpu#, with a special case to handle HT siblings that may not have adjacent cpu#'s. sudo ./turbostat -q --show topology,Busy%,CPU%c6,UncMHz sleep 1 1.003001 sec Core CPU Busy% CPU%c6 UncMHz - - 1.38 80.55 1600 8 0 10.94 0.00 1600 8 1 0.53 12 2 2.90 0.45 12 3 0.11 0 4 1.96 91.20 1 5 0.97 96.40 2 6 0.24 94.72 3 7 0.31 98.01 4 8 0.20 98.20 5 9 0.62 96.00 6 10 0.06 98.15 7 11 0.12 99.31 32 12 0.04 99.07 33 13 0.27 95.09 The result is that cpu#'s now take precedence over core#'s. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Loongarch: - Add more CPUCFG mask bits - Improve feature detection - Add lazy load support for FPU and binary translation (LBT) register state - Fix return value for memory reads from and writes to in-kernel devices - Add support for detecting preemption from within a guest - Add KVM steal time test case to tools/selftests ARM: - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers - More pKVM fixes for features that are not supposed to be exposed to guests - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest - Preliminary work for guest GICv5 support - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures - A small set of FPSIMD cleanups - Selftest fixes addressing the incorrect alignment of page allocation - Other assorted low-impact fixes and spelling fixes RISC-V: - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Transparent huge page support for hypervisor page tables - Adjust the number of available guest irq files based on MMIO register sizes found in the device tree or the ACPI tables - Add RISC-V specific paging modes to KVM selftests - Detect paging mode at runtime for selftests s390: - Performance improvement for vSIE (aka nested virtualization) - Completely new memory management. s390 was a special snowflake that enlisted help from the architecture's page table management to build hypervisor page tables, in particular enabling sharing the last level of page tables. This however was a lot of code (~3K lines) in order to support KVM, and also blocked several features. The biggest advantages is that the page size of userspace is completely independent of the page size used by the guest: userspace can mix normal pages, THPs and hugetlbfs as it sees fit, and in fact transparent hugepages were not possible before. It's also now possible to have nested guests and guests with huge pages running on the same host - Maintainership change for s390 vfio-pci - Small quality of life improvement for protected guests x86: - Add support for giving the guest full ownership of PMU hardware (contexted switched around the fastpath run loop) and allowing direct access to data MSRs and PMCs (restricted by the vPMU model). KVM still intercepts access to control registers, e.g. to enforce event filtering and to prevent the guest from profiling sensitive host state. This is more accurate, since it has no risk of contention and thus dropped events, and also has significantly less overhead. For more information, see the commit message for merge commit bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...") - Disallow changing the virtual CPU model if L2 is active, for all the same reasons KVM disallows change the model after the first KVM_RUN - Fix a bug where KVM would incorrectly reject host accesses to PV MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled, even if those were advertised as supported to userspace, - Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs, where KVM would attempt to read CR3 configuring an async #PF entry - Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Only a few exports that are intended for external usage, and those are allowed explicitly - When checking nested events after a vCPU is unblocked, ignore -EBUSY instead of WARNing. Userspace can sometimes put the vCPU into what should be an impossible state, and spurious exit to userspace on -EBUSY does not really do anything to solve the issue - Also throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is in Wait-For-SIPI, which also resulted in playing whack-a-mole with syzkaller stuffing architecturally impossible states into KVM - Add support for new Intel instructions that don't require anything beyond enumerating feature flags to userspace - Grab SRCU when reading PDPTRs in KVM_GET_SREGS2 - Add WARNs to guard against modifying KVM's CPU caps outside of the intended setup flow, as nested VMX in particular is sensitive to unexpected changes in KVM's golden configuration - Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts when the suppression feature is enabled by the guest (currently limited to split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an option as some userspaces have come to rely on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective of whether or not userspace I/O APIC supports Directed EOIs) - Clean up KVM's handling of marking mapped vCPU pages dirty - Drop a pile of *ancient* sanity checks hidden behind in KVM's unused ASSERT() macro, most of which could be trivially triggered by the guest and/or user, and all of which were useless - Fold "struct dest_map" into its sole user, "struct rtc_status", to make it more obvious what the weird parameter is used for, and to allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n - Bury all of ioapic.h, i8254.h and related ioctls (including KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y - Add a regression test for recent APICv update fixes - Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv() to consolidate the updates, and to co-locate SVI updates with the updates for KVM's own cache of ISR information - Drop a dead function declaration - Minor cleanups x86 (Intel): - Rework KVM's handling of VMCS updates while L2 is active to temporarily switch to vmcs01 instead of deferring the update until the next nested VM-Exit. The deferred updates approach directly contributed to several bugs, was proving to be a maintenance burden due to the difficulty in auditing the correctness of deferred updates, and was polluting "struct nested_vmx" with a growing pile of booleans - Fix an SGX bug where KVM would incorrectly try to handle EPCM page faults, and instead always reflect them into the guest. Since KVM doesn't shadow EPCM entries, EPCM violations cannot be due to KVM interference and can't be resolved by KVM - Fix a bug where KVM would register its posted interrupt wakeup handler even if loading kvm-intel.ko ultimately failed - Disallow access to vmcb12 fields that aren't fully supported, mostly to avoid weirdness and complexity for FRED and other features, where KVM wants enable VMCS shadowing for fields that conditionally exist - Print out the "bad" offsets and values if kvm-intel.ko refuses to load (or refuses to online a CPU) due to a VMCS config mismatch x86 (AMD): - Drop a user-triggerable WARN on nested_svm_load_cr3() failure - Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS relies on an upcoming, publicly announced change in the APM to reduce the set of conditions where hardware (i.e. KVM) *must* flush the RAP - Ignore nSVM intercepts for instructions that are not supported according to L1's virtual CPU model - Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath for EPT Misconfig - Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM, and allow userspace to restore nested state with GIF=0 - Treat exit_code as an unsigned 64-bit value through all of KVM - Add support for fetching SNP certificates from userspace - Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD or VMSAVE on behalf of L2 - Misc fixes and cleanups x86 selftests: - Add a regression test for TPR<=>CR8 synchronization and IRQ masking - Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support, and extend x86's infrastructure to support EPT and NPT (for L2 guests) - Extend several nested VMX tests to also cover nested SVM - Add a selftest for nested VMLOAD/VMSAVE - Rework the nested dirty log test, originally added as a regression test for PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage and to hopefully make the test easier to understand and maintain guest_memfd: - Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage handling. SEV/SNP was the only user of the tracking and it can do it via the RMP - Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to avoid non-trivial complexity for something that no known VMM seems to be doing and to avoid an API special case for in-place conversion, which simply can't support unaligned sources - When populating guest_memfd memory, GUP the source page in common code and pass the refcounted page to the vendor callback, instead of letting vendor code do the heavy lifting. Doing so avoids a looming deadlock bug with in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap invalidate lock Generic: - Fix a bug where KVM would ignore the vCPU's selected address space when creating a vCPU-specific mapping of guest memory. Actually this bug could not be hit even on x86, the only architecture with multiple address spaces, but it's a bug nevertheless" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits) KVM: s390: Increase permitted SE header size to 1 MiB MAINTAINERS: Replace backup for s390 vfio-pci KVM: s390: vsie: Fix race in acquire_gmap_shadow() KVM: s390: vsie: Fix race in walk_guest_tables() KVM: s390: Use guest address to mark guest page dirty irqchip/riscv-imsic: Adjust the number of available guest irq files RISC-V: KVM: Transparent huge page support RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test RISC-V: KVM: Allow Zalasr extensions for Guest/VM KVM: riscv: selftests: Add riscv vm satp modes KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr() RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr() RISC-V: KVM: Remove unnecessary 'ret' assignment KVM: s390: Add explicit padding to struct kvm_s390_keyop KVM: LoongArch: selftests: Add steal time test case LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side LoongArch: KVM: Add paravirt preempt feature in hypervisor side ...
2026-02-13selftests/sched_ext: Fix rt_stall flaky failureIhor Solodrai
The rt_stall test measures the runtime ratio between an EXT and an RT task pinned to the same CPU, verifying that the deadline server prevents RT tasks from starving SCHED_EXT tasks. It expects the EXT task to get at least 4% of CPU time. The test is flaky because sched_stress_test() calls sleep(RUN_TIME) immediately after fork(), without waiting for the RT child to complete its setup (set_affinity + set_sched). If the RT child experiences scheduling latency before completing setup, that delay eats into the measurement window: the RT child runs for less than RUN_TIME seconds, and the EXT task's measured ratio drops below the 4% threshold. For example, in the failing CI run [1]: EXT=0.140s RT=4.750s total=4.890s (expected ~5.0s) ratio=2.86% < 4% → FAIL The 110ms gap (5.0 - 4.89) corresponds to the RT child's setup time being counted inside the measurement window, during which fewer deadline server ticks fire for the EXT task. Fix by using pipes to synchronize: each child signals the parent after completing its setup, and the parent waits for both signals before starting sleep(RUN_TIME). This ensures the measurement window only counts time when both tasks are fully configured and competing. [1] https://github.com/kernel-patches/bpf/actions/runs/21961895809/job/63442490449 Fixes: be621a76341c ("selftests/sched_ext: Add test for sched_ext dl_server") Assisted-by: claude-opus-4-6-v1 Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Reviewed-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-02-13tools/power turbostat: Expunge logical_cpu_idLen Brown
There is only once cpu_id name space -- cpu_id. Expunge the term logical_cpu_id. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Enhance HT enumerationLen Brown
Record the cpu_id of each CPU HT sibling -- will need this later. Rename "thread_id" to "ht_id" to disambiguate that the scope of this id is within a Core -- it is not a global cpu_id. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Simplify global core_id calculationLen Brown
Standardize the generation of globally unique core_id's in a macro, and simplify the related code. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Unify even/odd/average counter referencingLen Brown
Update the syntax of accesses to the even and odd counters to match the average counters. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Allocate average counters dynamicallyLen Brown
The current static definition of average{} is inconsistent with the dynamically allocated even{} and odd{} counters. Allocate average{} counters dynamically. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Delete core_data.core_idLen Brown
Delete redundant core_data.core_id. Use cpus[].core_id as the single copy of the truth. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Rename physical_core_id to core_idLen Brown
The Linux Kernel topology sysfs is flawed. core_id is not globally unique, but is per-package. Turbostat works around this when it needs to, with rapl_core_id = cpus[cpu].core_id; rapl_core_id += cpus[cpu].package_id * nr_cores_per_package Otherwise, turbostat handles core_id as subservient to each package. As there is only one core_id namespace, rename physical_core_id to simply be core_id. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Cleanup package_idLen Brown
The kernel topology sysfs uses the name "physical_package_id" because it is allowed to be sparse. Inside Turbostat, that physical package_id namespace is the only package_id namespace, so re-name it to simply be "package_id" in cpus[]. Delete the redundant copy of package_id in pkg_data. Rely instead on the single copy of the truth in cpus[]. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Cleanup internal use of "base_cpu"Len Brown
Disambiguate the uses "base_cpu": master_cpu: lowest permitted cpu#, read global MSRs here package_data.first_cpu: lowest permitted cpu# in that package core_data.first_cpu: lowest permitted cpu# in the core current_cpu: where I'm running now No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-13tools/power turbostat: Add L2 cache statisticsLen Brown
version 2026.02.04 Add support for L2 cache statistics: L2MRPS and L2%hit L2 statistics join the LLC in the "cache" counter group. While the underlying LLC perf kernel support was architectural, L2 perf counters are model-specific: Support Intel Xeon -- Sapphire Rapids and newer. Support Intel Atom -- Gracemont and newer. Support Intel Hybrid -- Alder Lake and newer. Example: alder-lake-n$ sudo turbostat --quiet --show CPU,Busy%,cache my_workload CPU Busy% LLCMRPS LLC%hit L2MRPS L2%hit - 49.82 1210 85.02 2909 31.63 0 99.14 322 88.89 767 32.38 1 0.91 1 32.47 1 18.86 2 0.20 0 40.78 0 23.34 3 99.17 295 81.79 706 31.89 4 0.68 1 58.71 1 15.61 5 99.16 299 85.65 726 31.32 6 0.08 0 45.35 0 31.71 7 99.21 293 83.63 707 30.92 where "my_workload" is a wrapper for a yogini workload that has 4 fully-busy threads with 2MB working set each. Note that analogous to the system summary for multiple LLC systems, the system summary row for the L2 is the aggregate of all CPUS in the system -- there is no per-cache roll-up. Signed-off-by: Len Brown <len.brown@intel.com>
2026-02-12Merge tag 'riscv-for-linus-7.0-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: - Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() * tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) riscv: lib: optimize strlen loop efficiency selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function selftests: riscv: verify ptrace accepts valid vector csr values selftests: riscv: verify ptrace rejects invalid vector csr inputs selftests: riscv: verify syscalls discard vector context selftests: riscv: verify initial vector state with ptrace selftests: riscv: test ptrace vector interface riscv: ptrace: validate input vector csr registers riscv: csr: define vtype register elements riscv: vector: init vector context with proper vlenb riscv: ptrace: return ENODATA for inactive vector extension kselftest/riscv: add kselftest for user mode CFI riscv: add documentation for shadow stack riscv: add documentation for landing pad / indirect branch tracking riscv: create a Kconfig fragment for shadow stack and landing pad support arch/riscv: add dual vdso creation logic and select vdso based on hw arch/riscv: compile vdso with landing pad and shadow stack note riscv: enable kernel access to shadow stack memory via the FWFT SBI call riscv: add kernel command line option to opt out of user CFI riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe ...
2026-02-12selftests: drv-net: limit RPS test CPUs to supported rangeGal Pressman
The _get_unused_cpus() function can return CPU numbers >= 16, which exceeds RPS_MAX_CPUS in toeplitz.c. When this happens, the test fails with a cryptic message: # Exception| Traceback (most recent call last): # Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/ksft.py", line 319, in ksft_run # Exception| func(*args) # Exception| File "/tmp/cur/linux/tools/testing/selftests/drivers/net/hw/toeplitz.py", line 189, in test # Exception| with bkg(" ".join(rx_cmd), ksft_ready=True, exit_wait=True) as rx_proc: # Exception| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 124, in __init__ # Exception| super().__init__(comm, background=True, # Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 77, in __init__ # Exception| raise Exception("Did not receive ready message") # Exception| Exception: Did not receive ready message Rename _get_unused_cpus() to _get_unused_rps_cpus() and cap the CPU search range to RPS_MAX_CPUS. Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260210093110.1935149-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-12selftests: net: lib: Fix jq parsing errorYue Haibing
The testcase failed as below: $./vlan_bridge_binding.sh ... + adf_ip_link_set_up d1 + local name=d1 + shift + ip_link_is_up d1 + ip_link_has_flag d1 UP + local name=d1 + shift + local flag=UP + shift ++ ip -j link show d1 ++ jq --arg flag UP 'any(.[].flags.[]; . == $flag)' jq: error: syntax error, unexpected '[', expecting FORMAT or QQSTRING_START (Unix shell quoting issues?) at <top-level>, line 1: any(.[].flags.[]; . == $flag) jq: 1 compile error Remove the extra dot (.) after flags array to fix this. Fixes: 4baa1d3a5080 ("selftests: net: lib: Add ip_link_has_flag()") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260211022146.190948-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-12selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2Ido Schimmel
As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-12tools/testing: keep legacy generated files around in .gitignore fileLinus Torvalds
People keep removing generated files from .gitignore files even when the files stay around. Please don't do that: just because the file is no longer being generated doesn't make it magically go away, and doesn't make it suddenly be something that should now not be ignored any more. Fixes: dd2c6ec24fca ("selftests/mm: remove virtual_address_range test") Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: SeongJae Park <sj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-12Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds
Pull CXL updates from Dave Jiang: - Introduce cxl_memdev_attach and pave way for soft reserved handling, type2 accelerator enabling, and LSA 2.0 enabling. All these series require the endpoint driver to settle before continuing the memdev driver probe. - Address CXL port error protocol handling and reporting. The large patch series was split into three parts. The first two parts are included here with the final part coming later. The first part consists of a series of code refactoring to PCI AER sub-system that addresses CXL and also CXL RAS code to prepare for port error handling. The second part refactors the CXL code to move management of component registers to cxl_port objects to allow all CXL AER errors to be handled through the cxl_port hierarchy. - Provide AMD Zen5 platform address translation for CXL using ACPI PRMT. This includes a conventions document to explain why this is needed and how it's implemented. - Misc CXL patches of fixes, cleanups, and updates. Including CXL address translation for unaligned MOD3 regions. [ TLA service: CXL is "Compute Express Link" ] * tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits) cxl: Disable HPA/SPA translation handlers for Normalized Addressing cxl/region: Factor out code into cxl_region_setup_poison() cxl/atl: Lock decoders that need address translation cxl: Enable AMD Zen5 address translation using ACPI PRMT cxl/acpi: Prepare use of EFI runtime services cxl: Introduce callback for HPA address ranges translation cxl/region: Use region data to get the root decoder cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos() cxl/region: Separate region parameter setup and region construction cxl: Simplify cxl_root_ops allocation and handling cxl/region: Store HPA range in struct cxl_region cxl/region: Store root decoder in struct cxl_region cxl/region: Rename misleading variable name @hpa to @hpa_range Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement cxl, doc: Moving conventions in separate files cxl, doc: Remove isonum.txt inclusion cxl/port: Unify endpoint and switch port lookup cxl/port: Move endpoint component register management to cxl_port cxl/port: Map Port RAS registers cxl/port: Move dport RAS setup to dport add time ...
2026-02-12Merge tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: "A small cycle with the bulk in selftests and reintroducing poison handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and some dmabuf structure consolidation. - Update outdated mdev comment referencing the renamed mdev_type_add() function (Julia Lawall) - Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex Mastro) - Relax selftest assertion relative to differences in huge page handling between legacy (v1) TYPE1 IOMMU mapping behavior and the compatibility mode supported by IOMMUFD (David Matlack) - Reintroduce memory poison handling support for non-struct-page- backed memory in the nvgrace-gpu variant driver (Ankit Agrawal) - Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure and semantics (Leon Romanovsky) - Add missing upstream bridge locking across PCI function reset, resolving an assertion failure when secondary bus reset is used to provide that reset (Anthony Pighin) - Fixes to hisi_acc vfio-pci variant driver to resolve corner case issues related to resets, repeated migration, and error injection scenarios (Longfang Liu, Weili Qian) - Restrict vfio selftest builds to arm64 and x86_64, resolving compiler warnings on 32-bit archs (Ted Logan) - Un-deprecate the fsl-mc vfio bus driver as a new maintainer has stepped up (Ioana Ciornei)" * tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio: vfio/fsl-mc: add myself as maintainer vfio: selftests: only build tests on arm64 and x86_64 hisi_acc_vfio_pci: fix the queue parameter anomaly issue hisi_acc_vfio_pci: resolve duplicate migration states hisi_acc_vfio_pci: update status after RAS error hisi_acc_vfio_pci: fix VF reset timeout issue vfio/pci: Lock upstream bridge for vfio_pci_core_disable() types: reuse common phys_vec type instead of DMABUF open‑coded variant vfio/nvgrace-gpu: register device memory for poison handling mm: add stubs for PFNMAP memory failure registration functions vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU vfio: selftests: Add vfio_dma_mapping_mmio_test vfio: selftests: Align BAR mmaps for efficient IOMMU mapping vfio: selftests: Centralize IOMMU mode name definitions vfio/mdev: update outdated comment
2026-02-12selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONTAristeu Rozanski
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT In order to synchronize new processes to test inheritance of memfd_noexec sysctl, memfd_test sets up the sysctl with a value before creating the new process. The new process then sends itself a SIGSTOP in order to wait for the parent to flip the sysctl value and send a SIGCONT signal. This would work as intended if it wasn't the fact that the new process is being created with CLONE_NEWPID, which creates a new PID namespace and the new process has PID 1 in this namespace. There're restrictions on sending signals to PID 1 and, although it's relaxed for other than root PID namespace, it's biting us here. In this specific case the SIGSTOP sent by the new process is ignored (no error to kill() is returned) and it never stops its execution. This is usually not noticiable as the parent usually manages to set the new sysctl value before the child has a chance to run and the test succeeds. But if you run the test in a loop, it eventually reproduces: while [ 1 ]; do ./memfd_test >log 2>&1 || break; done; cat log So this patch replaces the SIGSTOP/SIGCONT synchronization with IPC semaphore. Link: https://lkml.kernel.org/r/a7776389-b3d6-4b18-b438-0b0e3ed1fd3b@work Fixes: 6469b66e3f5a ("selftests: improve vm.memfd_noexec sysctl tests") Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Shuah Khan <shuah@kernel.org> Cc: liuye <liuye@kylinos.cn> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12delayacct: fix build regression on accounting toolArnd Bergmann
The accounting tool was modified for the original ABI using a custom 'timespec64' type in linux/taskstats.h, which I changed to use the regular __kernel_timespec type, causing a build failure: getdelays.c:202:45: warning: 'struct timespec64' declared inside parameter list will not be visible outside of this definition or declaration 202 | static const char *format_timespec64(struct timespec64 *ts) | ^~~~~~~~~~ Change the tool to match the updated header. Link: https://lkml.kernel.org/r/20260210103427.2984963-1-arnd@kernel.org Fixes: 503efe850c74 ("delayacct: add timestamp of delay max") Fixes: f06e31eef4c1 ("delayacct: fix uapi timespec64 definition") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202602091611.lxgINqXp-lkp@intel.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12selftests/mm: add memory failure dirty pagecache testMiaohe Lin
This patch adds a new testcase to validate memory failure handling for dirty pagecache. This performs similar operations as clean pagecaches except fsync() is not used to keep pages dirty. This test helps ensure that memory failure handling for dirty pagecache works correctly, including proper SIGBUS delivery, page isolation, and recovery paths. Link: https://lkml.kernel.org/r/20260206031639.2707102-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@kernel.org> Cc: kernel test robot <lkp@intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12selftests/mm: add memory failure clean pagecache testMiaohe Lin
This patch adds a new testcase to validate memory failure handling for clean pagecache. This test performs similar operations as anonymous pages except allocating memory using mmap() with a file fd. This test helps ensure that memory failure handling for clean pagecache works correctly, including unchanged page content, page isolation, and recovery paths. Link: https://lkml.kernel.org/r/20260206031639.2707102-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601221142.mDWA1ucw-lkp@intel.com/ Cc: David Hildenbrand <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12selftests/mm: add memory failure anonymous page testMiaohe Lin
Patch series "selftests/mm: add memory failure selftests", v4. Introduce selftests to validate the functionality of memory failure. These tests help ensure that memory failure handling for anonymous pages, pagecaches pages works correctly, including proper SIGBUS delivery to user processes, page isolation, and recovery paths. Currently madvise syscall is used to inject memory failures. And only anonymous pages and pagecaches are tested. More test scenarios, e.g. hugetlb, shmem, thp, will be added. Also more memory failure injecting methods will be supported, e.g. APEI Error INJection, if required. This patch (of 3): This patch adds a new kselftest to validate memory failure handling for anonymous pages. The test performs the following operations: 1. Allocates anonymous pages using mmap(). 2. Injects memory failure via madvise syscall. 3. Verifies expected error handling behavior. 4. Unpoison memory. This test helps ensure that memory failure handling for anonymous pages works correctly, including proper SIGBUS delivery to user processes, page isolation and recovery paths. Link: https://lkml.kernel.org/r/20260206031639.2707102-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20260206031639.2707102-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12tools/testing/vma: add VMA userland tests for VMA flag functionsLorenzo Stoakes
Now we have the capability to test the new helpers for the bitmap VMA flags in userland, do so. We also update the Makefile such that both VMA (and while we're here) mm_struct flag sizes can be customised on build. We default to 128-bit to enable testing of flags above word size even on 64-bit systems. We add userland tests to ensure that we do not regress VMA flag behaviour with the introduction when using bitmap VMA flags, nor accidentally introduce unexpected results due to for instance higher bit values not being correctly cleared/set. As part of this change, make __mk_vma_flags() a custom function so we can handle specifying invalid VMA bits. This is purposeful so we can have the VMA tests work at lower and higher number of VMA flags without having to duplicate code too much. Link: https://lkml.kernel.org/r/7fe6afe9c8c61e4d3cfc9a2d50a5d24da8528e68.1769097829.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Yury Norov <ynorov@nvidia.com> Cc: Chris Mason <clm@fb.com> Cc: Pedro Falcato <pfalcato@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12tools/testing/vma: separate out vma_internal.h into logical headersLorenzo Stoakes
The vma_internal.h file is becoming entirely unmanageable. It combines duplicated kernel implementation logic that needs to be kept in-sync with the kernel, stubbed out declarations that we simply ignore for testing purposes and custom logic added to aid testing. If we separate each of the three things into separate headers it makes things far more manageable, so do so: * include/stubs.h contains the stubbed declarations, * include/dup.h contains the duplicated kernel declarations, and * include/custom.h contains declarations customised for testing. [lorenzo.stoakes@oracle.com: avoid a duplicate struct define] Link: https://lkml.kernel.org/r/1e032732-61c3-485c-9aa7-6a09016fefc1@lucifer.local Link: https://lkml.kernel.org/r/dd57baf5b5986cb96a167150ac712cbe804b63ee.1769097829.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Yury Norov <ynorov@nvidia.com> Cc: Chris Mason <clm@fb.com> Cc: Pedro Falcato <pfalcato@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-02-12tools/testing/vma: separate VMA userland tests into separate filesLorenzo Stoakes
So far the userland VMA tests have been established as a rough expression of what's been possible. Adapt it into a more usable form by separating out tests and shared helper functions. Since we test functions that are declared statically in mm/vma.c, we make use of the trick of #include'ing kernel C files directly. In order for the tests to continue to function, we must therefore also this way into the tests/ directory. We try to keep as much shared logic actually modularised into a separate compilation unit in shared.c, however the merge_existing() and attach_vma() helpers rely on statically declared mm/vma.c functions so these must be declared in main.c. Link: https://lkml.kernel.org/r/a0455ccfe4fdcd1c962c64f76304f612e5662a4e.1769097829.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Yury Norov <ynorov@nvidia.com> Cc: Chris Mason <clm@fb.com> Cc: Pedro Falcato <pfalcato@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-20 11:48:58 +0000