| Age | Commit message (Collapse) | Author |
|---|
|
The implementation of `page_align()` in `processor.c` calculates
alignment incorrectly for values that are already aligned. Specifically,
`(v + vm->page_size) & ~(vm->page_size - 1)` aligns to the *next* page
boundary even if `v` is already page-aligned, potentially wasting a page
of memory.
Fix the calculation to use standard alignment logic: `(v + vm->page_size
- 1) & ~(vm->page_size - 1)`.
Fixes: 7a6629ef746d ("kvm: selftests: add virt mem support for aarch64")
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM selftests map all guest code and data into the lower virtual address
range (0x0000...) managed by TTBR0_EL1. The upper range (0xFFFF...)
managed by TTBR1_EL1 is unused and uninitialized.
If a guest accesses the upper range, the MMU attempts a translation
table walk using uninitialized registers, leading to unpredictable
behavior.
Set `TCR_EL1.EPD1` to disable translation table walks for TTBR1_EL1,
ensuring that any access to the upper range generates an immediate
Translation Fault. Additionally, set `TCR_EL1.TBI1` (Top Byte Ignore) to
ensure that tagged pointers in the upper range also deterministically
trigger a Translation Fault via EPD1.
Define `TCR_EPD1_MASK`, `TCR_EPD1_SHIFT`, and `TCR_TBI1` in
`processor.h` to support this configuration. These are based on their
definitions in `arch/arm64/include/asm/pgtable-hwdef.h`.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a very basic test checking that FEAT_IDST actually works for
the {GMID,SMIDR,CSSIDR2}_EL1 registers.
Link: https://patch.msgid.link/20260108173233.2911955-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
With the introduction of the OMR feature, the PEBS memory auxiliary info
field for load and store latency events has been restructured for DMR.
The memory auxiliary info field's bit[8] indicates whether a L2 cache
miss occurred for a memory load or store instruction. If bit[8] is 0,
it signifies no L2 cache miss, and bits[7:0] specify the exact cache data
source (up to the L2 cache level). If bit[8] is 1, bits[7:0] represent
the OMR encoding, indicating the specific L3 cache or memory region
involved in the memory access. A significant enhancement is OMR encoding
provides up to 8 fine-grained memory regions besides the cache region.
A significant enhancement for OMR encoding is the ability to provide
up to 8 fine-grained memory regions in addition to the cache region,
offering more detailed insights into memory access regions.
For detailed information on the memory auxiliary info encoding, please
refer to section 16.2 "PEBS LOAD LATENCY AND STORE LATENCY FACILITY" in
the ISE documentation.
This patch ensures that the PEBS memory auxiliary info field is correctly
interpreted and utilized in DMR.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-3-dapeng1.mi@linux.intel.com
|
|
Commit 66bce7afbaca ("selftests/mm: fix test result reporting in
gup_longterm") introduced a small bug causing unknown filesystems to
always result in a test failure.
This is because do_test() was updated to use a common reporting path, but
this case appears to have been missed.
This is problematic for e.g. virtme-ng which uses an overlayfs file
system, causing gup_longterm to appear to fail each time due to a test
count mismatch:
# Planned tests != run tests (50 != 46)
# Totals: pass:24 fail:0 xfail:0 xpass:0 skip:22 error:0
The fix is to simply change the return into a break.
Link: https://lkml.kernel.org/r/20260106154547.214907-1-lorenzo.stoakes@oracle.com
Fixes: 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we correctly handle forked faulted/unfaulted merge on mremap(),
exhaustively assert that we handle this correctly.
Do this in the less duplicative way by adding a new merge_with_fork
fixture and forked/unforked variants, and abstract the forking logic as
necessary to avoid code duplication with this also.
Link: https://lkml.kernel.org/r/1daf76d89fdb9d96f38a6a0152d8f3c2e9e30ac7.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Test that mremap()'ing a VMA into a position such that the target VMA on
merge is unfaulted and the source faulted is correctly performed.
We cover 4 cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
target = prev, expand prev to cover.
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
target = next, expand next to cover.
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover.
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover. Essentially equivalent to 3, but
with additional requirement that next's anon_vma is the same as the
copied VMA's.
Each of these are performed with MREMAP_DONTUNMAP set, which will cause a
KASAN assert for UAF or an assert on zero refcount anon_vma if a bug
exists with correctly propagating anon_vma state in each scenario.
Link: https://lkml.kernel.org/r/f903af2930c7c2c6e0948c886b58d0f42d8e8ba3.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a test which checks that the destination register of a gotox
instruction is marked as used and that the union of jump targets
is considered as live.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the config attribute that's published by the driver instead of
hard coding "attr.config".
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These instances of hard coded config attributes are used for configuring
and validating the event options. Use the config attribute that's
published by the driver by replacing the open coded operations with
evsel__get_config_val() and evsel__set_config_if_unset().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf only looks at attr.config when determining what was programmed into
TRCCONFIGR. These bits could theoretically be in any of the config
fields. Use the evsel__get_config_val() helper so it's agnostic to
which config field they are in.
The kernel will also stop publishing the TRCCONFIGR register bits in a
header [1] so preempt that by defining them here.
[1]: https://lore.kernel.org/linux-arm-kernel/20251128-james-cs-syncfreq-v8-10-4d319764cc58@linaro.org/
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf only looks at attr.config when determining what was programmed into
ETMCR. These bits could theoretically be in any of the config fields.
Add a generic helper to find the value of any named format field in any
config field and then use it to get the attributes relevant to ETMCR.
The kernel will also stop publishing the ETMCR register bits in a header
[1] so preempt that by defining them here.
Move field_prep() to util.h so we can define it along side field_get().
Unfortunately FIELD_PREP() and FIELD_GET() from the kernel can't be used
as they require the mask to be a compile time constant.
[1]: https://lore.kernel.org/linux-arm-kernel/20251128-james-cs-syncfreq-v8-10-4d319764cc58@linaro.org/
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This pattern occurs a few times and we'll add another one later, so add
a helper function for it.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test that evsel__set_config_if_unset() behaves as expected. This also
tests the user config change tracking mechanism as it depends on it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Requiring the 'pmu->perf_event_attr_init_default' callback to be set to
track user changes is a bit of a trap to fall in. It's hard to see that
this is required when depending on the user change tracking.
It's possible to want all 0 defaults so not set it, but at the same time
still do some programmatic setting of configs with
evsel__set_config_if_unset(). Also if a PMU reverts to 0 defaults and
deletes its existing callback, it will silently break existing uses of
evsel__set_config_if_unset().
One way to fix this would be to assert in evsel__set_config_if_unset()
if the changes weren't tracked, but that would be a possibly untested
runtime failure. Instead, always track it as it's harmless and
simplifies testing too.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This will be used by aux PMUs to read an already written value for
configuring their events and for also testing.
Its helper perf_pmu__format_unpack() does the opposite of the existing
pmu_format_value() so rename that one to perf_pmu__format_pack() so it's
clear how they are related.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Misleadingly, evsel__set_config_if_unset() only works with the config
field and not config1, config2, etc. This is fine at the moment because
all users of it happen to operate on bits that are in that config field.
Fix it before there are any new users of the function which operate on
bits in different config fields.
In theory it's also possible for a driver to move an existing bit to
another config field and this fixes that scenario too, although this
hasn't happened yet either.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we only track which bits were set by the user in attr->config.
But all configN fields should be treated equally as they can all have
default and user overridden values.
Track them all by making get_config_chgs() generic and calling it once
for each config value.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sparse config fields are technically supported although currently
unused. field_prep() only works for contiguous bitfields so replace it
with pmu_format_value().
pmu_format_value() also takes a bitmap rather than a u64 so replace
'u64 bits' with format->bits.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
At least one of these were put here to avoid a Python binding linking
issue which is no longer present. Put them back in their correct
location to avoid confusion about which file to add a new evsel__*
function to later.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/ZEbAS2yx2fguW60w@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make the evsel argument first to match the other evsel__* functions
and remove the redundant pmu argument, which can be accessed via evsel.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The ADD_CONFIG_TERM() macros build the __type argument out of a partial
EVSEL__CONFIG_TERM_x enum name. This means that they can't be called
from a function where __type is a variable and it's also impossible to
grep the codebase to find usages of these enums as they're never typed
in full.
Fix this by removing the macros and replacing them with an
add_config_term() function. It seems the main reason these existed in
the first place was to avoid type punning and to write to a specific
field in the union, but the same thing can be achieved with a single
write to a u64 'val' field.
Running the Perf tests with "-fsanitize=undefined -fno-sanitize-recover"
results in no new issues as a result of this change.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test for VMLOAD/VMSAVE in an L2 guest. The test verifies that L1
intercepts for VMSAVE/VMLOAD always work regardless of
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK.
Then, more interestingly, it makes sure that when L1 does not intercept
VMLOAD/VMSAVE, they work as intended in L2. When
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is enabled by L1, VMSAVE/VMLOAD from
L2 should interpret the GPA as an L2 GPA and translate it through the
NPT. When VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is disabled by L1,
VMSAVE/VMLOAD from L2 should interpret the GPA as an L1 GPA.
To test this, put two VMCBs (0 and 1) in L1's physical address space,
and have a single L2 GPA where:
- L2 VMCB GPA == L1 VMCB(0) GPA
- L2 VMCB GPA maps to L1 VMCB(1) via the NPT in L1.
This setup allows detecting how the GPA is interpreted based on which L1
VMCB is actually accessed.
In both cases, L2 sets KERNEL_GS_BASE (one of the fields handled by
VMSAVE/VMLOAD), and executes VMSAVE to write its value to the VMCB. The
test userspace code then checks that the write was made to the correct
VMCB (based on whether VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is set by L1),
and writes a new value to that VMCB. L2 then executes VMLOAD to load the
new value and makes sure it's reflected correctly in KERNERL_GS_BASE.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-4-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
strerror() has thread safety issues, strerror_r() requires stack
allocated buffers.
Code in perf has already been using the "%m" formatting flag that is a
widely support glibc extension to print the current errno's description.
Expand the usage of this formatting flag and remove usage of
strerror()/strerror_r().
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yunseong Kim <ysk@kzalloc.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's a lot of infrastructure for generating a relatively simple
array used by one function.
Move the array into the function and remove the supporting build logic.
At the same time opportunistically const-ify the array.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add metrics taken from Section 1.2 "Performance Measurement" of the
Performance Monitor Counters for AMD Family 1Ah Model 50h-57h Processors
document available at the link below.
The recommended metrics are sourced from Table 1 "Guidance for Common
Performance Statistics with Complex Event Selects".
The pipeline utilization metrics are sourced from Table 2 "Guidance
for Pipeline Utilization Analysis Statistics". These are useful for
finding performance bottlenecks by analyzing activity at different
stages of the pipeline. There are metric groups available for Level 1
and Level 2 analysis.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=309149
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add uncore events taken from Section 1.6 "L3 Cache Performance Monitor
Counters" and Section 2.2 "UMC Performance Monitor Events" of the
Performance Monitor Counters for AMD Family 1Ah Model 50h-57h Processors
document available at the link below.
This constitutes events which capture L3 cache and UMC command activity.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=309149
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add core events taken from Section 1.5 "Core Performance Monitor
Counters" of the Performance Monitor Counters for AMD Family 1Ah Model
50h-57h Processors document available at the link below.
This constitutes events which capture information on op dispatch,
execution and retirement, branch prediction, L1 and L2 cache activity,
TLB activity, etc.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=309149
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a regular expression in the map file so that appropriate JSON event
files are used for AMD Zen 6 processors. Restrict the regular expression
for AMD Zen 5 processors to known model ranges since they also belong to
Family 1Ah.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
[ Moved this one to the front of the series to keep the tree bisectable, as per Ian Rogers suggestion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch add the OpenHW Core-V CVA6 Risc-V JSON file.
For more info:
https://openhwfoundation.org/news/2023/11/07/openhw-group-announces-core-v-cva6-platform-project-for-risc-v-software-development-and-testing/
Signed-off-by: Manuel Hernández Méndez <manuel.hernandez@openchip.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of calling memstress_setup_ept_mappings() only in the first
iteration in the loop, move it before the loop.
The call needed to happen within the loop before commit e40e72fec0de
("KVM: selftests: Stop passing VMX metadata to TDP mapping functions"),
as memstress_setup_ept_mappings() used to take in a pointer to vmx_pages
and pass it into tdp_identity_map_1g() (to get the EPT root GPA). This
is no longer the case, as tdp_identity_map_1g() gets the EPT root
through stage2 MMU.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260113171456.2097312-1-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that get/put_unaligned() use memcpy() the -Wpacked and -Wattributes
warnings don't need disabling anymore.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251016205126.2882625-5-irogers@google.com
|
|
To pick up the changes in:
vdso: Switch get/put_unaligned() from packed struct to memcpy
As the code is dependent on __unqual_scalar_typeof, update also the tools
version of compiler_types.h to include this.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251016205126.2882625-4-irogers@google.com
|
|
The cache parameter of getcpu() is useless nowadays for various reasons.
* It is never passed by userspace for either the vDSO or syscalls.
* It is never used by the kernel.
* It could not be made to work on the current vDSO architecture.
* The structure definition is not part of the UAPI headers.
* vdso_getcpu() is superseded by restartable sequences in any case.
Remove the struct and its header.
As a side-effect this gets rid of an unwanted inclusion of the linux/
header namespace from vDSO code.
[ tglx: Adapt to s390 upstream changes */
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://patch.msgid.link/20251230-getcpu_cache-v3-1-fb9c5f880ebe@linutronix.de
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK in riscv JIT (Menglong
Dong)
- Fix reference count leak in bpf_prog_test_run_xdp() (Tetsuo Handa)
- Fix metadata size check in bpf_test_run() (Toke Høiland-Jørgensen)
- Check that BPF insn array is not allowed as a map for const strings
(Deepanshu Kartikey)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
bpf: Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str()
selftests/bpf: Update xdp_context_test_run test to check maximum metadata size
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
riscv, bpf: Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK
|
|
The ldimm64 instruction for map value supports an offset.
For insn array maps it wasn't tested before, as normally
such instructions aren't generated. However, this is still
possible to pass such instructions, so add a few tests to
check that correct offsets work properly and incorrect
offsets are rejected.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260111153047.8388-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF verifier was recently updated to treat pointers to struct types
returned from BPF kfuncs as implicitly trusted by default. Add a new
test case to exercise this new implicit trust semantic.
The KF_ACQUIRE flag was dropped from the bpf_get_root_mem_cgroup()
kfunc because it returns a global pointer to root_mem_cgroup without
performing any explicit reference counting. This makes it an ideal
candidate to verify the new implicit trusted pointer semantics.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-3-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Teach the BPF verifier to treat pointers to struct types returned from
BPF kfuncs as implicitly trusted (PTR_TO_BTF_ID | PTR_TRUSTED) by
default. Returning untrusted pointers to struct types from BPF kfuncs
should be considered an exception only, and certainly not the norm.
Update existing selftests to reflect the change in register type
printing (e.g. `ptr_` becoming `trusted_ptr_` in verifier error
messages).
Link: https://lore.kernel.org/bpf/aV4nbCaMfIoM0awM@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The RPS bitmask bounds check uses ~(RPS_MAX_CPUS - 1) which equals ~15 =
0xfff0, only allowing CPUs 0-3.
Change the mask to ~((1UL << RPS_MAX_CPUS) - 1) = ~0xffff to allow CPUs
0-15.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112173715.384843-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The toeplitz.py test passed the hex mask without "0x" prefix (e.g.,
"300" for CPUs 8,9). The toeplitz.c strtoul() call wrongly parsed this
as decimal 300 (0x12c) instead of hex 0x300.
Pass the prefixed mask to toeplitz.c, and the unprefixed one to sysfs.
Fixes: 9cf9aa77a1f6 ("selftests: drv-net: hw: convert the Toeplitz test to Python")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112173715.384843-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases that verify that when the "onlink" keyword is specified,
both address families (with and without VRF) accept routes with a
gateway address that is reachable via a different interface than the one
specified.
Output without "ipv6: Allow for nexthop device mismatch with "onlink"":
# ./fib-onlink-tests.sh | grep mismatch
TEST: nexthop device mismatch [ OK ]
TEST: nexthop device mismatch [ OK ]
TEST: nexthop device mismatch [FAIL]
TEST: nexthop device mismatch [FAIL]
Output with "ipv6: Allow for nexthop device mismatch with "onlink"":
# ./fib-onlink-tests.sh | grep mismatch
TEST: nexthop device mismatch [ OK ]
TEST: nexthop device mismatch [ OK ]
TEST: nexthop device mismatch [ OK ]
TEST: nexthop device mismatch [ OK ]
That is, the IPv4 tests were always passing, but the IPv6 ones only pass
after the specified patch.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260111120813.159799-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A multicast gateway address should be rejected when "onlink" is
specified, but it is only tested as part of the IPv6 tests. Add an
equivalent IPv4 test.
# ./fib-onlink-tests.sh -v
[...]
COMMAND: ip ro add table 254 169.254.101.12/32 via 233.252.0.1 dev veth1 onlink
Error: Nexthop has invalid gateway.
TEST: Invalid gw - multicast address [ OK ]
[...]
COMMAND: ip ro add table 1101 169.254.102.12/32 via 233.252.0.1 dev veth5 onlink
Error: Nexthop has invalid gateway.
TEST: Invalid gw - multicast address, VRF [ OK ]
[...]
Tests passed: 37
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260111120813.159799-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The command in the test fails as expected because IPv6 forbids a nexthop
device mismatch:
# ./fib-onlink-tests.sh -v
[...]
COMMAND: ip -6 ro add table 1101 2001:db8:102::103/128 via 2001:db8:701::64 dev veth5 onlink
Error: Nexthop has invalid gateway or device mismatch.
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
[...]
Where:
# ip route get 2001:db8:701::64 vrf lisa
2001:db8:701::64 dev veth7 table 1101 proto kernel src 2001:db8:701::1 metric 256 pref medium
This is in contrast to IPv4 where a nexthop device mismatch is allowed
when "onlink" is specified:
# ip route get 169.254.7.2 vrf lisa
169.254.7.2 dev veth7 table 1101 src 169.254.7.1 uid 0
# ip ro add table 1101 169.254.102.103/32 via 169.254.7.2 dev veth5 onlink
# echo $?
0
Remove these tests in preparation for aligning IPv6 with IPv4 and
allowing nexthop device mismatch when "onlink" is specified.
A subsequent patch will add tests that verify that both address families
allow a nexthop device mismatch with "onlink".
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260111120813.159799-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the test description, these tests fail because of a wrong
nexthop device:
# ./fib-onlink-tests.sh -v
[...]
COMMAND: ip ro add table 254 169.254.101.102/32 via 169.254.3.1 dev veth1 onlink
Error: Nexthop has invalid gateway.
TEST: Gateway resolves to wrong nexthop device [ OK ]
COMMAND: ip ro add table 1101 169.254.102.103/32 via 169.254.7.1 dev veth5 onlink
Error: Nexthop has invalid gateway.
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
[...]
But this is incorrect. They fail because the gateway addresses are local
addresses:
# ip -4 address show
[...]
28: veth3@if27: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link-netns peer_ns-Urqh3o
inet 169.254.3.1/24 scope global veth3
[...]
32: veth7@if31: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master lisa state UP group default qlen 1000 link-netns peer_ns-Urqh3o
inet 169.254.7.1/24 scope global veth7
Therefore, using a local address that matches the nexthop device fails
as well:
# ip ro add table 254 169.254.101.102/32 via 169.254.3.1 dev veth3 onlink
Error: Nexthop has invalid gateway.
Using a gateway address with a "wrong" nexthop device is actually valid
and allowed:
# ip route get 169.254.1.2
169.254.1.2 dev veth1 src 169.254.1.1 uid 0
# ip ro add table 254 169.254.101.102/32 via 169.254.1.2 dev veth3 onlink
# echo $?
0
Remove these tests given that their output is confusing and that the
scenario that they are testing is already covered by other tests.
A subsequent patch will add tests for the nexthop device mismatch
scenario.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260111120813.159799-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test using large chunks for zcrx memory area.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
|
|
GRO test groups the cases into categories, e.g. "tcp" case
checks coalescing in presence of:
- packets with bad csum,
- sequence number mismatch,
- timestamp option value mismatch,
- different TCP options.
Since we now have TAP support grouping the cases like that
lowers our reporting granularity. This matters even more for
NICs performing HW GRO and LRO since it appears that most
implementation have _some_ bugs. Flagging the whole group
of tests as failed prevents us from catching regressions
in the things that work today.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260113000740.255360-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Run the test against HW GRO and LRO. NICs I have pass the base cases.
Interestingly all are happy to build GROs larger than 64k.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260113000740.255360-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to do a lot more feature handling to test HW-GRO and LRO.
Clean up the feature handling for SW GRO a bit to let the next commit
focus on the new test cases, only.
Make sure HW GRO-like features are not enabled for the SW tests.
Be more careful about changing features as "nothing changed"
situations may result in non-zero error code from ethtool.
Don't disable TSO on the local interface (receiver) when running over
netdevsim, we just want GSO to break up the segments on the sender.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260113000740.255360-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that cmd() can be printed directly remove the old formatting.
Before:
# fragmented ip6 doesn't coalesce:
# Expected {200 100 100 }, Total 3 packets
# Received {200 100 }, Total 2 packets.
# /root/ksft-net-drv/drivers/net/gro: incorrect number of packets
Now:
# CMD: drivers/net/gro --ipv6 --dmac 9e:[...]
# EXIT: 1
# STDOUT: fragmented ip6 doesn't coalesce:
# STDERR: Expected {200 100 100 }, Total 3 packets
# Received {200 100 }, Total 2 packets.
# /root/ksft-net-drv/drivers/net/gro: incorrect number of packets
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260113000740.255360-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
