blob: cdc45ade9e0d9e4c760ca8f05e9228bfe39ff12b (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
.. SPDX-License-Identifier: GPL-2.0
=============
NPCM Watchdog
=============
The NPCM watchdog driver can report reset-cause information on
``nuvoton,npcm750-wdt`` and ``nuvoton,npcm845-wdt`` systems.
Userspace can read the latched reset cause through
``WDIOC_GETBOOTSTATUS``. When ``CONFIG_WATCHDOG_SYSFS`` is enabled, the
same value is also visible through ``/sys/class/watchdog/watchdogN/bootstatus``.
The mapping is fixed in the driver. It exposes the SoC reset indications
through the generic watchdog bootstatus flags and is not configurable from
Device Tree.
.. list-table:: Reset-cause mapping
:header-rows: 1
* - Platform
- Reset indication
- Bootstatus flag
- Reported meaning
* - NPCM750 and NPCM845
- ``PORST``
- ``WDIOF_OVERHEAT``
- power-on reset
* - NPCM750 and NPCM845
- ``CORST``
- ``WDIOF_FANFAULT``
- core reset
* - NPCM750 and NPCM845
- ``SWR1RST``
- ``WDIOF_EXTERN1``
- software reset source 1
* - NPCM750 and NPCM845
- ``SWR2RST``
- ``WDIOF_EXTERN2``
- software reset source 2
* - NPCM750 and NPCM845
- ``SWR3RST``
- ``WDIOF_POWERUNDER``
- software reset source 3
* - NPCM750
- ``SWR4RST``
- ``WDIOF_POWEROVER``
- software reset source 4
* - NPCM845
- ``TIP reset`` (``INTCR2[25]``)
- ``WDIOF_POWEROVER``
- TIP reset
``WDIOF_CARDRESET`` is reported only for the watchdog instance whose own
reset-status bit is latched. On systems with three watchdog instances, this
maps ``WD0RST``, ``WD1RST``, and ``WD2RST`` to ``watchdog0``, ``watchdog1``,
and ``watchdog2`` respectively.
The driver may report ``WDIOF_CARDRESET`` together with one or more of the
reset-cause flags listed above.
On NPCM750, the driver samples ``RESSR``. When reset bits are still latched,
it clears them and stores the sampled value in ``SCRPAD2`` so later watchdog
probes can report the same boot-time state.
On NPCM845, the driver samples ``INTCR2``. When reset bits are still latched,
it clears them and stores the sampled value in ``SCRPAD10`` so later watchdog
probes can report the same boot-time state.
The WPCM450 watchdog continues to operate without this reset-indication
mapping.
|
